Optimal Design of a Novel Two-Branch Spray Painting Robot for Prescribed Process Space
Subject Areas : robotics
1 - Department of Mechanical Engineering, Najafabad Branch,
Islamic Azad University, Najababad, Iran
2 - Department of Mechanical Engineering, Najafabad Branch,
Islamic Azad University, Najababad, Iran
Keywords: Genetic Algorithm, Workspace Optimization, Painting Robot,
Abstract :
Painting of roadside blocks manually is costly and time-consuming and can cause road accidents for workers. This paper is devoted to the optimum design of a novel two-branch robot utilized as spray painting mechanism for side and top of the roadside blocks simultaneously. Considering painting process conditions and the block displacement pattern which can change both height and lateral location along the road, clear that the process could be carried out properly by means of two nozzles. Two planar process spaces are evolved in favour of two-dimensional paths where nozzles track during the process. A conceptual architecture is formed considering the same movements that nozzles are actuated to compensate the blocks’ horizontal displacements. One parallel and one serial manipulator of the robot structure a relation by common prismatic joint. Actuators are positioned close to the base of the truck so that dynamics of movable parts are to be improved logically. Due to the change in the height and lateral location of the blocks, position of joints be optimized in terms of stroke angle and process space could be best fitted into workspace, optimization problem is arisen and solved using Genetic algorithm (G.A.) which results in less angular stroke for lower nozzle and faster matching with block conditions. The optimized joint position and center of mass are far from the base, resulting in a large torque subjected to the base. To solve the problem, the joint position is shifted toward the base without a change in the optimum situation. Finally, results are studied and detailed further.
[1]Zhang, C., Zhang, L., Kinematics Analysis and Workspace Investigation of a Novel 2-DOF Parallel Manipulator Applied in Vehicle Driving Simulator, Robotics and Computer-Integrated Manufacturing, Vol. 29, No. 4, 2013, pp. 113-120.
[2] Nubiola, A. A., Bonev, I., Absolute Calibration of an ABB IRB 1600 Robot Using a Laser Tracker, Robotics and Computer-Integrated Manufacturing, Vol. 29, No. 1, 2013, pp. 236-245.
[3] Song, Y., Gao, H., Sun, T., Dong, G., Lian, B., and Qi, Y., Kinematic Analysis and Optimal Design of a Novel 1T3R Parallel Manipulator with an Articulated Travelling Plate, Robotics and Computer-Integrated Manufacturing, Vol. 30, No. 5, 2014, pp. 508-516.
[4] Leali, F., Vergnano, A., Pini, F., Pellicciari, M., and Berselli, G., A Workcell Calibration Method for Enhancing Accuracy in Robot Machining of Aerospace Parts, The International Journal of Advanced Manufacturing Technology, Vol. 85, No. 1-4, 2016, pp. 47-55.
[5] Li, Y., Xu, Q., Concept Design and Dynamic Modeling of a Medical Parallel Manipulator to Assist in Cardiopulmonary Resuscitation, Canadian Conference on Electrical and Computer Engineering, Saskatoon, Canada, 2005, pp. 842- 845.
[6] Voros, S., Haber, G. P., Menudet, J. F., Long, J. A., and Cinquin, P., ViKY Robotic Scope Holder: Initial Clinical Experience and Preliminary Results Using Instrument Tracking, IEEE/ASME Transactions on Mechatronics, Vo. 15, No. 6, 2010, pp. 879-886.
[7] Atkinson, J., Hartmann, J., Jones, S., and Gleeson, P., Robotic Drilling System for 737 Aileron, SAE Technical Paper 2007-01-3821, Los Angeles, CA, 2007, pp. 3821-3826.
[8] Webb, P., Eastwood, S., Jayaweera, N., and Chen, Y., Automated Aerostructure Assembly, Industrial Robot: An International Journal, Vol. 32, No. 5, 2005, pp. 383-387.
[9] Cash, M. F., Anderson, E. H., Sneed, R., and Pettit, G. W., Precision Pointing Parallel Manipulator Design for Asymmetric Geometries and Cryogenic Vacuum Environments, American Society for Precision Engineering (ASPE) Annual Meeting, Norfolk, VA, USA, 2005, pp.1821-1824.
[10] Chung, G. J., Choi, K. B., Development of Nano Order Manipulation System Based on 3- PPR Planar Parallel Mechanism, Proceedings of the IEEE International Conference on Robotics and Biomimetics, Shenyang, China, 2004, pp. 612-616.
[11] Xu, Q., Li, Y., Mechanical Design of Compliant Parallel Micromanipulator for Nano Scale Manipulation, Proceedings of the IEEE International Conference on Nano/Micro Engineered and Molecular Systems, Zhuhai, China, 2006, pp. 653-657.
[12] Woo, S., Hong, D., Lee, W. C., Chung, J. H., and Kim, T. H., A Robotic System for Road Lane Painting, Automation in Construction, Vo. 17, No. 2, 2008, pp. 122-129.
[13] Hong, D., Lee, W. C., Chu, B., Kim, T. H., and Choi, W. C., Gantry Robot with Extended Workspace for Pavement Sign Painting Operations, Journal of Mechanical Science and Technology, Vol. 19, No. 6, 2005, pp. 1268-1279.
[14] Hong, D., Velinsky, S. A., and Yamazaki, K., Tethered Mobile Robot for Automating Highway Maintenance Operations, Robotics and Computer-Integrated Manufacturing, Vol. 13, No. 4, 1997, pp. 297-307.
[15] Oh, J. K., Jang, G., Oh, S., Lee, J. H., Yi, B. J., Moon, Y. S., Lee, J. S., and Choi, Y., Bridge Inspection Robot System with Machine Vision, Automation in Construction, Vo. 18, No. 7, 2009, pp. 929-941.
[16] Kotani, S., Yasutomi, S., Kin, X., Mori, H., Shigihara, S., and Matsumuro, Y., Image Processing and Motion Control of a Lane Mark Drawing Robot, International Conference on Intelligent Robots and Systems, Yokohama, Japan, 1993, pp. 1035–1041.
[17] Kotani, S., Mori, H., Shigihara, S., and Matsumuro, Y., Development of a Lane Mark Drawing Robot, Proceedings of IEEE International Symposium on Industrial Electronics, Santiago, Chile, 1994, pp. 320-325.
[18] Kochekali, H., Ravani, B., Feature Based Path Planning System for Robotic Stenciling of Roadway Markings, ASCE Specialty Conference on Robotics for Challenging Environments, Albuquerque, New Mexico, 1994, pp. 52-60.
[19] Lee, W. C., Shin, J. B., Shin, H. H., and Hong, D., Automation of Roadway Sign Painting Operations, Proc. of KSAE Spring Conference, 2002, pp. 1461-1466.
[20] Shin, H. H., Lee, W. C., Yoo, J. H., Hong, D., Choi, W. C., and Kim, T. R, Control Algorithm of Roadway Sign Painting Robot System, Proc. of KSPE Spring Conference, 2003, pp. 1723-1727.
[21] Hong, D., Lee, W., Chu, B., and Kim, T., Gantry Robot with Extended Workspace for Pavement Sign Painting Operations, Journal of Mechanical Science and Technology, Vol. 19, No. 6, 2005, pp. 1268-1279.
[22] Ali, M. A. H., Yusoff, W. A. B. W., Hamedon, Z. B., Yussof, Z. B. M., and Mailah, M., Mechatronic Design and Development of an Autonomous Mobile Robotics System for Road Marks Painting, IEEE Industrial Electronics and Applications Conference (IEACon), Kota Kinabalu, Malaysia, 2016, pp. 336-341.
[23] Jali, M. K. M., Mailah, M., and Ghadim, S., Mechatronic Design and Development of a Semi-Automated On-The-Road Painting Machine, Jurnal Mekanikal, Vol. 39, No. 2, 2016, pp. 39-51.
[24] Tsai, K. Y., Huang, K. D., The Design Considerations of Manipulators, Proceedings of the ASME Design Engineering Technical Conference and Computers and Information in Engineering Conference, Baltimore, 2000.
[25] Panda, A. S., Mishra, A. D., and Biswal, B. B., Revolute Manipulator Workspace Optimization: A Comparative Study, Applied Soft Computing, Vol. 13, No. 2, 2013, pp. 899-910.
[26] Agheli, M. S., Nestinger, S., Comprehensive Closed-Form Solution for the Reachable Workspace of 2-RPR Planar Parallel Mechanisms, Mechanism and Machine Theory, Vol. 74, April, 2014, pp. 102-116.
[27] Bai, S., Optimum Design of Spherical Parallel Manipulators for a Prescribed Workspace, Mechanism and Machine Theory, Vol. 45, No. 2, 2010, pp. 200-211.
[28] Coppola, G., Zhang, D., and LiuA, K., A 6-DOF Reconfigurable Hybrid Parallel Manipulator, Robotics and Computer-Integrated Manufacturing, Vol. 30, No. 2, 2014, pp. 99-106.
[29] Pessi, P., Wu, H., Handroos, H., and Jones, L., A Mobile Robot with Parallel Kinematics to Meet the Requirements for Assembling and Machining the ITER Vacuum Vessel, Fusion Engineering and Design, Vol. 82, No. 15-24, 2007, pp. 2047-2054.
[30] Gosselin, C. M., Guillot, M., The Synthesis of Manipulators with Prescribed Workspace, Journal of Mechanical Design, Vol. 113, No. 4, 1991, pp. 451-455.
[31] Laribi, M. A., Romdhane, L., and Zeghloul, S., Analysis and Dimensional Synthesis of the DELTA Robot for a Prescribed Workspace, Mechanism and Machine Theory, Vol. 42, No. 7, 2007, pp. 859-870.
[32] Boudreau, R., Gosselin, C. M., The Synthesis of Planar Parallel Manipulators with a Genetic Algorithm, Journal of Mechanical Design, Vol. 121, No. 4, 1999, pp. 533-537.
[33] Rao, N. M., Rao, K. M., Multi-Position Dimensional Synthesis of a Spatial 3-RPS Parallel Manipulator, Journal of Mechanical Design, Vol. 128, No. 4, 2006, pp. 815-819.
[34] Zhen, G., Dan, Z., and Yunjian, G., Design Optimization of a Spatial Six Degree-of-Freedom Parallel Manipulator Based on Artificial Intelligence Approaches, Robotics and Computer-Integrated Manufacturing, Vol. 26, No. 2, 2010, pp. 180-189.
[35] Wu, G., Caro, S., Shaoping, B., and Kepler, J., Dynamic Modeling and Design Optimization of a 3-DOF Spherical Parallel Manipulator, Robotics and Autonomous Systems, Vol. 62, No. 10, 2014, pp. 1377-1386.
[36] Rao, N. M., Rao, K. M., Dimensional Synthesis of a Spatial 3-RPS Parallel Manipulator for a Prescribed Range of Motion of Spherical Ioints, Mechanism and Machine Theory, Vol. 44, No. 2, 2009, pp. 477-486.
[37] Rao, N. M., Synthesis of a Spatial 3-RPS Parallel Manipulator Based on Physical Constraints Using Hybrid GA Simplex Method, The International Journal of Advanced Manufacturing Technology, Vol. 52, No. 5-8, 2011, pp. 777-787.