• فهرست مقالات Traveling wave tube (TWT)

      • دسترسی آزاد مقاله

        1 - Nonlinear study of injection process types into the traveling wave tube with hollow electron beam
        H. Bayati S. Saviz A. H. Sari
        AbstractIn this paper, examples of all types of signal injection such as different signal , harmonic signal and multiple signal injections in a TWT including hollow electron beam near frequency 1800 MHz and within input powers lower than TWT saturation power has been an چکیده کامل
        AbstractIn this paper, examples of all types of signal injection such as different signal , harmonic signal and multiple signal injections in a TWT including hollow electron beam near frequency 1800 MHz and within input powers lower than TWT saturation power has been analyzed using approximate analytical solution of S-MUSE model. Later, the results obtained from approximate analytical solution with large signal code LATTE, that is a Lagrangian model, have been tested and simulated so that the effect of input phase difference between drive and injected wave and the effect of input powers on the amplification value of drive and generated second-order harmonic waves were investigated. The phase difference between drive and harmonic waves is a key parameter in harmonic injection for increasing the output power of drive and second-order harmonic frequencies. پرونده مقاله
      • دسترسی آزاد مقاله

        2 - The new wave-ring helical (WRH) slow-wave structure for traveling wave tube amplifiers
        Nasser Panahi S. Saviz M. Ghorannevis
        AbstractIn this paper, the new slow-wave structure called wave-ring helix to enhance the power of the traveling wave tubes is introduced. In this new structure, without increasing the length and radius of the helix, the wave motion path can be increased to radiofrequenc چکیده کامل
        AbstractIn this paper, the new slow-wave structure called wave-ring helix to enhance the power of the traveling wave tubes is introduced. In this new structure, without increasing the length and radius of the helix, the wave motion path can be increased to radiofrequency wave in phase with the electron beam. The results show that in the special frequency range the output power and gain are greater than conventional helix. In this paper, optimization results are presented in cold and hot tests on the new structure. The software CST is used in S-band frequency range. پرونده مقاله