Predicting the Influence of Electrical Discharge Machining (EDM) Parameters on the Finished Work Surface in CK45 Steel
محورهای موضوعی : Additive manufacturing processes
Esmaeil Jafari
1
(Department of Materials Science and Engineering, School of Engineering, Islamic Azad University, Shiraz)
Ahmad Afsari
2
(Mechanical Engineering Dept., Shiraz Branch, Islamic Azad University, Shiraz, Iran)
Sina Abedpour
3
(Mechanical Engineering Dept., Shiraz Branch, Islamic Azad University, Shiraz, Iran)
کلید واژه: CK45 Steel, Surface Roughness, Micro-crack, EDM Parameters, Forge die,
چکیده مقاله :
CK45 steel is a suitable material for the manufacturing of forging dies. This paper investigates the influence of electrical discharge machining (EDM) parameters including voltage, current, on-time and off-time on the microstructure of the machined surface of this material. The process induces thermal stresses that in turn result in the generation of widespread micro-cracks on the surface of the part subjected to spark EDM. The influence of EDM parameters on the quality of the machined surface is explored by performing an extensive experimental program. The impact of EDM parameters on the surface roughness and the intensity of micro-cracks have been evaluated quantitatively using the test results and regression analysis. Predicting the relationship between EMD parameters and the surface quality provides practical means to appropriately decide on the adjustment of process control parameters to their optimum values and hence to achieve the desired surface quality at reasonable manufacturing times and cost.
[1] Leptidis, S., Papageorgiou, D., Medrea, C. and Chicinaş, I. 2016. Failure analysis of an EDM Machined mold-printing die used for the production of truck spare parts. Engineering Failure Analysis. 61:62-68.
[2] Oskuie, A., Shahrabi, T. and Lajevardi, A. 2013. Failure of pipeline expander segments due to undesirable EDM. Engineering Failure Analysis. 28 :34-46.
[3] Murray, J., Clare, A. 2012. Repair of EDM induced surface cracks by pulsed electron beam irradiation. Journal of Materials Processing Technology. 212 (12):2642-2651.
[4] Singh, N, Routara, B and Das, D. 2018. Study of machining characteristics of Inconel 601in EDM using RSM. Materials Today: Proceedings. 5 (2):3438-3449.
[5] Lee, H-T. and Tai, T.Y. 2003. Relationship between EDM parameters and surface crack formation.Journal of Materials Processing Technology. 142 (3):676-683.
[6] McGeough, JA. 2001. Micromachining of engineering materials. CRC Press.
[7] Kumar, S.S. Uthayakumar, M. Kumaran, S.T. Varol, T. and Canakci, A. 2018. Investigating the surface integrity of aluminium based composites machined by EDM. Defence Technology. 98: 5-8.
[8] Rao, P.S., Ramji, K. and Satyanarayana, B. 2016. Effect of wire EDM conditions on generation of residual stresses in machining of aluminum 2014 T6 alloy. Alexandria Engineering Journal 55.(2):1077-1084.
[9] Arunachalam, S.R., Dorman, S.E.G., Buckley, R.T. Conrad, N.A. and Fawaz, SA. 2018. Effect of electrical discharge machining on corrosion and corrosion fatigue behavior of aluminum alloys.International Journal of Fatigue. 111:44-53.
[10] Antar, M., Hayward, P., Dunleavey, J. and Butler-Smith, P. 2018. Surface Integrity Evaluation of Modified EDM Surface Structure. Procedia CIRP. 68:308-312.
[11] Kruth, J-P., Stevens, L., Froyen, L. andLauwers, B. 1995. Study of the white layer of a surface machined by die-sinking electro-discharge machining. CIRP Annals-Manufacturing Technology.44 (1):169-172.
[12] Guu, Y. 2005. AFM surface imaging of AISI D2 tool steel machined by the EDM process.Applied Surface Science. 242 (3-4):245-250.
[13] Kumar, B.M., Ramkumar, J., Basu, B. and Kang, S. 2007. Electro-discharge machining performance of TiCN-based cermets. International journal of Refractory Metals and hard materials. 25 (4):293-299.
[14] Zeilmann, R., Ivaninski, T. and Webber, C. 2018. Surface integrity of AISI H13 under different pulse time and depths by EDM process. Procedia CIRP. 71:472-477.
