Airplane Design Process in the Base of Roskam Method and Application on Design of an Unmanned Air Vehicle

Subject Areas : Mechanical Engineering

MeharanAli Azizi ¹ ()
Hessam Salehipour ² ()
Sima Farazi ³ ()

Received: 2011-01-08 Accepted : 2017-10-31 Published : 2008-06-01

Keywords:

Abstract :

In This Article, an unmanned airplane vehicle (UAV) has been design using a new method(Roskam method). This design is based on the maximum payload of 4kg, maximum altitude of 2500m, cruise speed of 120 km/h at sea level and loiter of 60 min. Based on this, desing configuration of the UAV with the aim of patrolling, recognition, and data aquzation, has been done, and design parameters including three - view of airplane is presented.

References:

Optimization The High Speed Machining of Hardened AISI 4140 Steel Using Vapor Deposited Cutting Tools (Wear and Roughness)
Print Date : 2018-06-01
Genetic Algorithm and ANN for Estimation of SPIV of Micro Beams
Print Date : 2017-12-17
Estimation of Surface Roughness in Turning by Considering the Cutting Tool Vibration, Cutting Force and Tool Wear
Print Date : 2017-12-17
An Experimental Investigation on Comparison of the Similar and Dissimilar Resistance Spot Welding of St12 and Galvanized Steel using Design of Experiments
Print Date : 2018-06-01
Experimental Study on Magnetic Abrasive Honing of Inner Surface of Tube AISI304
Print Date : 2018-06-01
Corrosion Behavior Characterization of the Nugget Zone in Copper/Brass Metals of Dissimilar Friction Stir Welded Lap Joints
Print Date : 2018-03-01

Share To

Article Url

Airplane Design Process in the Base of Roskam Method and Application on Design of an Unmanned Air Vehicle