Buckling Analysis of Rectangular Functionally Graded Plates with an Elliptic Hole Under Thermal Loads
محورهای موضوعی : Engineering
R Rezae
1
(Faculty of Mechanical Engineering, University of Shahrood)
A.R Shaterzadeh
2
(Faculty of Mechanical Engineering, University of Shahrood)
S Abolghasemi
3
(Faculty of Mechanical Engineering, University of Shahrood)
کلید واژه: Finite Element Analysis, Thermal buckling, FG plates, Elliptic hole,
چکیده مقاله :
This paper presents thermal buckling analysis of rectangular functionally graded plates (FG plates) with an eccentrically located elliptic cutout. The plate governing equations derived by the first order shear deformation theory (FSDT) and finite element formulation is developed to analyze the plate behavior subjected to a uniform temperature rise across plate thickness. It is assumed that the non-homogenous material properties vary through the plate thickness according to a power function. The developed finite element (FE) code with an extended mesh pattern is written in MATLAB software. The effects of aspect ratio of the plate, ellipse radii ratio, position and orientation of the cutout, boundary conditions (BCs) and volume fraction exponent are investigated in details. The results of present code are compared with those available in the literature and some useful design-orientated conclusions are achieved.
[1] Bodaghi M., Saidi A.R., 2010, Levy-type solution for buckling analysis of thick functionally graded rectangular plates based on the higher-order shear deformation plate theory, Applied Mathematical Modelling 34: 3659-3673.
[2] Samsam Shariat B.A., Eslami M.R., 2006, Thermal buckling of imperfect functionally graded plates, International Journal of Solids and Structures 43: 4082-4096.
[3] Weibgraebera P., Mittelstedtb C., Beckera W., 2012, Buckling of composite panels: A criterion for optimum stiffener design, Aerospace Science and Technology 16(1):10-18.
[4] Zhao X., Lee Y.Y., Liew K.M., 2009, Mechanical and thermal buckling analysis of functionally graded plates, Composite Structures 90: 161-171.
[5] Ghosh M.K., Kanoria M., 2009, Analysis of thermoelastic response in a functionally graded spherically isotropic hollow sphere based on Green–Lindsay theory, Acta Mechanica 207: 51-67.
[6] Mahdavian M., 2009, Buckling analysis of simply-supported functionally graded rectangular plates under non-uniform in-plane compressive loading, Journal of Solid Mechanics 1(3):213-225.
[7] Samsam Shariat B.A., Eslami M.R., 2007, Buckling of thick functionally graded plates under mechanical and thermal loads, Composite Structures 78: 433-439.
[8] Xiang S., Kang G., 2013, A nth-order shear deformation theory for the bending analysis on the functionally graded plates, European Journal of Mechanics A/Solids 37:336-343.
[9] Mozafaria H., Ayob A., 2012, Effect of thickness variation on the mechanical buckling load in plates made of functionally graded materials, Procedia Technology 1: 496-504.
[10] Raki M., Alipour R., Kamanbedast A., 2012, Thermal buckling of thin rectangular FGM plate, World Applied Sciences Journal 16(1): 52-62.
[11] Avci A., Sahin O.S., Uyaner M., 2005, Thermal buckling of hybrid laminated composite plates with a hole, Composite Structures 68: 247-254.
[12] Zhen W., Wanji C., 2009, Stress analysis of laminated composite plates with a circular hole according to a single-layer higher-order model, Composite Structures 90: 122-129.
[13] Kiani Y., Eslami M.R., 2013, An exact solution for thermal buckling of annular FGM plates on an elastic medium, Composites: Part B 45:101-110.
[14] Thai H.T., Choi D.H., 2012, An efficient and simple refined theory for buckling analysis of functionally graded plates, Applied Mathematical Modelling 36: 1008-1022.
[15] Saji D., Varughese B., 2008, Finite element analysis for thermal buckling behaviour in functionally graded plates with cut-outs, Proceedings of the International Confrence on Aerospace Science and Technology, Bangalore India.
[16] Natarajan S., Chakraborty S., Ganapathi M., Subramanian M., 2014, A parametric study on the buckling of functionally graded material plates with internal discontinuities using the partition of unity method, European Journal of Mechanics - A/Solids 44: 136-147.
[17] Zenkour A. M., Mashat D. S., 2010, Thermal buckling analysis of ceramic-metal functionally graded plates, Natural Science 2(9):968-978.
[18] Saidi A. R., Baferani A. H., 2010, Thermal buckling analysis of moderately thick functionally graded annular sector plates, Composite Structures 92:1744-1752.
[19] Park J.S., Kim J.H., 2006, Thermal post buckling and vibration analyses of functionally graded plates, Journal of Sound and Vibration 289: 77-93.
[20] Yang J., Shen H.S., 2002, Vibration characteristics and transient response of shear-deformable functionally graded plates in thermal environments, Journal of Sound and Vibration 255:579-602.
[21] Reddy J. N., 2006, Theory and Analysis of Elastic Plates and Shells, Second edition, CRC press.
[22] Efraim E., Eisenberger M., 2007, Exact vibration analysis of variable thickness thick annular isotropic and FGM plates, Journal of Sound and Vibration 299:720-738.
[23] Logan D. L., 2010, A First Course in the Finite Element Method, Fourth edition.
