• فهرست مقالات Electrocatalysis

      • دسترسی آزاد مقاله

        1 - A strategy for degradation of 2,5-dichlorophenol using its photoelectrocatalytic oxidation on the TiO2/Ti thin film electrode
        Ebrahim Zarei
        In this work, the photoelectrocatalytic (PEC) degradation of 2,5-dichlorophenol can be used for its removal from aqueous solution. To study this activity, a TiO2 thin film modified titanium sheet (TiO2/Ti) was fabricated by anodizing Ti plates using a two electrode syst چکیده کامل
        In this work, the photoelectrocatalytic (PEC) degradation of 2,5-dichlorophenol can be used for its removal from aqueous solution. To study this activity, a TiO2 thin film modified titanium sheet (TiO2/Ti) was fabricated by anodizing Ti plates using a two electrode system under the constant bias voltage of 20 V for 20 min in a solution of 0.2% (v/v) HF followed by calcination at 500 oC for 2 h. Then, the electrochemical properties of 2,5-dichlorophenol were compared on the surface of the TiO2/Ti and unmodified Ti electrodes. Consequently, the TiO2/Ti was applied for PEC degradation of 2,5-dichlorophenol. It was found that 2,5-dichlorophenol could be degraded more efficiently by this photoelectrocatalysis process than the sum of degradation obtained by photocatalytic (PC) and electrochemical (EC) oxidation so that the amount of 2,5-dichlorophenol degraded by PEC, PC and EC oxidation were equal to 51%, 39% and 5% respectively under the 0.4 V voltage in 60 min. The effect of various parameters was studied and the highest degradation percentage of 2,5-dichlorophenol was obtained at pH 6.0, the initial 2,5-dichlorophenol concentration of 7.0 mg L-1 and applied potential of 1.2 V. پرونده مقاله
      • دسترسی آزاد مقاله

        2 - Electrochemical amperometric sensing of loratadine using NiO modified paste electrode as an amplified sensor
        Neda Raeisi-Kheirabadi Alireza Nezamzadeh-Ejhieh Hamidreza Aghaei
        A modified carbon paste electrode with NiO nanoparticles showed an excellent electrocatalytic behavior towards loratadine in the voltammetric and chronoamperometric approaches. Typical plots of IC/IL vs. t1/2 were contracted, and an average rate constant of 185.5 &plusm چکیده کامل
        A modified carbon paste electrode with NiO nanoparticles showed an excellent electrocatalytic behavior towards loratadine in the voltammetric and chronoamperometric approaches. Typical plots of IC/IL vs. t1/2 were contracted, and an average rate constant of 185.5 ± 2.2 M−1 s−1 was obtained from the slope of the curve. The geometric surface area of the electrode was 0.0314 cm2, and an average D-value of (1.11×10−3 ± 1.16×10−4) m2 s−1 was obtained for the diffusion of loratadine (Lor) towards the electrode surface. When the effective surface area (0.245 cm2) was used in calculations, an average D-value of (1.83×10−5 ± 1.96×10−6) cm2 s−1 was obtained. ∆I response is the peak current difference of the electrode at a fixed time when Lor analyte was added, and it is in proportion to the loratadine concentration in the range of 20-1000 nM. The limit of detection (LOD) and the limit of quantification (LOQ) of the method were 1.4 and 4.7 nM Lor when the 3Sb/m and 10Sb/m criteria were used, respectively. پرونده مقاله
      • دسترسی آزاد مقاله

        3 - تهیه چندسازه نانولوله‌های کربنی/ پلاتین بلک و کاربرد آن برای الکتروکاتالیست واکنش آزادسازی هیدروژن
        ابراهیم شجاعی شهلا فتحی فرشته چکین
        در این پژوهش، ابتدا چندسازه نانولوله‌های کربنی/ پلاتین بلک با روش ساده، مؤثر و ارزان تهیه شد. نمونه تهیه شده با روش‌های میکروسکوپی الکترونی عبوری (TEM) و پراش انرژی پرتو ایکس (EDX) مورد بررسی قرار گرفت. تصاویر TEM نشان داد که نانوذره‌های پلاتین به‌صورت دانه‌های تسبیح رو چکیده کامل
        در این پژوهش، ابتدا چندسازه نانولوله‌های کربنی/ پلاتین بلک با روش ساده، مؤثر و ارزان تهیه شد. نمونه تهیه شده با روش‌های میکروسکوپی الکترونی عبوری (TEM) و پراش انرژی پرتو ایکس (EDX) مورد بررسی قرار گرفت. تصاویر TEM نشان داد که نانوذره‌های پلاتین به‌صورت دانه‌های تسبیح روی دیواره خارجی نانولوله‌های کربنی تثبیت شده و وجود عنصر پلاتین (Pt) در طیف EDX دلیل بر حضور Pt در چندسازه است. سپس، با ساخت الکترود خمیر کربن اصلاح شده (CPE) با این نانو چندسازه، فعالیت کاتالیستی نانو چندسازه تهیه شده در محیط اسیدی به‌وسیله روش‌های الکتروشیمی از قبیل ولتامتری روبش خطی در واکنش آزادسازی هیدروژن مورد بررسی قرار گرفت. نتایج ولتامتری روبش خطی نشان داد که الکترود CPE اصلاح شده با Pt-CNT نسبت به الکترود CPE، با چگالی جریان بالاتر و پتانسیل کم منفی‌تر در واکنش آزادسازی هیدروژن ظاهر می‌شود. اثر عامل‌های متفاوت مانند نوع و غلظت الکترولیت و نسبت پلاتین بلک به نانولوله‌های کربنی در الکتروکاتالیست واکنش آزادسازی هیدروژن مورد بررسی قرار گرفت. نتایج نشان داد که سولفوریک اسید M 1/0 و نسبت 2:5 از پلاتین بلک به نانولوله‌های کربنی به‌عنوان شرایط بهینه در واکنش آزادسازی هیدروژن است. تثبیت چنین نانو چندسازه‌ای روی الکترود، موجب پتانسیل شروع فرایند آزادسازی هیدروژن حدود V2/0- و کمترین شیب تافل V-1 dec-14 شد. ضریب انتقال الکترون و چگالی مبادله جریان برای Pt-CNT/CPE با استفاده از شیب نمودار تافل به ترتیب حدود 3/1 وmA cm-2 12/0 برای واکنش آزادسازی هیدروژن به‌دست آمده است. پرونده مقاله
      • دسترسی آزاد مقاله

        4 - Electropolymerization of 4-aminobenzoic acid containing nano-Au deposited on carbon paste electrode for determination of acetaminophen
        Yaping Ding Ying Zhang Liqiang Luo Xiao Liu
        The conducting polymer films have been widely applied in the field of electrochemistry owing to their goodstability, permselectivity, unique physical and chemical properties. A novel nano-Au/poly (4-aminobenzoicacid) (PABA) film modified carbon paste electrode was fabri چکیده کامل
        The conducting polymer films have been widely applied in the field of electrochemistry owing to their goodstability, permselectivity, unique physical and chemical properties. A novel nano-Au/poly (4-aminobenzoicacid) (PABA) film modified carbon paste electrode was fabricated for sensitive detection of acetaminophenin this paper. The PABA film and nano-Au/PABA film were characterized by scanning electron microscope.The nano-Au/PABA film exhibited obviously catalytic performance to the determination of acetaminophenwith a high sensitivity and a wide linear range. Under optimum conditions (pH, the concentration of 4-aminobenzoic acid, electro-polymerization cycles), linearity between the oxidation peak current and theacetaminophen concentration was obtained in the range of 1.0 × 10–7 – 8.0 × 10–5 mol L-1 with a detectionlimit of 8.0 × 10–8 mol L-1 (S/N = 3). In addition, the nano-Au/PABA film modified electrode wassuccessfully employed to determine the acetaminophen in commercial drugs, and this work has shed somedoubt on the redox mechanism of acetaminophen at the sensor. پرونده مقاله