A Hybrid Unconscious Search Algorithm for Mixed-model Assembly Line Balancing Problem with SDST, Parallel Workstation and Learning Effect
محورهای موضوعی : Strategic Management
Moein Asadi-Zonouz
1
(Department of Industrial ans Systems Engineering, Tarbiat Modares University, Tehran, Iran)
Majid Khalili
2
(Department of Industrial Engineering, Islamic Azad University Karaj Branch,Alborz,Iran)
Hamed Tayebi
3
(Department of Industrial Engineering, Islamic Azad University Karaj Branch, Alborz, Iran)
کلید واژه: Assembly line balancing problem, Unconscious Search algorithm, Learning Effect, Parallel workstation, Sequence-dependent setup times,
چکیده مقاله :
Due to the variety of products, simultaneous production of different models has an important role in production systems. Moreover, considering the realistic constraints in designing production lines attracted a lot of attentions in recent researches. Since the assembly line balancing problem is NP-hard, efficient methods are needed to solve this kind of problems. In this study, a new hybrid method based on unconscious search algorithm (USGA) is proposed to solve mixed-model assembly line balancing problem considering some realistic conditions such as parallel workstation, zoning constraints, sequence dependent setup times and learning effect. This method is a modified version of the unconscious search algorithm which applies the operators of genetic algorithm as the local search step. Performance of the proposed algorithm is tested on a set of test problems and compared with GA and ACOGA. The experimental results indicate that USGA outperforms GA and ACOGA.
Akpınar, S., & Bayhan, G. M. (2011). A hybrid genetic algorithm for mixed model assembly line balancing problem with parallel workstations and zoning constraints. Engineering Applications of Artificial Intelligence, 24(3), 449-457.
AkpıNar, S., Bayhan, G. M., & Baykasoglu, A. (2013). Hybridizing ant colony optimization via genetic algorithm for mixed-model assembly line balancing problem with sequence dependent setup times between tasks. Applied Soft Computing, 13(1), 574-589.
Akpinar, Ş., & Baykasoğlu, A. (2014a). Modeling and solving mixed-model assembly line balancing problem with setups. Part I: A mixed integer linear programming model. Journal of Manufacturing Systems, 33(1), 177-187.
Akpinar, Ş., & Baykasoğlu, A. (2014b). Modeling and solving mixed-model assembly line balancing problem with setups. Part II: A multiple colony hybrid bees algorithm. Journal of Manufacturing Systems, 33(4), 445-461.
Andres, C., Miralles, C., & Pastor, R. (2008). Balancing and scheduling tasks in assembly lines with sequence-dependent setup times. European Journal of Operational Research, 187(3), 1212-1223.
Ardjmand, E., & Amin-Naseri, M. R. (2012). Unconscious search-a new structured search algorithm for solving continuous engineering optimization problems based on the theory of psychoanalysis. In Advances in swarm intelligence (pp. 233-242): Springer.
Ardjmand, E., Park, N., Weckman, G., & Amin-Naseri, M. R. (2014). The discrete Unconscious search and its application to uncapacitated facility location problem. Computers & industrial engineering, 73, 32-40.
Biskup, D. (1999). Single-machine scheduling with learning considerations. European Journal of Operational Research, 115(1), 173-178.
Bowman, E. H. (1960). Assembly-line balancing by linear programming. Operations Research, 8(3), 385-389.
Buxey, G. (1974). Assembly line balancing with multiple stations. Management science, 20(6), 1010-1021.
Cohen, Y., Vitner, G., & Sarin, S. C. (2006). Optimal allocation of work in assembly lines for lots with homogenous learning. European Journal of Operational Research, 168(3), 922-931.
Delice, Y., Aydoğan, E. K., Özcan, U., & İlkay, M. S. (2017). A modified particle swarm optimization algorithm to mixed-model two-sided assembly line balancing. Journal of Intelligent Manufacturing, 28(1), 23-36.
Fattahi, P., & Askari, A. (2018). A Multi-objective mixed-model assembly line sequencing problem with stochastic operation time. Journal of Optimization in Industrial Engineering, 11(1), 157-167.
Fattahi, P., & Samouei, P. (2016). A Multi-Objective Particle Swarm Optimization for Mixed-Model Assembly Line Balancing with Different Skilled Workers. Journal of Optimization in Industrial Engineering, 9(20), 9-18.
Gansterer, M., & Hartl, R. F. (2018). One-and two-sided assembly line balancing problems with real-world constraints. International Journal of Production Research, 56(8), 3025-3042.
Gokcen, H., & Erel, E. (1997). A goal programming approach to mixed-model assembly line balancing problem. International Journal of Production Economics, 48(2), 177-185.
Gökċen, H., & Erel, E. (1998). Binary integer formulation for mixed-model assembly line balancing problem. Computers & industrial engineering, 34(2), 451-461.
Gunther, R. E., Johnson, G. D., & Peterson, R. S. (1983). Currently practiced formulations for the assembly line balance problem. Journal of Operations Management, 3(4), 209-221.
Hamta, N., Ghomi, S. F., Jolai, F., & Shirazi, M. A. (2013). A hybrid PSO algorithm for a multi-objective assembly line balancing problem with flexible operation times, sequence-dependent setup times and learning effect. International Journal of Production Economics, 141(1), 99-111.
Hamzadayi, A., & Yildiz, G. (2012). A genetic algorithm based approach for simultaneously balancing and sequencing of mixed-model U-lines with parallel workstations and zoning constraints. Computers & industrial engineering, 62(1), 206-215.
Haq, A. N., Rengarajan, K., & Jayaprakash, J. (2006). A hybrid genetic algorithm approach to mixed-model assembly line balancing. The International Journal of Advanced Manufacturing Technology, 28(3-4), 337-341.
Hyun, C. J., Kim, Y., & Kim, Y. K. (1998). A genetic algorithm for multiple objective sequencing problems in mixed model assembly lines. Computers & Operations Research, 25(7), 675-690.
Kilbridge, M. D., & Wester, L. (1961). A heuristic method of assembly line balancing. Journal of Industrial Engineering, 12(4), 292-298.
Koltai, T., & Kalló, N. (2017). Analysis of the effect of learning on the throughput-time in simple assembly lines. Computers & industrial engineering, 111, 507-515.
Li, Z., Janardhanan, M. N., Tang, Q., & Ponnambalam, S. (2019). Model and metaheuristics for robotic two-sided assembly line balancing problems with setup times. Swarm and Evolutionary Computation, 50, 100567.
Lolli, F., Balugani, E., Gamberini, R., & Rimini, B. (2017). Stochastic assembly line balancing with learning effects. IFAC-PapersOnLine, 50(1), 5706-5711.
Manavizadeh, N., Hosseini, N.-s., Rabbani, M., & Jolai, F. (2013). A Simulated Annealing algorithm for a mixed model assembly U-line balancing type-I problem considering human efficiency and Just-In-Time approach. Computers & industrial engineering, 64(2), 669-685.
Moradi, H., & Zandieh, M. (2013). An imperialist competitive algorithm for a mixed-model assembly line sequencing problem. Journal of Manufacturing Systems, 32(1), 46-54.
Mosheiov, G. (2001). Scheduling problems with a learning effect. European Journal of Operational Research, 132(3), 687-693.
Nourmohammadi, A., Zandieh, M., & Tavakkoli-Moghaddam, R. (2013). An imperialist competitive algorithm for multi-objective U-type assembly line design. Journal of Computational Science, 4(5), 393-400.
Özcan, U., & Toklu, B. (2010). Balancing two-sided assembly lines with sequence-dependent setup times. International Journal of Production Research, 48(18), 5363-5383.
Rabbani, M., Aliabadi, L., & Farrokhi-Asl, H. (2019). A Multi-Objective Mixed Model Two-Sided Assembly Line Sequencing Problem in a Make–to-Order Environment with Customer Order Prioritization. Journal of Optimization in Industrial Engineering, 12(2), 1-20.
Seyed-Alagheband, S., Ghomi, S. F., & Zandieh, M. (2011). A simulated annealing algorithm for balancing the assembly line type II problem with sequence-dependent setup times between tasks. International Journal of Production Research, 49(3), 805-825.
Thomopoulos, N. T. (1967). Line balancing-sequencing for mixed-model assembly. Management science, 14(2), B-59-B-75.
Thomopoulos, N. T. (1970). Mixed model line balancing with smoothed station assignments. Management science, 16(9), 593-603.
Toksarı, M. D., İşleyen, S. K., Güner, E., & Baykoç, Ö. F. (2008). Simple and U-type assembly line balancing problems with a learning effect. Applied Mathematical Modelling, 32(12), 2954-2961.
Toksarı, M. D., İşleyen, S. K., Güner, E., & Baykoç, Ö. F. (2010). Assembly line balancing problem with deterioration tasks and learning effect. Expert systems with Applications, 37(2), 1223-1228.
Tonge, F. M. (1960). A heuristic program for assembly line balancing.
Vilarinho, P. M., & Simaria, A. S. (2002). A two-stage heuristic method for balancing mixed-model assembly lines with parallel workstations. International Journal of Production Research, 40(6), 1405-1420.
Yagmahan, B. (2011). Mixed-model assembly line balancing using a multi-objective ant colony optimization approach. Expert systems with Applications, 38(10), 12453-12461.
Yemane, A., Gebremicheal, G., Hailemicheal, M., & Meraha, T. (2020). Productivity Improvement through Line Balancing by Using Simulation Modeling. Journal of Optimization in Industrial Engineering, 13(1), 153-165.
Yolmeh, A., & Kianfar, F. (2012). An efficient hybrid genetic algorithm to solve assembly line balancing problem with sequence-dependent setup times. Computers & industrial engineering, 62(4), 936-945.
Yuan, B., Zhang, C., Shao, X., & Jiang, Z. (2015). An effective hybrid honey bee mating optimization algorithm for balancing mixed-model two-sided assembly lines. Computers & Operations Research, 53, 32-41.
Zhong, Y., Deng, Z., & Xu, K. (2019). An effective artificial fish swarm optimization algorithm for two-sided assembly line balancing problems. Computers & Industrial Engineering, 138, 106121.
