Application of empirical rock-slope engineering classifications to the stability assessment of rock slopes is considered a basic rule that is obeyed by most of the geological engineers around the world. Some of these classification methods that are applied for special design and assessment in geo-structures such as: slope stability, mining activities, excavation, road/railway cutting, etc. are effectively used for reinforcement. The Q-slope classification system which is developed to describe is continuous rock-slope conditions is used for engineering judgment regarding slope stability. This work is focused on the Assalouyeh anticline’s south side which is located in the South Pars Zone (SPZ) in southern Iran. According to the results of the study on 55slopes in the SPZ and implementation of the Q-slope system, a major part of the slopes in terms of sustainability possess critical/uncertain conditions (25 cases), 10 slopes are considered as unstable and 20slopes are classified as stable. پرونده مقاله

Nowadays for many reasons, including geological structures governing on the project site, the foundation near of the rock slope and embankment are constructed. The analysis of this type foundation, the slope effect on found is non-negligible and will be cause changes on failure system. Generally, conditions governing on slope (such as position, body masses, physical and mechanical properties, strength parameters and etc.) and the the foundation conditions (foundation type, material, spacing of the slope, the weight on the foundation, found deviation, Angularity of foundation and etc.) play an important role in the foundation stability analysis. In this study, we attempted to numerical modeling of Phase 8 Gas flare foundation of South Pars Gas Complex is located near slope by the finite difference method (FDM) using Flac2D software. The aim of this study, evaluating and analyzing the probabile failure mechanism. Finally, Gas flare stability based on the results of the modeling is controlled. پرونده مقاله

Stability analysis and calculation of safety factor of slopes especially jointed rock slopes, the most important noticeable issue for stability analysis of slopes. Numerical modeling of soil and rock slope stability analysis most widely used in engineering geology. In this study, for analyze the complex slope used geotechnical modeling. Geotechnical modeling was separated into two parts, the first intended for geometrical modeling and the second for two-dimensional mechanical modeling. This model based on the proposed algorithm developed in MATHEMATICA software. Modeling on the complex slope in the Gas Flare site has been implemented. Due to the location of the Gas Flare site in Assalouyeh anticline, slopes are in Mishan and Aghajari marl formations. Because of the STR - 01 slope complicated conditions and discontinuity system, for stability analysis have been selected. The main body of this slope is divided into two distinct parts with different mechanical properties. The STR - 01-1 Section due to the high fragmentation, discontinuity system and low spacing, in pseudo-soil conditions can be found on site. In this section, the overall structure of the body is still preserved, but the rock body is so badly crushed. For this reason, the rock mass as soil condition is considered and analysed. The STR - 01-2 section as a STR - 01-1 section is not crushed. Then for the STR -01-2 section, structural analysis under jointed rock mass condition. The proposed algorithm used for this analysis, is based on the appropriate assumptions and the ability to accurately. Finally for geotechnical model control, results of the proposed method with the results of Basic key group method and numerical modeling with distinct element method by UDEC and for pseudo-soil conditions with finite difference method by Flac/slope are calculated and compared. The results of the proposed method are in good agreement with the results of the numerical methods. پرونده مقاله

On the north-side of Phase 7 gas flare site located in South Pars Gas Complex (SPGC), Assalouyeh, Iran has a discontinuous rock slope that due to tectonic activity has been vertical mode folded. Also, the coastal climate caused to weathering of mass and occurring toppling failure in this slope. This instability causes some problems in accessing the flare site. So, this slope need to stability analysis and stabilization. In order to stability analysis of this discontinuous rock slope, utilized the distinct elements method (DEM). The modelling process of toppling failures in UDEC is divided to geometrical and mechanical modelling. The result of modelling has good agreement with the toppling failures definition and process. پرونده مقاله

Generally, one of the most problematic tunnel drilled, are water transfer tunnels. These tunnels in terms of risk such as a particularly important constructs is considered and Calculation of strength parapmeters on seismic movements of earth must be done carefully and based on designed criteria. Due to the high sensitivity of the transfer of water in underground, study of engineering geology, seismicity tunnel, tunnel safety and stability control is critical and essential. In this study, try to study of seismotectonic and seismicity of Golab 2 water transfer tunnel located at Koron plain in Isfahan province. The aim of this study was to identify the faults, structural trends and estimation of seismicity parameter using Gothenburg - Richter primary method for 150 Km area of around the tunnel entrance by moment magnitude (Mw). پرونده مقاله