The effect of acid/cellulose ratio on the quality of Cellulose Nanocrystal (CNC) suspension
محورهای موضوعی : Journal of Nanoanalysis
Nasrin Shahmiri
1
(Department of biomedical engineering, Islamic Azad University , Science and Research branch, Tehran, Iran)
Nahid Hassanzadeh Nemati
2
(Department of biomedical engineering, Science and Research branch, Islamic Azad University, Tehran, Iran)
Ahmad Ramazani Saadatabadi
3
(Department of Chemical & Petroleum Engineering, Sharif University of Technology, Tehran, Iran)
Massoud Seifi
4
(Department of Orthodontics, Dental School, Shahid Beheshti University of Medical Sciences, Tehran, Iran)
کلید واژه: Atomic Force Microscopy, Acid hydrolysis, Dynamic Light Scattering, Cellulose Nanocrystal, Acid-to-cellulose ratio,
چکیده مقاله :
Cellulose nanocrystals are promising materials for application in biomedicine, pharmaceutical and food industry. There are various methods for CNC synthesis, but acid hydrolysis is the most common one. The optimization of acid hydrolysis process is still in progress. In the present study, different CNC suspensions were prepared to find out the more efficient acid ratio for CNC production. Whatman #1 filter paper was hydrolyzed via 64 wt% sulfuric acid at acid-to-paper ratio of 10:1 mL/g, 20:1 mL/g, 30:1 mL/g, and 40:1 mL/g. The synthesized CNCs were characterized by DLS, ELS and AFM. The suspensions with acid/cellulose ratio of 20:1 mL/g & 30:1 mL/g resulted in CNCs with more negative surface charge and uniform size. They also represented chiral nematic phase and regular self-organization after layer by layer deposition. It was found that the higher acid-to-paper ratio does not necessarily produce the high quality CNCs. Since the suspension that was prepared at acid/cellulose ratio of 40:1 mL/g had lower negative charge. The size and surface charge of CNCs are highly dependent to acid hydrolysis parameters and ultimately affect their behavior in nano-composites. In spite of many published papers around CNC synthesis by acid hydrolysis, there are still some details that must be addressed and investigated more to prepare the most efficient and applicable CNCs.
Cellulose nanocrystals are promising materials for application in biomedicine, pharmaceutical and food industry. There are various methods for CNC synthesis, but acid hydrolysis is the most common one. The optimization of acid hydrolysis process is still in progress. In the present study, different CNC suspensions were prepared to find out the more efficient acid ratio for CNC production. Whatman #1 filter paper was hydrolyzed via 64 wt% sulfuric acid at acid-to-paper ratio of 10:1 mL/g, 20:1 mL/g, 30:1 mL/g, and 40:1 mL/g. The synthesized CNCs were characterized by DLS, ELS and AFM. The suspensions with acid/cellulose ratio of 20:1 mL/g & 30:1 mL/g resulted in CNCs with more negative surface charge and uniform size. They also represented chiral nematic phase and regular self-organization after layer by layer deposition. It was found that the higher acid-to-paper ratio does not necessarily produce the high quality CNCs. Since the suspension that was prepared at acid/cellulose ratio of 40:1 mL/g had lower negative charge. The size and surface charge of CNCs are highly dependent to acid hydrolysis parameters and ultimately affect their behavior in nano-composites. In spite of many published papers around CNC synthesis by acid hydrolysis, there are still some details that must be addressed and investigated more to prepare the most efficient and applicable CNCs.
1. S A. Cellulose/calcium phosphate hybrids: New materials for biomedical and environmental applications. International Journal of Biological Macromolecules. 2019.
2. SS GJ. Cellulose nanocrystals: synthesis, functional properties, and applications. Nanotechnology, Science and Applications. 2015;8:45-54.
3. Lizundia E PD NT-D, Armentano I. Cellulose nanocrystal based multifunctional nanohybrids. Progress in Materials Science. 2020.
4. Yang Y CZ ZJ, Wang G, Zhang R, Dingjie S. Preparation and Applications of the Cellulose Nanocrystal. International Journal of Polymer Science. 2019.
5. A S. An investigation of carbon nanotubes on shear stress, thermal conductivity and the viscosity of Nanofluids. Journal of Nanoanalysis. 2020;7(4):1-7.
6. A S. Using NiFe 2 O 4 as a nano photocatalyst for degradation of polyvinyl alcohol in synthetic wastewater. Environmental Challenges. 2021;5.
7. Karimi S SA. The removal of Hexavalent chromium; (Cr (VI)) by ZnO/LECA as a nano photocatalyst using full factorial experimental design. Journal of Nanoanalysis. 2021;8(3):167-75.
8. A S. Employing Sono-Fenton Process for Degradation of 2-Nitrophenol in Aqueous Environment Using Box–Behnken Design Method and Kinetic Study1. Russian Journal of Physical Chemistry A. 2019;93(2):243-49.
9. A S. Using Mn based on lightweight expanded clay aggregate (LECA) as an original catalyst for the removal of NO2 pollutant in aqueous environment. Surfaces and Interfaces. 2020;21.
10. Saghi M SA, Arastehnodeh A, Khazaeinejad M, Nozari A. The photo degradation of methyl red in aqueous solutions by α-Fe2O3/SiO2 nano photocatalyst. Journal of Nanoanalysis. 2018;5(3):163-70.
11. Hekmatshoar R YA, Shokri A. Using ZnO based on Bentonite as a nano photocatalyst for degradation of Acid Red 114 in synthetic wastewater. Journal of Nanoanalysis. 2020;7(4):1-10.
12. A S. Degradation of Terphetalic Acid from Petrochemical Wastewater by Ozonation and O3/ZnO Processes in Semi Batch Reactor. Archives of Hygiene Sciences. 2017;6(4):348-55.
13. Albernaz VL JG LC, Silva LP. Cellulose Nanocrystals Obtained from Rice By-Products and Their Binding Potential to Metallic Ions. Journal of Nanomaterials. 2015.
14. Elfeky AS SS EA, Owda ME, Eladawy HA, Saeed AM, Awad MA, Abou-Zeid RE, Fouda A. Multifunctional cellulose nanocrystal /metal oxide hybrid, photo-degradation, antibacterial and larvicidal activities. Carbohydrate Polymers. 2019.
15. Kargarzadeh H IM AI, Thomas S, Dufresne A. Handbook of Nanocellulose and Cellulose Nanocomposites. KGaA: Wiley-VCH Verlag GmbH & Co; 2017.
16. Y J. MANUFACTURING OF NANOCRYSTALLINE CELLULOSE. Espoo, Finland: Aalto University; 2017.
17. N C. Preparation and characterization of nanocellulose from wheat bran: Lund University; 2017.
18. Nascimentoa JHOD LR GF, Melob JDD, Oliveiraa FR, Ladchumananandasivama R, Zillec A. Extraction and Characterization of Cellulosic Nanowhisker obtained from Discarded Cotton Fibers. Materials Today: Proceedings. 2015;2:1-7.
19. Zhou YM FS ZL, Zhan HY. Effect of nanocellulose isolation techniques on the formation of reinforced poly(vinyl alcohol) nanocomposite films. eXPRESS Polymer Letters. 2012;6(10):794-804.
20. Maturavongsadit P PG SR, Benhabbour SR. Thermo-/pH-Responsive Chitosan-Cellulose Nanocrystal Based Hydrogel with Tunable Mechanical Properties for Tissue Regeneration Applications. Materialia. 2020;12.
21. HY LP. Preparation and properties of cellulose nanocrystal: Rods, spheres, and network. Carbohydrate Polymers. 2010;82:329-36.
22. Ferla BL ZL BP, Gennaro PD. Cellulose nanocrystals as promising nanodevices in the biomedical field. AIP Conference Proceedings. 2018.
23. Reid MS VM CE. Benchmarking Cellulose Nanocrystals: From the Laboratory to Industrial Production. Langmuir. 2017;33(7):1583-98.
24. Prathapan R TR GG, Hu J. The recent progress of cellulose nanocrystals alignment and its applications. ACS Applied Biomaterials. 2020.
25. E D. Basic Principles of Colloid Science. Cambridge: The Royal Society of Chemistry; 1988.
26. Rehman N BC MM, Rosa SML. Dynamics of Cellulose Nanocrystals in the Presence of Hexadecyltrimethylammonium Bromide. Macromolecular Research. 2017.
27. L T. Cellulose Nanocrystals: Particle Size Distribution and Dispersion in Polymer Composites. Ottawa, Canada: University of Ottawa; 2016.
28. Kandhola G DA RK, Labbé N, Sakon J, Carrier DJ, Kim JW. Maximizing production of cellulose nanocrystals and nanofibers from pre‑extracted loblolly pine kraft pulp: a response surface approach. Bioresources and Bioprocessing. 2020;7(19).
29. Feng. Improving homogeneity of iridescent cellulose nanocrystal films by surfactant assisted spreading self-assembly. ACS Sustainable Chemistry & Engineering. 2019;7(23):19062-71.
30. Hamad. 2017.
31. Santana MF SM YF, Moreira BC, Almeida JMD, Teixeira AVNDC, Silva DDJ. CELLULOSE NANOCRYSTAL PRODUCTION FOCUSING ON CELLULOSIC MATERIAL PRE-TREATMENT AND ACID HYDROLYSIS TIME. O PAPEL. 2019;80(03):59-66.
32. MascheroniE RR OM, Piva G, Bonetti S, Piergiovanni L. Comparison of cellulose nanocrystals obtained by sulfuric acid hydrolysis and ammonium persulfate, to be used as coating on flexible food-packaging materials. Cellulose. 2016.
33. MX GD. Chiral nematic structure of cellulose nanocrystal suspensions and films; Polarized light and atomic force microscopy. Materials. 2015;8(11):7873-88.
34. H W. Cellulose nanocrystals: properties, production, and applications. Chichester: John Wiley & Sons; 2017.
35. Hynninen V MP WW, Hietala S, Linder MB, Ikkala O, Nonappa. Methyl cellulose/cellulose nanocrystal nanocomposite fibers with high ductility. European Polymer Journal. 2019;112:34-45.
36. Ivanova A F-PB PA, Wagner T, Jumabekov AN, Vilk Y, Weber J, Gunne J, Vignolini S, Tiemann M, Fattakhova-Rohlfing D, Bein T. Cellulose nanocrystal-templated tin dioxide thin film for gas sensing. ACS Applied Materials & Interfaces. 2020;12(11):12639-47.
37. Li W JB ZS. Preparation of cysteamine-modified cellulose nanocrystal adsorbent for removal of mercury ions from aqueous solutions. Cellulose. 2019;26:4971-85.
38. Or T SS EA, Osorio DA, De France KJ, Vapaavuori J, Hoare T, Cerf A, Cranston ED, Moran-Mirabal JM. Patterned cellulose nanocrystal aerogel films with tunable dimensions and morphologies as ultra-porous scaffolds for cell culture. ACS Applied Nano Materials. 2019;2(7):4169-79.
39. Wang J PT XZ, Nigmatullin R, Harniman RL, Eichhorn SJ. Cellulose nanocrystal-polyetherimide hybrid nanofibrous interleaves for enhanced interlaminar fracture toughness of carbon fibre/epoxy composites. Composites Science and Technology. 2019;182.
40. Zhao TH PR WC, Lim KTP, Frka-Petesic B, Vignolini S. Printing of responsive photonic cellulose nanocrystal microfilm arrays. Advanced Functional Materials. 2019;29(21).
41. Vanderfleet OM OD CE. Optimization of cellulose nanocrystal length and surface charge density through phosphoric acid hydrolysis. Philosiphical Transactions A royalsocietypublishing. 2017;376.
42. Kano FS SA RD. Variation of the milling conditions in the obtaining of nanocellulose from the paper sludge. RevistaMateria. 2019;24(3).
43. Jakubek ZJ CM CM, Leng T, Liu L, Zou S, Baxa U, Clogston JD, Hamad WY, Johnston LJ. Characterization challenges for a cellulose nanocrystal reference material: dispersion and particle size distributions. Journal of Nanoparticle Research. 2018;20.
44. Sadeghifar H FI, Clarke SP, Brougham DF, Argyropoulos DS. Production of cellulose nanocrystals using hydrobromic acid and click reactions on their surface. Journal of Materials Science. 2011;46:7344-55.
45. DC BY. Analysis of Cellulose Nanocrystal Rod Lengths by Dynamic Light Scattering and Electron Microscopy. Journal of Nanoparticle Research. 2014;16(1):2174.
46. Chen M PJ MA, Couillard M, Zou S, Hackley VA, Johnston LJ. Characterization of size and aggregation for cellulose nanocrystal dispersions separated by asymmetrical-flow field-flow fractionation. Cellulose (Lond). 2019;27(4).
47. Scognamiglio F SC RG. Extraction of Cellulose Nanocrystals (NCC) from Cotton Waste and Morphology of NCC Obtained with Different Alkali Neutralization. Current Journal of Applied Science and Technology. 2019;36(5):1-8.
48. Zhou Y FS ST, Isogai A. Characterization of Concentration-Dependent Gelation Behavior of Aqueous TEMPO-Cellulose Nanocrystal Dispersions Using Dynamic Light Scattering. Biomacromolecules. 2018.
49. Balding P LM WQ, Volkovinsky R, Russo P. Cellulose Nanocrystal−Polyelectrolyte Hybrids for Bentonite Water- Based Drilling Fluids. ACS Applied Biomaterials. 2020.
50. AY PV. Nanosuspension: an approach to enhance solubility of drugs. J Adv Pharm Technol Res. 2011;2:81-7.
51. Zhao G ZS ZS, Pan M. Fabrication and characterization of photonic cellulose nanocrystal films with structural colors covering full visible light. Journal of Material Science, Polymers & biopolymers. 2020.
52. Qiao C CG ZJ, Yao, J. Structure and rheological properties of cellulose nanocrystals suspension. Food Hydrocolloids. 2016;55:19-25.
53. Leite LSF FC CeA, Moreira FKV, Mattoso LHC. Scaled-up production of gelatin-cellulose nanocrystal bionanocomposite films by continuous casting. Carbohydrate Polymers. 2020.
54. Han JQ ZC WY, Liu FY, Wu QL. Selfassembling behavior of cellulose nanoparticles during freeze-drying: effect of suspension concentration, particle size, crystal structure, and surface charge. Biomacromolecules. 2013;14:1529-40.
55. Mabrouk AB DA BS. Cellulose nanocrystal as ecofriendly stabilizer for emulsion polymerization and its application for waterborne adhesive. Carbohydrate Polymers. 2019.
56. B Z. Multi-functional coating of polymeric spherulites for chiral photonic cellulose nanocrystal films. Cellulose. 2020.
57. Samadder R AN RA, Uddin M, Hossen J, Azam S. Magnetic nanocomposite based on polyacrylic acid and carboxylated cellulose nanocrystal for the removal of cationic dye. RSC Advances. 2020;10:11945-56.
58. Jia C CL SZ, Agarwal UP, Hu L, Zhu JY. Using a fully recyclable dicarboxylic acid for producing dispersible and thermally stable cellulose nanomaterials from different cellulosic sources. Cellulose. 2017;24(6):2483-98.
59. Ribeiro RSA BN JN. Statistical analysis of the crystallinity index of nanocellulose produced from Kraft pulp via controlled enzymatic hydrolysis. Biotechnology and Applied Biochemistry. 2019.
60. Shanmugarajah B KP CI, Choong TSY, Tan KW. Isolation of nanocrystalline cellulose (NCC) from palm oil empty fruit bunch (EFB): Preliminary result on FTIR and DLS analysis. Chemical Engineering Transactions. 2015;45:1705-10.
61. Rashtchian M HA BS, Milan PB, Simorgh S. Fabricating alginate/poly(caprolactone) nanofibers with enhanced bio-mechanical properties via cellulose nanocrystal incorporation. Carbohydrate Polymers. 2020.
62. Brinkmann A CM CM, Jakubek ZJ, Leng T, Johnston LJ. Correlating Cellulose Nanocrystal Particle Size and Surface Area. Langmuir. 2016;32:6105−14.
63. Sun B ZM HQ, Liu R, Wu T, Si C. Further characterization of cellulose nanocrystal (CNC) preparation from sulfuric acid hydrolysis of cotton fibers. Cellulose. 2016;23:439-50.
64. Ren S SX LT, Wu Q. The effect of chemical and high-pressure homogenization treatment conditions on the morphology of cellulose nanoparticles. J Nanomater. 2014.
65. Pinheiro JA MN, Villetti MA, Balaban RDC. Polymer-Decorated Cellulose Nanocrystals as Environmentally Friendly Additives for Olefin-Based Drilling Fluids. International Journal of Molecular Sciences. 2021;22(352).
66. Boluk Y LR ZL, McDermott MT. Suspension viscosities and shape parameter of cellulose nanocrystals (CNC). Colloids Surf A. 2011;377(1-3):297–303.
67. PA WA. Low-shear viscosities of (semi-)dilute, aqueous dispersions of charged boehmite rods: dynamic scaling of double layer effects. Langmuir. 1997;13(17):4574-82.
68. Kuang Y LX, Luan P, Zhang X, Xu J, Mo L, Gong J, Li J. Cellulose II nanocrystal: a promising bio-template for porous or hollow nano SiO2 fabrication. Cellulose. 2020.
69. Diao H ZZ, Liu Y, Song Z, Zhou L, Duan Y, Zhang J. Facile fabrication of carboxylated cellulose nanocrystal–MnO2 beads for high-efficiency removal of methylene blue. Cellulose. 2020.
70. Prihatiningtyas I LY HY, Vananroye A, Coenen N, Van der Bruggen B. Effect of solvent on the morphology and performance of cellulose triacetate membrane/cellulose nanocrystal
nanocomposite pervaporation desalination membranes. Chemical Engineering Journal. 2020.
71. Lagerwall JPF StC SM, Noh JH, Park JH, Scalia G, Bergstro¨m L. Cellulose nanocrystal-based materials: From liquid crystal self-assembly and glass formation to multifunctional thin films. NPG Asia MateriaL. 2014;1(6):1-12.
72. Reid MS VM CE. Cellulose Nanocrystal Interactions Probed by Thin Film Swelling to Predict Dispersibility. Nanoscale. 2016;8(24):12247-57.
73. Beck-Candanedo S RM GD. Effect of Reaction Conditions on the Properties and Behavior of Wood Cellulose Nanocrystal Suspensions. Biomacromolecules. 2005;6(2):1048-54.
74. Brito BSL PF PJ, Jean B. Preparation, morphology and structure of cellulose nanocrystals from babmboo fibers. Cellulose. 2012;19:1527-36.
