Photocatalytic degradation of Congo Red dye by using nano ZnO and Ni-Co-ZnO nanocomposites
محورهای موضوعی : Journal of Nanoanalysis
Sara Poorarjmand
1
(Department of Chemistry, North Tehran Branch, Islamic Azad University, Tehran, Iran)
Maryam Kargar Razi
2
(Department of Chemistry, North Tehran Branch, Islamic Azad University, Tehran, Iran)
Ali Reza Mahjoob
3
(Department of Chemistry, Tarbiat Modares University, Tehran, Iran)
Morteza Khosravi
4
(Department of Chemistry, North Tehran Branch, Islamic Azad University, Tehran, Iran)
کلید واژه: Photocatalytic Activity, precipitation method, Ni-Co-ZnO nano composite, UV-C light,
چکیده مقاله :
Photocatalysis has attracted significant attention as a potential issue for the degradation of toxic organic pollutants such as Congo Red. In this research spherical Pure ZnO nano particles and Ni-Co-ZnO nano composites (Zn0.95Ni0.04Co0.01O, Zn0.95Ni0.025Co0.025O and Zn0.95Ni0.01Co0.04O) have been synthesized by precipitation method. X- ray diffraction, Fourier transform Infra Red ,field emission scanning electron microscopy, EDX and ICP analysis confirmed the structure and composition of the samples. The x-ray diffraction analysis (XRD) showed that all samples prepared were about Wurtzite structure and average crystal size of 17nm. Field emission scanning electron microscopy (FESEM) analysis revealed the spherical shape of all samples. The Fourier transform infrared spectroscopy (FT-IR) revealed bands at 435 cm-1, 480 cm-1 and 525 cm-1 are related to Zn-O bonds, related to the stretching vibrating bonds of ZnO. The results illustrated the Ni and Co ions substituted the Zn ions in ZnO crystal lattice successfully. The results showed that some of doped Ni-Co ZnO exhibit enhanced photocatalytic activity , as compared to pure ZnO. Kinetic of de-colorization process for all photo-catalysts followed psedu first order. In degradation process The best photocatlyst was (Zn0.95Ni0.04Co0.01O).
[1]. J. Guoab, Y. Lia, D. Hua & H. Liu, Desalination and Water Treatment, 54, 1 (2015).
[2]. Kh. Kumar, M. Chitkara, I. Singh Sandhu and S. Kumar, Journal of Alloys and Compounds. Volume 588, 681 (2014).
[3] J. Xie, H. Wang, M. Duan and L. Zhang, Applied Surface Science, 257, 6358 (2011).
[4] J. Marto, P.S. Marcos, T. Trindade and J. A. Labrincha,36 (20 163, Issue 1, 15 April 2009, Pages 36-42. 163, 36(2008).
[5]. J. Zhao, L. Wang, X. Yan , Y. Yang , Y. Lei a, J. Zhou , Y. Huang a, Y. Gu and Y. Zhang, Materials Research Bulletin, 45,1207(2011).
[6]. R. Philipus1, A. Noorhidayati1, N. F. Djaja and R. Saleh, Materials Science Forum 827,25 (2015).
[7]. C. Xu, L. Cao, G. Su, W. Liu, X. Qu and Y. Yu, Journal of Alloys and Compounds, 497, 373 (2010).
[8]. V. Eskizeybeka, F. Sarı b, H. Gulceb, A. Gulceb and A. Avcıa, Applied Catalysis B: Environmental 119,197 (2012).
[9]. S. Fabbiyola, L. John Kennedy, U. Aruldoss, M. Bououdina, A.A. Dakhel andJ. JudithVijaya, Powder Technology. 286, 757(2015).
[10]. Ch.Xu, L.Cao,G.Su, W.Liu,X. Qu andY. Yu, Journal of Alloys and Compounds, 497,373 (2010).
[11]. R. John, H. YangYang, H.lu, L.Xu and J. Hu, Applied Surface Science.227,312(2004).
[12]. R. Saleh, N. Febiana Djaja, Superlattices and Microstructures, 74, 217(2014).
[13]. Sh. Yia, J. Cuia, Sh. Li, L. Zhanga, D. Wanga and Y. Lina, Applied Surface Science. 319, 230(2014).
[14]. A. Noorhidayati, S. Adriani, and R. Saleha, Advanced Materials Research , 1123, 241 (2015).
[15]. M. Height, S. Pratsinis, O. Mekasuwandumrong and P.Praserthdam, Applied Catalysis B: Environmental,63,305(2005).
[16] T. Han, C. Wu and C. Hsieh, Materials, Processing, Measurement, and Phenomena , 25, 430 (2007).
[17]. R. Ullah and J. Dutta, Journal of Hazardous Materials, 156, 194 (2007).
[18] S. Kumar and P.D. Sahare,. J.ournal of Rare Earths, 30,761(2012).
[19] J.Z. Kong, A.D. Li, X.Y. Li, H.F. Zhai, W.Q. Zhang,Y.P. Gong, H. Li and D. Wu, Journal of Solid State Chemistry. 183,1359 (2010).
[20] M. Faisal, S.B. Khan, M.M. Rahman, A. Jamal, K.Akhtar, M.M. Abdullah, Journal of Materials Science & Technology, 27,594(2011).
[21] M.M. Ba-Abbad, A.A.H. Kadhum, A.B. Mohamad,M.S. Takriff and K. Sopian. 91,1604 (2013).
[22]. J. Guoab, Y. Lia, D. Hua & H. Liu, Desalination and Water Treatment, 56, 294 (2015).
[23]. Y. J. Xu, Y. B. Zhuang, and X. Z. Fu, Journal of physical chemistry, 114,2669(2010).
[24]. S. Kuriakose, B. Satpatib and S. Mohapatra, Physical Chemistry Chemical Physics. 16, 12741 (2014 ).
[25]. N. Güy, S. Çakar, M. Özacar, Journal of Colloid and Interface Science,466,128 (2016).
[26]. Z. Abdul Fattah, International Journal of Engineering Sciences & Research TechnologY, 5, 418 (2016).
[27]. S. Barad , M. Roudbary, A.N. Omran , M.P. Daryasari , Procedia Technology, 24, 761 ( ٢٠١٦).
[28]. R. Hea, R. K. Hockingb, T. Tsuzuki, Materials Chemistry and Physics , 132, 1035 (2012).
[29]. P. Geetha Devi, A. Sakthi Velu, Journal of Theoretical and Applied Physics , 10, 233 (2016).
[30]. Y. Zhou, L. Ma, M. Gan, M. Ye, X. Li , Y. Zhai , F. Yan , F. Cao , Applied Surface Science,225,4992 (2009).
[31]. A. Parra-Palomino, R. Singhal, P. M. Voyles, Y. Zhu, W. Jia and M. S. Tomar, Nanotechnology,18, 35606 (2007).
[32]. M. Ram, G. S. Arya, K. Parmar, R. K. Kotnala and N. S. Negi, International Journal of Advances in Engineering & Technology, 8,329 (2015).
[33]. F. Rahman, Journal of Advance Research In Science And Engineering 4, 1888 ( 2015).
[34]. S. B. Rana, R. P. P. Singh, Journal of Materials Science, 27, 9346 (2016).
[35]. S. Fabbiyola, L. John Kennedy, U. Aruldoss, M. Bououdina, A.A. Dakhel and J. JudithVijaya, Powder Technology , 286, 757 (2015).
[36]. R. Elilarassi, G. Chandrasekaran, American Journal of Materials Science , 2, 46 (2012).
[37]. T. Kumar Roy, N. Kumar Mondal, Journal of Scientific Research in Environmental Sciences, 2, 457( 2014).
[38]. E. Abdelkader, N. Laouedj and A. Bekka , Chemical Engineering & Process Technology, 2, 106 (2011).
[39]. F. M. Omar, H. A. Aziz, and S. Stoll, Journal of Colloid Science and Biotechnology, 3, 1 (2014).
[40]. H. Chang and M-H Tsai, Adv.Mater.Sci,18, 734(2008).
[41] P. R. Gogate and A. B. Pandit, Advances in Environmental Research. 8, 553- (2004).
[42]. M. Pudukudy , Z. Yaakob, Journal of Cluster Science. 24, 1187(2014)
[43]. A. Kumar Rana , P. Bankar, Y. Kumar , M. A. More , D. J. Late , P. M. Shirage, RSC Advances, 6 , 104318 (2016).
[44]. S. Mortazavinik and M. Yousefi, Russian Journal of Applied Chemistry, 90, 298 (2017).
[45]. M. Mo, J.C. Yu, L. Zhang, S.A. Li, Advanced Materials, 17 , 756 (2005).
[46] S. Husain, F. Rahman, Wasi Khan, and A. H. Naqvi, AIP Conference Proceedings, 17,756 (2005).
[47] P.K. Sharma, R.K. Dutta, A.C. Pandey, Journal of Magnetism and Magnetic Materials, 321, 3457 (2009).
[48]. K.P. Shindea,n, R.C.Pawarb, B.B.Sinhac, H.S.Kima, S.S.Oha and K.C.Chungc, Ceramics International,40, 16799 (2014).
[49]. S. Husain, F. Rahman, N. Ali, P. A. Alvi, Journal of Optoelectronics Engineering, 1, 28 (2013).
[50] K. Ando, H. Saito, Z. Jin, T. Fukumura, and M. Kawasaki, Applied Physics Letters. 78, 2700 (2001).
[51]. J. Jadhav and Somnath Biswas, Journal of Alloys and Compounds, 664,71 (2016).
[52]. T. AHMAD, S. KHATOON and K. COOLAHAN, Bulletin of Materials Science, 36, 997 (2013).
[53]. K. Milenova, I. Avramova , A. Eliyas and V. Blaskov, Environ Sci Pollut Res Int. , ٢١, ١٢٢٤٩ (٢٠١٤).
[54]. R. Sankar Ganesh, E. Durgadevi, M. Navaneethan, V.L. Patil and S. Ponnusamy, Chemical Physics Letters. 689, 92 ( 2017).
[55]. P. M. Shirage, A. Kumar Rana, Y. Kumar1, S. Sen and S. G. Leonardi, RSC Advances, 6 , 82733 (2016).
[56]. K. Milenova, I. Avramova, A. Eliyas and V. Blaskov, Environ Sci Pollut Res. 21,12249 (2014).
