Investigating Effect of Using Piezoelectric layers on the Forced Vibration of Circular Plates

Subject Areas : Mechanical Engineering

AliAkbar Jandaghian ¹ ()
AliAsghar Jafari ² ()

Received: 2011-11-27 Accepted : 2017-10-31 Published : 2012-12-01

Keywords:

Abstract :

This deals with the harmonic forced vibration of a circular plate surface bonded by two piezoelectric layers, based on the Kirchhoff plate model. The form of electric potential field in the piezoelectric layer is assumed such that the Maxwell static electricity equation is satisfied. The differential equations of motion are solved analytically for clamped edge boundary condition of the plate. The solutions are expressed by elementary Bessel functions. The results are verified by those obtained from finite-element analysis and results from others article.

References:

Optimization The High Speed Machining of Hardened AISI 4140 Steel Using Vapor Deposited Cutting Tools (Wear and Roughness)
Print Date : 2018-06-01
Genetic Algorithm and ANN for Estimation of SPIV of Micro Beams
Print Date : 2017-12-17
Estimation of Surface Roughness in Turning by Considering the Cutting Tool Vibration, Cutting Force and Tool Wear
Print Date : 2017-12-17
An Experimental Investigation on Comparison of the Similar and Dissimilar Resistance Spot Welding of St12 and Galvanized Steel using Design of Experiments
Print Date : 2018-06-01
Experimental Study on Magnetic Abrasive Honing of Inner Surface of Tube AISI304
Print Date : 2018-06-01
Corrosion Behavior Characterization of the Nugget Zone in Copper/Brass Metals of Dissimilar Friction Stir Welded Lap Joints
Print Date : 2018-03-01

Share To

Article Url

Investigating Effect of Using Piezoelectric layers on the Forced Vibration of Circular Plates