The present study investigated the effect of using tools with tapered pins in Friction Stir Welding (FSW) of AA6061-T6 aluminum alloy. Two techniques named conventional FSW and Refill Friction Stir Welding (RFSW) were used for this purpose. Five tools with different tapered angles (0, 5, 10, 15, and 20 degrees) were used. To study the mechanical properties, tensile, three-point bending, and Vickers microhardness tests were performed. Macrographic and microstructural tests were also used to investigate the metallurgical properties of the welded samples. Based on the results, it was found that the key factors determining the ductility and strength of the welded specimens are the type of welding process (conventional FSW or RFSW) and the geometry of the tool pin (straight or tapered pin). Furthermore, it was found that all specimens welded by RFSW have higher tensile strength and elongation than the samples welded by conventional FSW. پرونده مقاله