A

  • Abdollahzadeh Bina.F. Finite Element Prediction on the Machining Stability of Boring Machine with Experimental Verification [ Vol.8, Issue 1 - Winter Year 2015]
  • Aboutalebi.M. R. A study on the numerical simulation of thermo-mechanical behavior of the novel functionally graded thermal barrier coating under thermal shock [ Vol.8, Issue 2 - Spring Year 2015]
  • Adibnazari.Saeed Multi layered finite element analysis of graded coatings in frictional rolling contact [ Vol.8, Issue 1 - Winter Year 2015]
  • Aghajani.Hamed Study on heat generation and distribution during friction stir welding of AA1100 aluminum alloy [ Vol.8, Issue 3 - Summer Year 2015]
  • akbarzadeh.ali Prismatic Series of Elastic Actuator: Modelling and Control by ICA and PSO-tuned Fractional Order PID [ Vol.8, Issue 4 - Autumn Year 2015]
  • Alimirzaloo.Vali Optimization of the Forging Process of a Gas Turbine Blade using the Finite Element Analysis and Response Surface Method [ Vol.8, Issue 1 - Winter Year 2015]
  • Alimirzaloo.Vali Numerical and Analytical Investigation of the Sandwich sheet Rolling Process ConsideringCoulomb Friction [ Vol.8, Issue 3 - Summer Year 2015]
  • Alizadeh Saravi.Leila Design and implementation of feedback linearization control method to determine the DLCC of 6R manipulator [ Vol.8, Issue 3 - Summer Year 2015]
  • Amini.Saeid Statistical Analysis and Optimization of Factors Affecting the Spring-back Phenomenon in UVaSPIF Process Using Response Surface Methodology [ Vol.8, Issue 1 - Winter Year 2015]
  • asadi.Parviz Experimental investigations of microstructure of Al 1100 alloys welded by friction stir welding process [ Vol.8, Issue 3 - Summer Year 2015]
  • Atashafrooz.Meysam Effects of baffle on separated convection step flow of radiating gas in a duct [ Vol.8, Issue 3 - Summer Year 2015]
  • Azizi.T Effects of Slip Boundaries on Mixed Convection of Al2O3-water Nanofluid in Microcavity [ Vol.8, Issue 2 - Spring Year 2015]

B

  • Babaei.Ali Constrained Optimization of a Commercial Aircraft Wing Using Non-dominated Sorting Genetic Algorithms (NSGA) [ Vol.8, Issue 4 - Autumn Year 2015]
  • Bakkhoshnevis.Abdolamir Experimental study of the characteristics of the wake and drag coefficient changes of a car model in unsteady flow [ Vol.8, Issue 1 - Winter Year 2015]
  • barzanooni.vahid Experimental study of the characteristics of the wake and drag coefficient changes of a car model in unsteady flow [ Vol.8, Issue 1 - Winter Year 2015]
  • Barzegar.Ramin Finite Element Prediction on the Machining Stability of Boring Machine with Experimental Verification [ Vol.8, Issue 1 - Winter Year 2015]

D

  • Dalayeli.Hossein Vibration Analysis of a Multi-disk, Bearing and Mass Unbalance Rotor Using Assumed Modes Method [ Vol.8, Issue 1 - Winter Year 2015]
  • damircheli.mehrnoosh Dynamic Analysis of AFM in Air and Liquid Environments Considering Linear and Non-linear Interaction Forces by Timoshenko Beam Model [ Vol.8, Issue 2 - Spring Year 2015]
  • damircheli.mehrnoosh Numerical Simulation of Fluid-Structure Interaction and its Application in Impact of Low-Velocity Projectiles with Water Surface [ Vol.8, Issue 2 - Spring Year 2015]
  • Darvishvand.Leila A hybrid approach based on the genetic algorithm and Monte Carlo method to optimize the 3-D radiant furnaces [ Vol.8, Issue 3 - Summer Year 2015]
  • Dashtian Gerami.N. Numerical Simulation of Fluid-Structure Interaction and its Application in Impact of Low-Velocity Projectiles with Water Surface [ Vol.8, Issue 2 - Spring Year 2015]

E

  • Ebrahimi.F Vibration Analysis of an Initially Pre-stressed Rotating Carbon Nanotube Employing Differential Transform Method [ Vol.8, Issue 4 - Autumn Year 2015]

G

  • Gangaliannasab.Abdoreza Effects of baffle on separated convection step flow of radiating gas in a duct [ Vol.8, Issue 3 - Summer Year 2015]
  • Ghannad.Mehdi A thermoelasticity solution for thick cylinders subjected to thermo-mechanical loads under various boundary conditions [ Vol.8, Issue 4 - Autumn Year 2015]
  • ghazikhani.mohsen Irreversibility Analysis and Numerical Simulation in a Finned-Tube Heat Exchanger Equipped with Block Shape Vortex Generator [ Vol.8, Issue 1 - Winter Year 2015]
  • Gholipoor.Ahad Experimental investigations of microstructure of Al 1100 alloys welded by friction stir welding process [ Vol.8, Issue 3 - Summer Year 2015]
  • Gorji-Bandpy.Mofid Numerical Simulation of the Supersonic Flow over Forward-Facing Step in Micro Couette Flow Using Direct Simulation Monte Carlo Method [ Vol.8, Issue 3 - Summer Year 2015]

H

  • habibnejad.moharam Dynamic Analysis of AFM in Air and Liquid Environments Considering Linear and Non-linear Interaction Forces by Timoshenko Beam Model [ Vol.8, Issue 2 - Spring Year 2015]
  • habibnejad.moharam Design and implementation of feedback linearization control method to determine the DLCC of 6R manipulator [ Vol.8, Issue 3 - Summer Year 2015]
  • habibnejad.moharam Modeling and Optimal Control of a Sport Utility Cable Suspended Robot [ Vol.8, Issue 3 - Summer Year 2015]
  • Hadavi.Seyed Mohammad Mehdi A study on the numerical simulation of thermo-mechanical behavior of the novel functionally graded thermal barrier coating under thermal shock [ Vol.8, Issue 2 - Spring Year 2015]
  • Haddadpour.Hassan Modal and Aeroelastic Analysis of A High-Aspect-Ratio Wing with Large Deflection Capability [ Vol.8, Issue 1 - Winter Year 2015]
  • Haghani.Ahmad Predicting Strip Tearing in Cold Rolling Tandem Mill using Neural Network [ Vol.8, Issue 1 - Winter Year 2015]
  • Hamedi.Mohsen Study of the Resonant Frequency of Unimorph Triangular V-shaped Piezoelectric Cantilever Energy Harvester [ Vol.8, Issue 4 - Autumn Year 2015]
  • Hatami.Amin Scheduling of Unrelated Parallel Machines using Two Multi Objective Genetic Algorithms with Sequence-Dependent Setup Times and Precedent Constraints [ Vol.8, Issue 4 - Autumn Year 2015]
  • Heidari.Mohammad Prediction of Residual Stresses by Radial Basis Neural Network in HSLA-65 Steel Weldments [ Vol.8, Issue 2 - Spring Year 2015]
  • heydari vini.mohammad A New Rolling Pressure Model for An Actual Reversing Cold Rolling Strip Mill [ Vol.8, Issue 2 - Spring Year 2015]
  • Hoshiar.Ali Developing a control strategy for AFM nano- micro manipulation [ Vol.8, Issue 2 - Spring Year 2015]
  • Hosseingholi pourasl.hamed Finite Element Prediction on the Machining Stability of Boring Machine with Experimental Verification [ Vol.8, Issue 1 - Winter Year 2015]
  • Hosseini.Rouhollah Study of the Resonant Frequency of Unimorph Triangular V-shaped Piezoelectric Cantilever Energy Harvester [ Vol.8, Issue 4 - Autumn Year 2015]

J

  • Jahani.Mahsa Numerical Simulation of the Supersonic Flow over Forward-Facing Step in Micro Couette Flow Using Direct Simulation Monte Carlo Method [ Vol.8, Issue 3 - Summer Year 2015]
  • Jahanshahi.Hadi Design of Optimal PID, Fuzzy and New Fuzzy-PID Controller for CANSAT Carrier System Thrust Vector [ Vol.8, Issue 2 - Spring Year 2015]
  • Jahedi.Reza Multi layered finite element analysis of graded coatings in frictional rolling contact [ Vol.8, Issue 1 - Winter Year 2015]

K

  • Kamkari.Babak A hybrid approach based on the genetic algorithm and Monte Carlo method to optimize the 3-D radiant furnaces [ Vol.8, Issue 3 - Summer Year 2015]
  • Khalilorahmani.Omid An Investigation on Effective Parameters in Cylindrical Surface Finishing of Hot Resistance Stainless Steel AISI 321 by Magnetic Abrasive Finishing (MAF) Method [ Vol.8, Issue 4 - Autumn Year 2015]
  • khazraiyan.najmeh Numerical Simulation of Fluid-Structure Interaction and its Application in Impact of Low-Velocity Projectiles with Water Surface [ Vol.8, Issue 2 - Spring Year 2015]
  • Khoogar.A. R. Predicting Strip Tearing in Cold Rolling Tandem Mill using Neural Network [ Vol.8, Issue 1 - Winter Year 2015]
  • Kohi.Reza Modal and Aeroelastic Analysis of A High-Aspect-Ratio Wing with Large Deflection Capability [ Vol.8, Issue 1 - Winter Year 2015]
  • kosari.Amirreza Design of Optimal PID, Fuzzy and New Fuzzy-PID Controller for CANSAT Carrier System Thrust Vector [ Vol.8, Issue 2 - Spring Year 2015]
  • Kumarci.Farshad Predicting Strip Tearing in Cold Rolling Tandem Mill using Neural Network [ Vol.8, Issue 1 - Winter Year 2015]

L

  • Lohmousavi.Mohsen Comparison of Tube Formability in Electromagnetic Forming and High speed hydroforming [ Vol.8, Issue 3 - Summer Year 2015]
  • Lohmousavi.Mohsen Finite Element Simulation and Experimental Study on Energy Absorption of 3D Woven Glass Fiber Composite Sandwich Panels [ Vol.8, Issue 4 - Autumn Year 2015]

M

  • Mahboobkhah.Mehran Finite Element Prediction on the Machining Stability of Boring Machine with Experimental Verification [ Vol.8, Issue 1 - Winter Year 2015]
  • Mahdavinejad.Ramezanali Statistical Analysis and Optimization of Factors Affecting the Spring-back Phenomenon in UVaSPIF Process Using Response Surface Methodology [ Vol.8, Issue 1 - Winter Year 2015]
  • Maleki Moghadam Abyaneh.P. Dynamic Analysis of AFM in Air and Liquid Environments Considering Linear and Non-linear Interaction Forces by Timoshenko Beam Model [ Vol.8, Issue 2 - Spring Year 2015]
  • Mamouri.AmirReza An investigation of Reynolds number effect on the aerodynamics of bluff body with sharp edges [ Vol.8, Issue 3 - Summer Year 2015]
  • Manafi.B. Dynamic Analysis of AFM in Air and Liquid Environments Considering Linear and Non-linear Interaction Forces by Timoshenko Beam Model [ Vol.8, Issue 2 - Spring Year 2015]
  • matin.reza Finite Element Prediction on the Machining Stability of Boring Machine with Experimental Verification [ Vol.8, Issue 1 - Winter Year 2015]
  • Mohammadian.Ali Irreversibility Analysis and Numerical Simulation in a Finned-Tube Heat Exchanger Equipped with Block Shape Vortex Generator [ Vol.8, Issue 1 - Winter Year 2015]
  • morovat.foozieh Analytical Solution for Buckling of Composite Sandwich Truncated Conical Shells subject to Combined External Pressure and Axial Compression Load [ Vol.8, Issue 4 - Autumn Year 2015]
  • mousavi.mohammad hossein Comparison of Tube Formability in Electromagnetic Forming and High speed hydroforming [ Vol.8, Issue 3 - Summer Year 2015]
  • Mousavi.S.H Effects of Slip Boundaries on Mixed Convection of Al2O3-water Nanofluid in Microcavity [ Vol.8, Issue 2 - Spring Year 2015]

N

  • Naderi.Reihaneh Scheduling of Unrelated Parallel Machines using Two Multi Objective Genetic Algorithms with Sequence-Dependent Setup Times and Precedent Constraints [ Vol.8, Issue 4 - Autumn Year 2015]
  • NayebPashaee.Nasim A study on the numerical simulation of thermo-mechanical behavior of the novel functionally graded thermal barrier coating under thermal shock [ Vol.8, Issue 2 - Spring Year 2015]
  • Nazemi.Hamid An Investigation on Hydrogen Embrittlement of the Cr-Si Spring Steel Using Slow Strain Rate Test and Weibull Model [ Vol.8, Issue 4 - Autumn Year 2015]
  • Niroumand.Behzad Surface Characteristics Improvement of AZ31B Magnesium by Surface Compositing with Carbon Nano-tubes through Friction Stir Processing [ Vol.8, Issue 1 - Winter Year 2015]
  • Noorifar.Emad Irreversibility Analysis and Numerical Simulation in a Finned-Tube Heat Exchanger Equipped with Block Shape Vortex Generator [ Vol.8, Issue 1 - Winter Year 2015]
  • Norouzi Ghazbi.Somayeh Prismatic Series of Elastic Actuator: Modelling and Control by ICA and PSO-tuned Fractional Order PID [ Vol.8, Issue 4 - Autumn Year 2015]
  • Norouzi.Rouhollah Vibration Analysis of a Multi-disk, Bearing and Mass Unbalance Rotor Using Assumed Modes Method [ Vol.8, Issue 1 - Winter Year 2015]

P

  • Parhizkar Yaghoobi.Mohammad A thermoelasticity solution for thick cylinders subjected to thermo-mechanical loads under various boundary conditions [ Vol.8, Issue 4 - Autumn Year 2015]

R

  • RaeisiFard.Hamed Developing a control strategy for AFM nano- micro manipulation [ Vol.8, Issue 2 - Spring Year 2015]
  • Rafee Nekoo.Saeed Design and implementation of feedback linearization control method to determine the DLCC of 6R manipulator [ Vol.8, Issue 3 - Summer Year 2015]
  • rafeeyan.Mansour Vibration Analysis of a Multi-disk, Bearing and Mass Unbalance Rotor Using Assumed Modes Method [ Vol.8, Issue 1 - Winter Year 2015]
  • Rahmati.A.R. Effects of Slip Boundaries on Mixed Convection of Al2O3-water Nanofluid in Microcavity [ Vol.8, Issue 2 - Spring Year 2015]
  • Rahmati.Sadegh Design and Control of a 3 DOF Hand Skeleton for Rehabilitation after Stroke [ Vol.8, Issue 2 - Spring Year 2015]
  • Razavi.Aliakbar Design of Optimal PID, Fuzzy and New Fuzzy-PID Controller for CANSAT Carrier System Thrust Vector [ Vol.8, Issue 2 - Spring Year 2015]
  • Rorani.Mahdi Design and Control of a 3 DOF Hand Skeleton for Rehabilitation after Stroke [ Vol.8, Issue 2 - Spring Year 2015]

S

  • Sadat Behineh.E. Effects of baffle on separated convection step flow of radiating gas in a duct [ Vol.8, Issue 3 - Summer Year 2015]
  • Safaei.Sahar Scheduling of Unrelated Parallel Machines using Two Multi Objective Genetic Algorithms with Sequence-Dependent Setup Times and Precedent Constraints [ Vol.8, Issue 4 - Autumn Year 2015]
  • Safarian.I. Designing an Artificial Neural Network Based Model for Online Prediction of Tool Life in Turning [ Vol.8, Issue 2 - Spring Year 2015]
  • salimi.aydin Designing an Artificial Neural Network Based Model for Online Prediction of Tool Life in Turning [ Vol.8, Issue 2 - Spring Year 2015]
  • Sarpoolaky.Hosein A study on the numerical simulation of thermo-mechanical behavior of the novel functionally graded thermal barrier coating under thermal shock [ Vol.8, Issue 2 - Spring Year 2015]
  • Sattari.Sajjad Numerical Simulation of the Supersonic Flow over Forward-Facing Step in Micro Couette Flow Using Direct Simulation Monte Carlo Method [ Vol.8, Issue 3 - Summer Year 2015]
  • Setayandeh.Mohammad Constrained Optimization of a Commercial Aircraft Wing Using Non-dominated Sorting Genetic Algorithms (NSGA) [ Vol.8, Issue 4 - Autumn Year 2015]
  • Seyedein.S. H. A study on the numerical simulation of thermo-mechanical behavior of the novel functionally graded thermal barrier coating under thermal shock [ Vol.8, Issue 2 - Spring Year 2015]
  • Shaghaghi.Gholam Reza Vibration Analysis of an Initially Pre-stressed Rotating Carbon Nanotube Employing Differential Transform Method [ Vol.8, Issue 4 - Autumn Year 2015]
  • Shahverdi.H Modal and Aeroelastic Analysis of A High-Aspect-Ratio Wing with Large Deflection Capability [ Vol.8, Issue 1 - Winter Year 2015]
  • Shamanian.Morteza Surface Characteristics Improvement of AZ31B Magnesium by Surface Compositing with Carbon Nano-tubes through Friction Stir Processing [ Vol.8, Issue 1 - Winter Year 2015]
  • shirani.amir Finite Element Simulation and Experimental Study on Energy Absorption of 3D Woven Glass Fiber Composite Sandwich Panels [ Vol.8, Issue 4 - Autumn Year 2015]
  • Sohrabi.Amir Scheduling of Unrelated Parallel Machines using Two Multi Objective Genetic Algorithms with Sequence-Dependent Setup Times and Precedent Constraints [ Vol.8, Issue 4 - Autumn Year 2015]
  • soltani.maad Surface Characteristics Improvement of AZ31B Magnesium by Surface Compositing with Carbon Nano-tubes through Friction Stir Processing [ Vol.8, Issue 1 - Winter Year 2015]

T

  • Tourajizadeh.Hami Modeling and Optimal Control of a Sport Utility Cable Suspended Robot [ Vol.8, Issue 3 - Summer Year 2015]

V

  • Vafaeenezhad.H. N. A study on the numerical simulation of thermo-mechanical behavior of the novel functionally graded thermal barrier coating under thermal shock [ Vol.8, Issue 2 - Spring Year 2015]

Y

  • Yousefzadeh.Mahdi Modeling and Optimal Control of a Sport Utility Cable Suspended Robot [ Vol.8, Issue 3 - Summer Year 2015]

Z

  • zakeri.vahiid Finite Element Prediction on the Machining Stability of Boring Machine with Experimental Verification [ Vol.8, Issue 1 - Winter Year 2015]
  • zakeri.vahiid Experimental investigations of microstructure of Al 1100 alloys welded by friction stir welding process [ Vol.8, Issue 3 - Summer Year 2015]
  • Zarareh.Amin Effects of Slip Boundaries on Mixed Convection of Al2O3-water Nanofluid in Microcavity [ Vol.8, Issue 2 - Spring Year 2015]