-
دسترسی آزاد مقاله
1 - تغییر حدود آتربرگ و پارامترهای منحنی رطوبتی آب در خاک لس حاوی نانورس مونت موریلونایت
زهرا درویش ایوری سهیلا ابراهیمی سید علیرضا موحدی نائینی مهدی ذاکری نیابهسازی خاک لسی، میتواند سبب افزایش استحکام، مقاومت و تغییر یا اصلاح ویژگیهای مکانیکی آنها گردد. هدف از انجام این پژوهش، بررسی تغییرات پارامترهای منحنی رطوبتی (چگونگی نگهداشت آب در خاک) و برخی شاخصهای مکانیکی (پایش استحکام و مقاومت مکانیکی) خاک لسی شن لومی حاوی نانور چکیده کاملبهسازی خاک لسی، میتواند سبب افزایش استحکام، مقاومت و تغییر یا اصلاح ویژگیهای مکانیکی آنها گردد. هدف از انجام این پژوهش، بررسی تغییرات پارامترهای منحنی رطوبتی (چگونگی نگهداشت آب در خاک) و برخی شاخصهای مکانیکی (پایش استحکام و مقاومت مکانیکی) خاک لسی شن لومی حاوی نانورسهای مونتموریلونایت بود. بدین منظور، باتیمارهای 1 و 5 درصد نانورس، میزان نگهداشت آب خاک با دو مدل ونگنوختن و بروکس- کوری، تغییرات پارامترهای رطوبتی و حدود آتربرگ در دو زمان ارزیابی شد. نتایج نشان داد که نانورس تأثیری معنیدار بر نگهداشت آب در مکشهای مختلف داشت و مقادیر آنرا، بخصوص در مکشهای پایین افزایش داد. همچنین سبب افزایش خلل و فرج ریز در نقطه ورود هوا شد که نشاندهندهی کاهش سرعت تخلیه آب و افزایش قابلیت نگهداشت آن در خاک سبک بود. در بررسی پارامتریک منحنی رطوبتی خاک- نانورس، با افزایش مقدار نانو رس، رطوبت اشباع Θs افزایش، لیکن، شیب منحنی رطوبتی خاک- نانورس (پارامترn) و فشار ورود هوا افزایش و مقدار α کاهش یافت. تغییر در رطوبت باقیماندهΘr قابلملاحظه نبود و روند افزایشی منطقی خاصی نشان نداد. پیشبینی پارامترهای معادله منحنی رطوبتی با استفاده از مدل وانگنوختن نتایج بهتری از مدل بروکس- کوری نشان داد. در بررسی شاخصهای مکانیکی، افزایش حدروانی (به میزان بیشتر) وحدخمیری و در نتیجه، افزایش شاخص پلاستیسیته (بهبود خصوصیات خمیری خاک) مشاهده شد. افزایش میزان سطح مخصوص و قدرت نگهداری آب توسط رسها و مقاومت برشی سطح رس میتواند دلیل این امر باشد. پایش حدود آتربرگ و پارامترهای منحنی رطوبتی با زمان، نشانگر مانایی آنها بود. پرونده مقاله -
دسترسی آزاد مقاله
2 - پایش انتقال نفت سفید و آب عبوری از خاک سبک حاوی نانورس مونتموریلونایت
شکوفه فضل علی سهیلا ابراهیمی مهدی ذاکر نیا سید علیرضا موحدی نائینیانتقال آب و آلاینده های آلی در محیط متخلخل خاک به خصوص در خاک های سبک بافت به علت توانایی ترابری بالا و ایجاد منابع ثانویه آلودگی اهمیت ویژه ای دارد. هدف از انجام این پژوهش، بررسی انتقال نفت سفید و آب از یک خاک سبک بافت حاوی تیمارهای مختلف نانورس مونت موریلونایت بود. بد چکیده کاملانتقال آب و آلاینده های آلی در محیط متخلخل خاک به خصوص در خاک های سبک بافت به علت توانایی ترابری بالا و ایجاد منابع ثانویه آلودگی اهمیت ویژه ای دارد. هدف از انجام این پژوهش، بررسی انتقال نفت سفید و آب از یک خاک سبک بافت حاوی تیمارهای مختلف نانورس مونت موریلونایت بود. بدین منظور تیمارهای وزنی صفر، 2، 4 و 6درصد از نانورس مونت موریلونایت - خاک شنی در سیستم قیف های حاوی کاغذ صافی مستقر اعمال گردیده، سپس تحت عبور نفت سفید و آب (4 حجم منفذی متناوب) قرار گرفت. بررسی منحنی های رخنه نشان داد، عبور آب با لختی (ماند) بیشتر، سرعت کمتر و شیب آرام تر صورت گرفته، لذا حجم نهایی خروجی آن در مقایسه با نفت سفید کمتر بود. به نظر می رسد مولکول های آب باقطری کمتر از 3/0 نانومتر به خوبی در فضای بین لایه ای کوچک نانورس قرار گرفته و ازسوی دیگر با پیوند هیدروژنی قوی نگهداشته می شوند. نفت سفید بدلیل دارا بودن هیدروکربورهایی با مولکول هایی دارای 11 تا 15 اتم کربن، که بسیار درشت تر از آب بوده و از سوی دیگر با دانسیته 78/0 تنها جذب مکان های سطحی شده و عبور بیشتری را از محیط متخلخل خاک داشته اند. در هر دو سیال عبوری، با افزایش درصد نانورس، نگهداشت نفت سفید و آب افزایش یافت. نتایج حاصل از پراش اشعه ایکس نیز نشان داد که فاصله لایه ای نانورس از 04/14 آنگستروم به 77/24 آنگسترم در حالت افزودن آب افزایش یافت. پرونده مقاله -
دسترسی آزاد مقاله
3 - Using Ghezeljeh Nanoclay for Measuring of Copper Ions Released from the Cooking Pot into Food Samples by FAAS and ICP-AES
Majid Soleimani Zahra Hassanzadeh SiahpooshGhezeljeh montmorillonite nanoclay was used as a natural adsorbent to measure and remove copper ions released from the cooking pot into food by applying the solid phase extraction (SPE) method in batch mode. The clay is characterized by using fourier transform infrar چکیده کاملGhezeljeh montmorillonite nanoclay was used as a natural adsorbent to measure and remove copper ions released from the cooking pot into food by applying the solid phase extraction (SPE) method in batch mode. The clay is characterized by using fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM) and X-ray diffractometry (XRD). The results of XRD and FT-IR of nanoclay confirm that montmorillonite is the dominant mineral phase. Based on SEM images of clay, it can be seen that the distance between the plates is Nano. The adsorbent was prepared using the Galehouse method and then a number of effective parameters on extraction were optimized using standard solutions: amount of adsorbent, eluent characteristics, pH and type of the buffer solutions, shaking time, adsorption temperature, volume of the standard solutions, and initial metal ion concentration. Also, the role of desorption and centrifugation time were explored. The limit of detection and quantification, preconcentration factor, and the adsorption capacity of the nanoclay were calculated. The method was applied to a variety of food materials to verify its efficiency. Subsequently, this method was applied to two Iranian stews cooked in copper pots plated with tin in order to measure the amount of copper released from the pot. The result suggests that the amounts of released copper and tin exceeded the tolerable daily intakes. In general, the removal of metal ions using the nanoclay proved to be rapid, efficient, reliable, and reproducible. پرونده مقاله -
دسترسی آزاد مقاله
4 - Voltammetric Investigation of Thioridazine Using a Carbon Nanocomposite Electrode in Human Biological Samples
Elham Eslami Fatemeh FarjamiAn electrochemical method employing a carbon nanocomposite electrode was developed to measure thioridazine. The electrode has been designed by incorporation of montmorillonite nanoclay into the carbon ionic liquid electrode. Surface morphology of the electrodes was d چکیده کاملAn electrochemical method employing a carbon nanocomposite electrode was developed to measure thioridazine. The electrode has been designed by incorporation of montmorillonite nanoclay into the carbon ionic liquid electrode. Surface morphology of the electrodes was done using scanning electron microscopy. Adsorptive stripping voltammetry was applied as a very sensitive analytical method for the determination of sub-micromolar amounts of thioridazine. The optimized linear working range and detection limit (S/N=3) are 0.1-50 μM and 21nM, respectively. The nanocomposite electrode demonstrates several advantages such as simple preparation method, excellent activity in physiological conditions, low detection limit, long-term stability, and remarkable voltammetric reproducibility. As a result, it can find promising applications in blood serum and urine samples. پرونده مقاله -
دسترسی آزاد مقاله
5 - Investigation on Failure Loads and Failure Modes for Two Parallel Pin-Loaded Holes Made from Unidirectional Glass-Epoxy Nanoclay Laminates
sajjad dehghanpour keivan hosseini safari Farzan Barati Mohammadmahdi AttarPurpose of this study is to obtain failure modes and failure loads of two Parallel pin loaded holes in unidirectional glass fibre/epoxy by adding nanoclay in the absence of nanoclay composite laminates using finite element analysis; the results are validated through exp چکیده کاملPurpose of this study is to obtain failure modes and failure loads of two Parallel pin loaded holes in unidirectional glass fibre/epoxy by adding nanoclay in the absence of nanoclay composite laminates using finite element analysis; the results are validated through experiment. The geometrical parameters studies in this survey include the distance between the diameter of the hole (e/d) and the free edge of specimen, the distance between two holes-to-hole diameter (M/d). The samples were exposed to constant speed tensile loading. The results showed that by adding nanoclay, failure load increases and failure modes varies from shear out to bearing failure. Furthermore, increasing distance from the free edge of the pin centre’s increases load bearing capacity of two type of composite materials and changes the failure mode from shear to the bear, it increases and decreases the distance from canter’s of pin in layers with and without nanoclay particles, respectively and changes failure mode from shear to bear mode. In order to find morphology of specimens and dispersion quality, Scanning Electron Microscope (SEM) was used. For predicting failure load and differentiating failure modes, Tsai-hill failure criteria associated with material property degradation is used. Experimental and FEM results indicate importance of considering the impact of e/d and M/d ratios in the design of two Parallel pin joints. ANSYS was used to carry out numerical simulation and the results denote a good agreement between numerical and experimental results. In this study, by designing an experimental and numerical procedure to estimate the effect of nanoclay, on failure mode and failure load of typical composite material, glass-epoxy, we could illustrate that adding nanoclay brought with it improvement of shear and tensional strength of glass-epoxy about 10 %. پرونده مقاله -
دسترسی آزاد مقاله
6 - Improved flame retardancy on polyester fabrics using chitosan-modified clay
Sima Habibi S Nourbakhsh SH HakimpourThe main objective of present work was improvement in flame retardancy (FR) of polyester fabric using modified clay as green flame retardant. Achieving mentioned purpose, first polyester fabric was alkaline treated then nanoclay was modified with chitosan to form organo چکیده کاملThe main objective of present work was improvement in flame retardancy (FR) of polyester fabric using modified clay as green flame retardant. Achieving mentioned purpose, first polyester fabric was alkaline treated then nanoclay was modified with chitosan to form organo-clay and used as FR finish to coat samples. The water absorption and bending resistance of pristine polyester, alkaline and modified clay-treated polyester were also measured to investigate physical properties of samples. Modified clay and surface treated polyester fabrics were characterized using X-ray diffraction (XRD), Fourier Transform Infrared spectrometer (FTIR/ATR) and scanning electron microscopy (SEM). It was concluded that chitosan- modified clay treatment has improving effect on flame retardancy of polyester samples through increase in limiting oxygen index (LOI), char yield and decrease in melt dripping while burning.Key Words: chitosan, nanoclay, polyester, alkaline treatment, Flame retardancy پرونده مقاله -
دسترسی آزاد مقاله
7 - Effect of Adding Nanoclay on the Mechanical Behaviour of Fine-grained Soil Reinforced with Polypropylene Fibers
Alireza Tabarsa SeyedJassem HosseiniIn this study the performance of clay nano-particles on the soil reinforced with Polypropylene fibers (PP-fiber) has been investigated. Also a series of investigations concerning the effect of random orientation of fibers on the engineering behaviour of soil were conduc چکیده کاملIn this study the performance of clay nano-particles on the soil reinforced with Polypropylene fibers (PP-fiber) has been investigated. Also a series of investigations concerning the effect of random orientation of fibers on the engineering behaviour of soil were conducted. Soil mixtures were modified with varying percentages of nanoclay and Fibers. Unconfined compressive strength (UCS), Compaction, Atterberg limits, and microstructural (scanning electron microscopy) tests were conducted. In order to understand the micromechanical behaviour of nanoclay in fiber reinforced soil, the microstructure and morphology of fracture surfaces of samples were studied using Scanning Electron Microscopy (SEM). It was found that the addition of nanoclay significantly improves the performance of fiber reinforced soil in a unique way. This paper presents the understanding of nanoclaybehaviour and its impact on the overall mechanical characteristic and laboratory performance of fiber reinforced soil. پرونده مقاله -
دسترسی آزاد مقاله
8 - Effect of nanoparticles on the improving mechanical behavior of GFRP composites in a corrosive environment
Yasaman Gitiara Reza Barbaz-Isfahani Saeed Saber-Samandari Mojtaba SadighiCorrosive environment can significantly effect on the mechanical behavior of composite structures which can improve by using hydrophobic nanoparticles. The aim of this study is to investigate the improvement of the mechanical properties of incorporated glass fiber reinf چکیده کاملCorrosive environment can significantly effect on the mechanical behavior of composite structures which can improve by using hydrophobic nanoparticles. The aim of this study is to investigate the improvement of the mechanical properties of incorporated glass fiber reinforced polymer (GFRP) composite specimens with 3 wt. % of nanoclay and nanosilica in a corrosive environment. Filled GFRP composites were fabricated using the mechanical stirrer following by sonication method, and the hand layup method. After preparing the neat and incorporated GFRP according to ASTM standards, all the samples were immersed in 5% sulfuric acid solution for 0, 1, and 3 months. As the immersion time increased, the samples containing nanosilica absorbed more water than the other samples. The tensile and compressive tests were performed at different immersion times to obtain the ultimate tensile and compressive strength and tensile modulus. The results showed that by adding nanoparticles, the mechanical properties were increased, which GFRP containing nanoclay showed a better behavior in the corrosive environment. By adding 3 wt. % of nanoclay, the ultimate tensile and compressive strength and the tensile modulus decreased after one month of immersion by only 0.34%, 1.81% and 2.95%, respectively, and after three months of immersion only decreased by 0.43%, 10.88% and 6.95%, respectively. Finally, SEM images of all specimens were examined to investigate the fracture mechanisms and the corrosion behavior of fabricated nanocomposites. پرونده مقاله -
دسترسی آزاد مقاله
9 - Application of nanoclay and nanofiber filters to reduce soil permeability and leachates from landfill liners: A Review
Mahdi Nikbakht Fariba Behrooz Sarand Rouzbeh Dabiri Masoud BonabThis study aimed to provide a comprehensive review study of the nanoclay and nanofiber filter application in landfilling stage for solid wastes to control the leachate leakage from landfill liners. The filtering is a key element in landfill liners that prevent the leach چکیده کاملThis study aimed to provide a comprehensive review study of the nanoclay and nanofiber filter application in landfilling stage for solid wastes to control the leachate leakage from landfill liners. The filtering is a key element in landfill liners that prevent the leachate from seepage which is the main factor in groundwater pollution. In this regard, providing new methods that are more adaptable to environmental conditions can be efficient. The presented paper is prepared as a review study on nanotechnology application in geotechnics that is used for preventing leachate leaks from landfills body specifically nanoclay and nanofibers. پرونده مقاله -
دسترسی آزاد مقاله
10 - بررسی حذف همزمان رنگزای بازینارنجی 2 و نیکل (II) از محلولهای آبی درحضور نانورس اصلاحشده در سامانه شویش پیوسته با بهکارگیری روش سطحپاسخ (RSM)
آرمین گروئیان علی نیازی الهه کنوزدر پژوهش حاضر، حذف رنگ بازی نارنجی 2 (BO2) و نیکل (II) از محلول های آبی با نانورس مونتموریلونیت (MMT) اصلاح شده مطالعه شد. برای تعیین ویژگی های جاذب، روش های FESEM و EDS-Mapping به کاربرده شد. فرایند حذف آلاینده ها از راه طراحی و ساخت ستون شویش پیوسته بررسی شد و اثر متغ چکیده کاملدر پژوهش حاضر، حذف رنگ بازی نارنجی 2 (BO2) و نیکل (II) از محلول های آبی با نانورس مونتموریلونیت (MMT) اصلاح شده مطالعه شد. برای تعیین ویژگی های جاذب، روش های FESEM و EDS-Mapping به کاربرده شد. فرایند حذف آلاینده ها از راه طراحی و ساخت ستون شویش پیوسته بررسی شد و اثر متغیرهای مؤثر بر فرایند شامل غلظت رنگ و نیکل (II)، pH، طول ستون و تعداد دفعه های شویش ارزیابی شد. روش طراحی آزمایش سطح پاسخ (RSM) با استفاده از طرح مرکب مرکزی (CCD) برای بررسی اثر عامل های آزمایشگاهی بر فرایند حذف هم زمان BO2 و نیکل (II) در سامانه پیوسته به کاربرده شد و برهم کنش متغیرها با نمودار های سطح پاسخ مطالعه شد. با توجه به نتیجه های RSM و بهینه سازی حذف هم زمان حذف رنگزای بازی نارنجی 2 و نیکل (II) با به کارگیری تابع مطلوب بودن، مقادیر بهینه برای پنج متغیر غلظت رنگ، غلظت فلز، pH، طول ستون و تعداد چرخه های شویش به ترتیب برابر با mg l-1 07/12، mg l-1 97/12، 18/8، cm 97/12 و 2 بار شویش به دست آمده است. نتیجه های حذف رنگزای BO2 و نیکل (II) در سامانه شویش پیوسته با نانورس مونتموریلونیت اصلاح شده نشان داد که این روش می تواند برای جذب آلاینده ها از محلول های آبی کارآمد باشد. پرونده مقاله -
دسترسی آزاد مقاله
11 - تهیه و بررسی ریزساختار نانوچندسازه زیستتخریبپذیر پایه پلیلاکتیک اسید/ لاستیک اکریلونیتریل بوتادیان/ نانورس: اثرمقدار اکریلونیتریل
مهشید معروفخانی علی اصغر کتبابدر این پژوهش، نانوچندسازههای پایه پلیلاکتیک اسید (PLA)، لاستیک اکریلونیتریل بوتادیان (NBR) و 4 % وزنی نانورس به روش اختلاط مذاب در دستگاه مخلوطکن داخلی برای نخستین بار تهیه شدند. ریزساختار نمونههای نانوچندسازه تهیهشده با روشهای پراش پرتو ایکس، میکروسکوپی الکترونی چکیده کاملدر این پژوهش، نانوچندسازههای پایه پلیلاکتیک اسید (PLA)، لاستیک اکریلونیتریل بوتادیان (NBR) و 4 % وزنی نانورس به روش اختلاط مذاب در دستگاه مخلوطکن داخلی برای نخستین بار تهیه شدند. ریزساختار نمونههای نانوچندسازه تهیهشده با روشهای پراش پرتو ایکس، میکروسکوپی الکترونی روبشی و عبوری و آزمونهای اندازهگیری زاویه تماس بررسی شدند. به منظور مطالعه اثر مقدار اکریلونیتریل (ACN) بر پخش و چگونگی چیدمان نانولایههای سیلیکاتی نانورس و ریزساختار آمیزه، سه نوع لاستیک نیتریل با مقدار اکریلونیتریل متفاوت، کم (19 %)، متوسط(33 %) و زیاد (51 %) موردبررسی قرار گرفتند. نتایج بهدست آمده نشان داد که در نانوچندسازه پایه NBR با درصد ACN کم، نانولایههای رس بیشتر تمایل به استقرار در بستر PLA نشان میدهند؛ درحالیکه با افزایش مقدار اکریلونیتریل نانولایههای نانورس بیشتر در سطح مشترک دو فاز PLA و NBR قرار میگیرند. اندازه قطرههای فاز لاستیکی پخششده در بستر PLA، در حضور ذرههای نانورس نسبت به آمیزه مشابه بدون نانورس، مستقل از مقدار اکریلونیتریل، کاهش یافت. اگرچه کاهش اندازه ذرهها، بهدلیل قرارگیری صفحههای نانورس در سطح مشترک دوفاز در نانوچندسازه برپایه لاستیک نیتریل با مقدار اکریلونیتریل بیشتر، محسوستر بوده است. همچنین، با بهکارگیری پراش پرتو ایکس برای نمونهها، مشاهده شد که برای نمونه بر پایه ACN زیادتر، نانورس بیشتر در سطح مشترک دو فاز پخش میشود. پرونده مقاله