In this paper, the multi-objective optimum design of shell and tube heat exchangers is investigated. A thermal modelling of an industrial shell and tube heat exchanger is performed using an -NTU method for estimating the shell side heat transfer coefficient and pressure drop. The efficiency and total cost (includes the capital investment for the equipment and operating cost) are two important parameters in the design of heat exchangers. The fixed parameters and the ranges of the design variables are obtained from a shell and tube recovery heat exchanger in Barez tire production factory located in Kerman city, Iran. The Imperialist Competitive Algorithm (ICA) is used to find the optimal design parameters to achieve the maximum thermal efficiency and minimum consumption cost as the objective functions. The tube inside and outside diameters, tube length and the number of tubes are considered as four design variables. Furthermore, the effects of changing the values ​​of the design variable on the objective functions are independently investigated. At the end, the obtained Pareto front and the related design variables and their corresponding objective functions are presented. پرونده مقاله

In this paper, the multi-objective optimum design of plate fin heat exchangers is investigated. To this end, the efficiency and cost as two important factors for the design of heat exchangers are regarded as the objective functions. Fin pitch, fin height, fin offset length, cold stream flow length, no-flow length and hot stream flow length are considered as six design parameters. The ε-NTU method is applied to estimate the heat exchanger pressure drop and its effectiveness. A case study related to a gas furnace in Barez tire group located in the northwest of Kerman, Iran is considered for the constant parameters. The Imperialist Competitive Algorithm (ICA) is used to find the optimal design parameters to achieve the maximum thermal efficiency and minimum consumption cost. The method of the weighting coefficients is applied to change the considered multi-objective optimization problem as a single objective one. Furthermore, the effects of variations of the design parameters on the objective functions are independently investigated, and the related graphs are presented. پرونده مقاله