A

  • Afsari.Ahmad Investigation of Parameters Affecting Surface Integrity and Material Removal during Electrical Discharge Machining of HARDOX-400 Steel [ Vol.9, Issue 2 - Spring Year 2020]
  • Afsari.Ahmad Predicting the Influence of Electrical Discharge Machining (EDM) Parameters on the Finished Work Surface in CK45 Steel [ Vol.9, Issue 1 - Winter Year 2020]
  • Afsari.Ahmad Effect of Coating Process Parameters on Corrosion Behavior of Ti-6Al-4V [ Vol.9, Issue 1 - Winter Year 2020]
  • Afsari.Ahmad Imperialist Competitive Algorithm (ICA) Approach for Optimization of the Surface Grinding Process [ Vol.9, Issue 1 - Winter Year 2020]
  • Afsari.Ahmad Study the Percentage of Carbon and Ferrite in Layers of Steel (SA-516) by Strip Cladding with E316L [ Vol.9, Issue 3 - Summer Year 2020]
  • Afsari.Ahmad Numerical Study of Effective Parameters in the Deep Drawing Process of a Cylindrical Cup and Comparison with Experimental Results [ Vol.9, Issue 2 - Spring Year 2020]
  • Afsari.Ahmad A New Geometry Modification Algorithm for Blank Shape Optimization in the Deep Drawing Process [ Vol.9, Issue 4 - Autumn Year 2020]
  • Afsari.Ahmad Evaluation of Optimal Conditions, Microstructure, and Mechanical Properties of Aluminum to Copper Joints Welded by FSW [ Vol.9, Issue 4 - Autumn Year 2020]
  • Akbari.Javad Numerical Simulation of Homogeneous, Two and Three Lattice Layers Scaffolds with Constant Density [ Vol.9, Issue 2 - Spring Year 2020]

B

  • Bakhtiary Dastgerdi.nafiseh Designing an Improved Stochastic Planning Model for Supply Chain Considering Maintenance and Operations (MRO) in Rahiab Sanat Sepahan Engineering Technical Company [ Vol.9, Issue 3 - Summer Year 2020]
  • Barootiha.Ali Free Vibration Analysis of Sandwich Beams with FG Face Sheets Based on the High Order Sandwich Beam Theory [ Vol.9, Issue 2 - Spring Year 2020]
  • Basiri Paknafs.Zahra The Milling of Metalsthrough Adaptive Neuro-FuzzyInference System (ANFIS) for non-touch Measuring of the Temperature to Reduce Coolant [ Vol.9, Issue 2 - Spring Year 2020]
  • biniyazan.Farid An Investigation on the Microstructure and Impression Creep Behavior of the Magnesium Alloys [ Vol.9, Issue 1 - Winter Year 2020]

D

  • Davoodi.Sayyed Mohammad Reza Designing an Improved Stochastic Planning Model for Supply Chain Considering Maintenance and Operations (MRO) in Rahiab Sanat Sepahan Engineering Technical Company [ Vol.9, Issue 3 - Summer Year 2020]
  • Dehghanpour.Sajjad Free Vibration Analysis of Sandwich Beams with FG Face Sheets Based on the High Order Sandwich Beam Theory [ Vol.9, Issue 2 - Spring Year 2020]

E

  • esmaili.ahmadreza Path Planning and Control of an Industrial Robot Used for Opening Tap Hole of an Electric Arc Furnace [ Vol.9, Issue 4 - Autumn Year 2020]
  • Etemadi Haghighi.Shahram Design and Fabrication of a Longitudinal Vibration Transmitter for Ultrasonic-Vibration Assisted Milling [ Vol.9, Issue 4 - Autumn Year 2020]

F

  • Fazel.Dara Study the Percentage of Carbon and Ferrite in Layers of Steel (SA-516) by Strip Cladding with E316L [ Vol.9, Issue 3 - Summer Year 2020]

G

  • Ghani.M. An Investigation on the Effect of Acidithiobacillus Ferrooxidans Bacteria on Biomachining of Titanium Alloy and Copper [ Vol.9, Issue 1 - Winter Year 2020]
  • Gharehchahi.Hamidreza Numerical Study of Effective Parameters in the Deep Drawing Process of a Cylindrical Cup and Comparison with Experimental Results [ Vol.9, Issue 2 - Spring Year 2020]
  • Gharehchahi.Hamidreza A New Geometry Modification Algorithm for Blank Shape Optimization in the Deep Drawing Process [ Vol.9, Issue 4 - Autumn Year 2020]

H

  • Haghpanahi.Mohammad Numerical Simulation of Homogeneous, Two and Three Lattice Layers Scaffolds with Constant Density [ Vol.9, Issue 2 - Spring Year 2020]
  • Hashemzadeh.Majid The Effect of Power and Maximum Cutting Speed on the Material Removal Rate and Cutting Volume Efficiency in CO2 Laser Cutting of Polycarbonate Sheets [ Vol.9, Issue 1 - Winter Year 2020]
  • Hashemzadeh.Majid The Effect of Power, Maximum Cutting Speed and Specific Point Energy on the Material Removal Rate and Cutting Volume Efficiency in CO2 Laser Cutting of Polyamide Sheets [ Vol.9, Issue 3 - Summer Year 2020]
  • Hassanzadeh Nemati.Nahid Effect of Electrical Potential on the Morphology of Polyvinyl Alcohol/ Sodium Alginate Electrospun Nanofibers, Containing Herbal Extracts of Calendula Officinalis for Using in Biomedical Applications [ Vol.9, Issue 2 - Spring Year 2020]
  • Heidari.Shahin Imperialist Competitive Algorithm (ICA) Approach for Optimization of the Surface Grinding Process [ Vol.9, Issue 1 - Winter Year 2020]
  • Heidari.Shahin Evaluation of Optimal Conditions, Microstructure, and Mechanical Properties of Aluminum to Copper Joints Welded by FSW [ Vol.9, Issue 4 - Autumn Year 2020]
  • hortamani.amir Designing an Improved Stochastic Planning Model for Supply Chain Considering Maintenance and Operations (MRO) in Rahiab Sanat Sepahan Engineering Technical Company [ Vol.9, Issue 3 - Summer Year 2020]

J

  • jafari.esmael The Recommend of Filler Metal to Increasing the Corrosion Resistance of Gas Pipeline [ Vol.9, Issue 3 - Summer Year 2020]
  • Jafari.Jaleel Evaluation of Optimal Conditions, Microstructure, and Mechanical Properties of Aluminum to Copper Joints Welded by FSW [ Vol.9, Issue 4 - Autumn Year 2020]
  • Jalali Asbforoshani.Hossein Design and Fabrication of a Longitudinal Vibration Transmitter for Ultrasonic-Vibration Assisted Milling [ Vol.9, Issue 4 - Autumn Year 2020]

K

  • Karimi.Jafar Imperialist Competitive Algorithm (ICA) Approach for Optimization of the Surface Grinding Process [ Vol.9, Issue 1 - Winter Year 2020]
  • Karimi.Jafar Study the Percentage of Carbon and Ferrite in Layers of Steel (SA-516) by Strip Cladding with E316L [ Vol.9, Issue 3 - Summer Year 2020]
  • Kashisaz.Sara The Milling of Metalsthrough Adaptive Neuro-FuzzyInference System (ANFIS) for non-touch Measuring of the Temperature to Reduce Coolant [ Vol.9, Issue 2 - Spring Year 2020]
  • Kazemzadeh-Parsi.Mohammad Javad Numerical Study of Effective Parameters in the Deep Drawing Process of a Cylindrical Cup and Comparison with Experimental Results [ Vol.9, Issue 2 - Spring Year 2020]
  • Kazemzadeh-Parsi.Mohammad Javad A New Geometry Modification Algorithm for Blank Shape Optimization in the Deep Drawing Process [ Vol.9, Issue 4 - Autumn Year 2020]
  • Kermani.Ehsan An Investigation on the Microstructure and Impression Creep Behavior of the Magnesium Alloys [ Vol.9, Issue 1 - Winter Year 2020]
  • Keshvari.Hamid Effect of Electrical Potential on the Morphology of Polyvinyl Alcohol/ Sodium Alginate Electrospun Nanofibers, Containing Herbal Extracts of Calendula Officinalis for Using in Biomedical Applications [ Vol.9, Issue 2 - Spring Year 2020]
  • khanaki.Hamid Numerical Simulation of Homogeneous, Two and Three Lattice Layers Scaffolds with Constant Density [ Vol.9, Issue 2 - Spring Year 2020]
  • Khorasani.Mohammad T. Effect of Electrical Potential on the Morphology of Polyvinyl Alcohol/ Sodium Alginate Electrospun Nanofibers, Containing Herbal Extracts of Calendula Officinalis for Using in Biomedical Applications [ Vol.9, Issue 2 - Spring Year 2020]
  • Khosravifard.Ali Investigation of Parameters Affecting Surface Integrity and Material Removal during Electrical Discharge Machining of HARDOX-400 Steel [ Vol.9, Issue 2 - Spring Year 2020]
  • Kirshkov.Pavel An Investigation on the Application of CNT-Aluminum Nanocomposite in Mechanical Alloying [ Vol.9, Issue 4 - Autumn Year 2020]

L

  • Liakov.Jasmin An Investigation on the Application of CNT-Aluminum Nanocomposite in Mechanical Alloying [ Vol.9, Issue 4 - Autumn Year 2020]

M

  • Mahammadi.Mehdi The Effect of Power and Maximum Cutting Speed on the Material Removal Rate and Cutting Volume Efficiency in CO2 Laser Cutting of Polycarbonate Sheets [ Vol.9, Issue 1 - Winter Year 2020]
  • Majidi.Mohammad Hossein Effect of Coating Process Parameters on Corrosion Behavior of Ti-6Al-4V [ Vol.9, Issue 1 - Winter Year 2020]
  • Mansouri.Ehsan A Mixed Integer Nonlinear Programming for Facility Layout Problem with Maintenance Constraints [ Vol.9, Issue 4 - Autumn Year 2020]
  • Mehrabi.Vahid Study the Percentage of Carbon and Ferrite in Layers of Steel (SA-516) by Strip Cladding with E316L [ Vol.9, Issue 3 - Summer Year 2020]
  • Mohammadi.Mehrdad Numerical Study of Effective Parameters in the Deep Drawing Process of a Cylindrical Cup and Comparison with Experimental Results [ Vol.9, Issue 2 - Spring Year 2020]
  • Mohammadi.Mehrdad A New Geometry Modification Algorithm for Blank Shape Optimization in the Deep Drawing Process [ Vol.9, Issue 4 - Autumn Year 2020]
  • Morady Gohareh.Mehdy A Mixed Integer Nonlinear Programming for Facility Layout Problem with Maintenance Constraints [ Vol.9, Issue 4 - Autumn Year 2020]
  • Motevasseli.Hesam Investigation of Parameters Affecting Surface Integrity and Material Removal during Electrical Discharge Machining of HARDOX-400 Steel [ Vol.9, Issue 2 - Spring Year 2020]

N

  • Nikkhoo.Mohammad Numerical Simulation of Homogeneous, Two and Three Lattice Layers Scaffolds with Constant Density [ Vol.9, Issue 2 - Spring Year 2020]

P

  • Poorshaban.Reza The Effect of Power, Maximum Cutting Speed and Specific Point Energy on the Material Removal Rate and Cutting Volume Efficiency in CO2 Laser Cutting of Polyamide Sheets [ Vol.9, Issue 3 - Summer Year 2020]

R

  • Rabiezadeh.Amin Effect of Coating Process Parameters on Corrosion Behavior of Ti-6Al-4V [ Vol.9, Issue 1 - Winter Year 2020]
  • Rahmani.Mohsen Free Vibration Analysis of Sandwich Beams with FG Face Sheets Based on the High Order Sandwich Beam Theory [ Vol.9, Issue 2 - Spring Year 2020]
  • Rahmati.Sadegh Numerical Simulation of Homogeneous, Two and Three Lattice Layers Scaffolds with Constant Density [ Vol.9, Issue 2 - Spring Year 2020]
  • Ramezani.Mohammad Imperialist Competitive Algorithm (ICA) Approach for Optimization of the Surface Grinding Process [ Vol.9, Issue 1 - Winter Year 2020]
  • rezaee.behzad An Investigation on the Microstructure and Impression Creep Behavior of the Magnesium Alloys [ Vol.9, Issue 1 - Winter Year 2020]
  • Riahi.Ahmad The Milling of Metalsthrough Adaptive Neuro-FuzzyInference System (ANFIS) for non-touch Measuring of the Temperature to Reduce Coolant [ Vol.9, Issue 2 - Spring Year 2020]

S

  • Saadat.Mohammad Path Planning and Control of an Industrial Robot Used for Opening Tap Hole of an Electric Arc Furnace [ Vol.9, Issue 4 - Autumn Year 2020]
  • Safari.Aref A Novel Transformation Watershed Image Segmentation Model in Digital Elevation Maps Processing [ Vol.9, Issue 3 - Summer Year 2020]
  • Salari.Mahdi Dissimilar Friction Stir Welding between Magnesium and Aluminum Alloys [ Vol.9, Issue 3 - Summer Year 2020]
  • Shirani Bidabadi.E. An Investigation on the Effect of Acidithiobacillus Ferrooxidans Bacteria on Biomachining of Titanium Alloy and Copper [ Vol.9, Issue 1 - Winter Year 2020]
  • Soleimanimehr.Hamid An Investigation on the Effect of Acidithiobacillus Ferrooxidans Bacteria on Biomachining of Titanium Alloy and Copper [ Vol.9, Issue 1 - Winter Year 2020]
  • Soleimanimehr.Hamid An Investigation on the Microstructure and Impression Creep Behavior of the Magnesium Alloys [ Vol.9, Issue 1 - Winter Year 2020]
  • Soleimanimehr.Hamid Design and Fabrication of a Longitudinal Vibration Transmitter for Ultrasonic-Vibration Assisted Milling [ Vol.9, Issue 4 - Autumn Year 2020]

T

  • Tahami.Seyed Rasoul Effect of Electrical Potential on the Morphology of Polyvinyl Alcohol/ Sodium Alginate Electrospun Nanofibers, Containing Herbal Extracts of Calendula Officinalis for Using in Biomedical Applications [ Vol.9, Issue 2 - Spring Year 2020]

V

  • Vasegh.Raha An Investigation on the Application of CNT-Aluminum Nanocomposite in Mechanical Alloying [ Vol.9, Issue 4 - Autumn Year 2020]