Fuzzy Tracking Control of the 3PRR Parallel Rehabilitation Robot
Subject Areas :
Mechanical Engineering
Moosarreza Shamsyeh Zahedi
1
,
Zahra Fathipour
2
,
Majid Anjidani
3
1 - Department of Mathematics,
Payame Noor University, Tehran, Iran
2 - Department of Mathematics,
Payame Noor University, Tehran, Iran
3 - Department of Computer Engineering and Information Technology,
Payame Noor University, Tehran, Iran
Received: 2022-07-02
Accepted : 2022-10-12
Published : 2022-12-01
Keywords:
walking operation,
fuzzy tracking control,
Rehabilitation,
3PRR parallel robot,
Modeling,
Abstract :
In this study, a couple of 3PRR parallel robot is used for the rehabilitation process of a patient to eliminate a walking disability and leads to his treatment. The 3PRR robot has three degrees of freedom, provided by three prismatic actuators. Also using a couple of them, can quickly rehabilitate and provide the rehabilitation movements of a patient in the walking process. In this study, the extraction of kinematic and dynamic Equations of the robot was investigated, and a fuzzy-logic-based controller is performed. This controller has the ability to repel unwanted disturbances to follow the desired path. All modelling was simulated by MATLAB software. The simulation results show that using the mathematical model and controller, it is easy to go any desired path in the workspace; and this controller will be able to repel environmental disturbances like the sudden movement of patients.
References:
Wolfe, C. D., The Impact of Stroke, British Medical Bulletin, Vol. 56, No. 2, 2000, pp. 275-286.
Tyson, S. F., Hanley, M., Chillala, J., Selley, A., and Tallis, R. C., Balance Disability After Stroke, Physical Therapy, Vol. 86, No. 1, 2006, pp. 30-38.
French, B., Thomas, L. H., Leathley, M. J., Sutton, C. J., McAdam, J., Forster, A., and Watkins, C. L., Does Repetitive Task Training Improve Functional Activity After Stroke? A Cochrane Systematic Review and Meta-Analysis, Journal of Rehabilitation Medicine, Vol. 42, No. 1, 2010, pp. 9-15.
Wang, M., Design and Analysis of an Adjustable Wrist Rehabilitation Robot, 2014: (PhD Thesis).
Siciliano, B., Khatib, O., Force Control, Luigi Villani, Joris De Schutter, Springer handbook of robotics. Springer-Verlag Berlin Heidelberg, 2008.
Mariani, B., Hoskovec, C., Rochat, S., Büla, C., Penders, and J., Aminian, K., 3D Gait Assessment in Young and Elderly Subjects Using Foot-Worn Inertial Sensors, Journal of Biomechanics, Vol. 43, No. 15, 2010, pp. 2999-3006.
Dadashi, F., Mariani, B., Rochat, S., Büla, C. J., Santos-Eggimann, B., and Aminian, K., Gait and Foot Clearance Parameters Obtained Using Shoe-Worn Inertial Sensors in a Large-Population Sample of Older Adults, Sensors, Vol. 14, No. 1, 2014, pp. 443-457.
Zhang, C., Lan, B., Matsuura, D., Mougenot, C., Sugahara, Y., and Takeda, Y., Kinematic Design of a Footplate Drive Mechanism Using a 3-DOF Parallel Mechanism for Walking Rehabilitation Coordinate, Journal of Advanced Mechanical Design, Systems, and Manufacturing, Vol. 12, No. 1, 2018, pp. JAMDSM0017-JAMDSM0017.
Valdez, S. I., Gutierrez-Carmona, I., Keshtkar, S., and Hernandez, E. E., Kinematic and Dynamic Design and Optimization of a Parallel Rehabilitation Robot, Intelligent Service Robotics, Vol. 13, No. 3, 2020, pp. 365-378.
Stewart, D., A Platform with Six Degrees of Freedom, Proceedings of the Institution of Mechanical Engineers, Vol. 180, No. 1, 1965, pp. 371-386.
Caro, S., Chablat, D., Ur-Rehman, R., Wenger, P., Multiobjective Design Optimization of 3–Prr Planar Parallel Manipulators, in Global Product Development: Springer, 2011, pp. 373-383.
Javid, G., Akbarzadeh, M. R., Akbarzadeh, A., Nabavi, S. N., Trajectory Tracking of 3-PRR Parallel Manipulator with PI Adaptive Fuzzy Terminal Prismatic Mode Controller, 1st International E-Conference on Computer and Knowledge Engineering (ICCKE), 2011, pp. 156-161: IEEE.
Si, G., Chu, M., Zhang, Z., Li, H., and Zhang, X., Integrating Dynamics into Design and Motion Optimization of a 3-PRR Planar Parallel Manipulator with Discrete Time Transfer Matrix Method, Mathematical Problems in Engineering, Vol. 1, No.1, 2020, pp. 126-131.
Staicu, S., Inverse Dynamics of the 3-PRR Planar Parallel Robot, Robotics and Autonomous Systems, Vol. 57, No. 5, 2009, pp. 556-563.
Zhang, X., Mills, J. K., Cleghorn, W. L., Effect of Axial Forces on Lateral Stiffness of a Flexible 3-PRR Parallel Manipulator Moving with High-Velocity, in 2008 International Conference on Information and Automation, 2008, pp. 1458-1463: IEEE.
Zhao, B., Zhang, X., Zhan, Z., Wu, Q., and Zhang, H., Multi-scale Graph-guided Convolutional Network with Node Attention for Intelligent Health State Diagnosis of a 3-PRR Planar Parallel Manipulator, IEEE Transactions on Industrial Electronics, Vol. 1, No. 1, 2021, pp. 556-563.
Kumar, P., Sudheer, A., Workspace Optimization of 3PRR Parallel manipulator for drilling operation using Genetic Algorithm, in Proceedings of the Advances in Robotics, 2017, pp. 1-5.
Selvakumar, A. A., Karthik, K., Kumar, A., Sivaramakrishnan, R., and Kalaichelvan, K., Kinematic and Singularity Analysis of 3 PRR Parallel Manipulator, in Advanced Materials Research, Vol. 403, 2012, pp. 5015-5021.
Li, Y., Xu, Q., Kinematics and Inverse Dynamics Analysis for a General 3-PRS Spatial Parallel Mechanism, Robotica, Vol. 23, No. 02, 2005, pp. 219-229.
Tsai, M. S., Yuan, W. H., Inverse Dynamics Analysis for a 3-PRS Parallel Mechanism Based on a Special Decomposition of The Reaction Forces, Mechanism and Machine Theory, Vol. 45, No. 11, 2010, pp. 1491-1508.
Tsai, M. S., Yuan, W. H., Dynamic Modeling and Decentralized Control of a 3 PRS Parallel Mechanism Based on Constrained Robotic Analysis, Journal of Intelligent & Robotic Systems, Vol. 63, No. 3-4, 2011, pp. 525-545.
Yuan, W. H., Tsai, M. S., A Novel Approach for Forward Dynamic Analysis of 3-PRS Parallel Manipulator with Consideration of Friction Effect, Robotics and Computer-Integrated Manufacturing, Vol. 30, No. 3, 2014, pp. 315-325.
Tourajizadeh, H., Gholami, O., Optimal Control and Path Planning of a 3PRS Robot Using Indirect Variation Algorithm, Robotica, Vol. 38, No. 5, 2020, pp. 903-924.
Tourajizadeh, H., Gholami, O., A New Optimal Method for Calculating the Null Space of a Robot using NOC Algorithm; Application on Parallel 3PRS Robot, ADMT Journal, Vol. 13, No. 1, 2020, pp. 1-15.
Azarafza, R., Mohammadhoseni, S., and Farrokhi, M., Free Chattering Fuzzy Sliding Mode Controllers to Robotic Tracking Problem, ADMT Journal, Vol. 5, No. 2, 2012.
Ghafouri, M., Daneshmand, S., Design and Evaluation of an Optimal Fuzzy Pid Controller for an Active Vehicle Suspension System, Transactions of Famena, Vol. 41, No. 2, 2017, pp. 29-44.
Vermeiren, L., Dequidt, A., Afroun, M., Guerra, and T. M., Motion Control of Planar Parallel Robot Using the Fuzzy Descriptor System Approach, ISA Transactions, Vol. 51, No. 5, 2012, pp. 596-608.
Spong, M. W., Hutchinson, S., Vidyasagar, M., Robot Modeling and Control, Jon Wiley & Sons, Inc., ISBN-100-471-649, 2005.
Jazar, R. N., Advanced Dynamics: Rigid Body, Multibody, and Aerospace Applications, John Wiley & Sons, 2011.
Liang C., M. Lance, G., A Differentiable Null Space Method for Constrained Dynamic Analysis, Journal of Mechanisms, Transmissions, and Automation in Design, Vol. 109, No. 3, 1987, pp. 405-411.
