Table of Contents
Subject Areas :
1 - -
Keywords: Manufacturing and Production,
Abstract :
An Investigation of the Manufacturing Process, Structure, and Performance of the New Micro and Nano Thermoplastic-based Composites Prepared with Zeolite Filler….………………………………………………….…5Ahmed HebatalrahmanFailure Evaluation of Cupronickel Alloy Used in the Condenser of the Desalination Unit…..……………………...21Javad Hashemi; Amin RabiezadehAssessment of Third-order Shear Deformation Graphene Nanoplate Response under Static Loading Using Modified Couple Stress Theory……………………………………….…………..…………………….………………41Majid Eskandari Shahraki; Mahmoud Shariati; Naser Asiaban; Ali Davar; Mohsen Heydari Beni; Jafar Eskandari JamExperimental Study on In-Depth Residual Stress due to 420 Stainless Steel Creep-Feed Grinding Using the Deflection-Electro Polishing Technique………………………………………………………………………..…..…..59Vahid Jafarpour; Rasoul MoharramiFabrication of Various Dimple Shapes and Arrays on a Hypereutectic Al-Si Alloy Using a Turning Process……..…………………………………………………………………………………………….………………75Jaharah A. Ghani; Faarih Farhan Mohd Nasir Mohd Nasir; Mohd Nor Azam bin Mohd Dali; Wan Fathul Hakim W. Zamri; Mohd Shahir Kasim; Che Hassan Che HaronDesign, Fabrication, and Assessment of a Hydrodynamic Reactor for Biodiesel Production………………………...…………………………………………………………………….…………….....83Kimia Taki; Bahram Hosseinzadeh Samani
An Investigation of the Manufacturing Process, Structure, and Performance of the New Micro and Nano Thermoplastic-based Composites Prepared with Zeolite Filler….………………………………………………….…5
Ahmed Hebatalrahman
Failure Evaluation of Cupronickel Alloy Used in the Condenser of the Desalination Unit…..……………………...21
Javad Hashemi; Amin Rabiezadeh
Assessment of Third-order Shear Deformation Graphene Nanoplate Response under Static Loading Using Modified Couple Stress Theory……………………………………….…………..…………………….………………41
Majid Eskandari Shahraki; Mahmoud Shariati; Naser Asiaban; Ali Davar; Mohsen Heydari Beni; Jafar Eskandari Jam
Experimental Study on In-Depth Residual Stress due to 420 Stainless Steel Creep-Feed Grinding Using the Deflection-Electro Polishing Technique………………………………………………………………………..…..…..59
Vahid Jafarpour; Rasoul Moharrami
Fabrication of Various Dimple Shapes and Arrays on a Hypereutectic Al-Si Alloy Using a Turning Process……..…………………………………………………………………………………………….………………75
Jaharah A. Ghani; Faarih Farhan Mohd Nasir Mohd Nasir; Mohd Nor Azam bin Mohd Dali; Wan Fathul Hakim W. Zamri; Mohd Shahir Kasim; Che Hassan Che Haron
Design, Fabrication, and Assessment of a Hydrodynamic Reactor for Biodiesel Production………………………...…………………………………………………………………….…………….....83
Kimia Taki; Bahram Hosseinzadeh Samani