Simulation of Gain in Semiconductor Optical Amplifier Tension
محورهای موضوعی : Majlesi Journal of Telecommunication Devices
1 - Master of Electrical Engineering, Islamic Azad University, Science and Research Kurdistan
چکیده مقاله :
The structure of an optical communication system similar to any other electrical connection system consists of several elements, including the transmitter (light source), medium (fiber optic) and receiver (optical detector) is. Standard single-mode fibers for data transmission at wavelengths normally used 33/1 micrometers and 55.1 micrometers. Optical fibers in the wavelength range of the losses are insignificant. Despite the low loss optical fibers for data transmission over long distances (more than 50 km), the need to strengthen our optical pulses again. Therefore, the optical amplifiers are required. Semiconductor optical amplifier polarization is sensitive to the structure used to relieve tension. The advantages of optical communication devices compared to other communication devices, such as bandwidth, low weight, low-loss optical fiber, flexibility, safety data sent against electromagnetic interference and inexpensive noted.
[1] P. Urquhart, “Review of Rare Earth Doped Fibre Lasers and Amplifiers,” pp. 385–407, 1988.
[2] Y. Aoki, “Properties of Fiber Raman Amplifiers and Their Applicability to Digital Optical Communication Systems,” Light. Technol, vol. 6, no. 7, pp. 1225–1239, 1988.
[3] J. C. Simon, “Semiconductor laser Amplifier for single mode fihcr communication systems,” vol. 4, pp. 52–63, 1983.
[4] O. N. ANDERS, “Semiconductor Optical Amplifiers,” IEEE, vol. 80, pp. 375–382, Mar. 1992.
[5] E. Desurvire, “Erbium-Doped Fibre Amplifiers: Principles and Applications,” John Wiley N. Y.
[6] M. W.J, “Erbium-Doped Glass for Amplifiers at 1550 nm,” IEEE J Light. Technol, vol. 9, pp. 234–250, 1991.
[7] Shoichi Sudo, Optical Fiber Amplifiers: Materials, Devices, and Applications. Artech House Optoelectronics Library, 1997.
[8] M. j Connelly, Semiconductor optical Amplifiers. university of Limerick,Ireland: Kluwer Academic, 2002.
[9] C. Politi, M. J. O’Mahony, and D. Klonidis, “Dynamic behavior of wavelength converters based on FWM in SOAs,” IEEE J Quantum Electron. vol. 44, pp. 108–125, Feb. 2006.
[10] D. K.Cheng, field and wave Electromagnetics, 16th ed. Univercity of tehran, 2009.
[11] M. J. Connelly, “Wide-Band Steady-State Numerical Model and Parameter Extraction of a Tensile-Strained Bulk Semiconductor Optical Amplifier,” IEEE J. QUANTUM Electron. vol. 43, pp. 47–56, Jan. 2007.
[12] S. D. Personick, “Applications for quantum amplifiers in simple digital optical communication systems 8,” Bell Syst, vol. 52, pp. 117–133, 1973.
[13] G. Zeidler, “Use of laser Amplifiers in glass fibre communication systems 7,” Siemens Forch, pp. 227–234, 1973.
[14] Y. Yamamoto, “Characteristics of AlGaAs Fabry-Perot cavity type laser amplifiers 9,” IEEE J Quantum Electron, vol. 16, pp. 1047–1052, 1980.
[15] J. C. Simon, “GaInAsP Semiconductor laser Amplifiers for single-mode fibre communications 11,” IEEEOSA J Light. Technol, vol. 5, pp. 1286–1295, 1987.
[16] govind Agrawal, “Self-Phase Modulation and Spectral Broadening of Optical Pulses in Semiconductor Laser Amplifiers,” lEEE, vol. 25, 1989.
[17] Kyoung Sun Choi, “All-optical OR/NOR bi-functional logic gate by using cross-gain modulation in semiconductor optical,” Korean Phys. Soc. vol. 56, pp. 1093–1096, 2010.
[18] K. E. Stubkjaer, “Semiconductor Optical Amplifier-Based All-Optical Gates for High-Speed Optical Processing IEEE JOURNAL ON SELECTED TOPICS IN QUANTUM ELECTRONICS,” vol. 6, Dec. 2000.
[19] S. D. Personick, “Applications for quantum amplifiers in simple digital optical communication systems 1-8,” Bell Sysr Tech J, vol. 52, pp. 117–133, 1973.
[20] Y. Yamamoto, “Characteristics of AlGaAs Fabry-Perot cavity type laser amplifiers 1-8,” IEEE J Quantum Electron, vol. QE-16, no. 10, pp. 1047–1052, 1980.
[21] Y. Yamamoto and T. Kimura, “Coherent optical fiber transmission systems 1-8,” IEEE J Quantum Electron, vol. QE-17, pp. 897–905, 1981.
[22] H. A. Steinberg, “The use of a laser amplifier in a laser communication system 1-8,” Proc IEEE, vol. 51, p. 943, 1963.
[23] G. Zeidler and and D. Schicketanz, “Use of laser amplifiers in a glass fiber communications system 1-8,” Siemens Forsch -U Entwickl, pp. 227–234, 1973.
[24] D.T. Schaafsma and E.M. Bradley, “Cross-gain modulation and frequency conversion crosstalk effects in 1550-nm gain-clamped semiconductor optical amplifiers,” IEEE Photon Technol Lett, pp. 727–729, 1999.
[25] Katsuaki Magari, “Polarization-Insensitive Optical Amplifier with Tensile-Strained-Barrier MQW Structure,” IEEE J. QUANTUM Electron. vol. 30, NO. 3, Mar. 1994.
[26] H. Soto, D. Erasme, G. C. Guekos, et a1. ““5-Gb/s XOR Optical Gate Based on Cross-Polarization Modulation in Semiconductor Optical Amplifiers 13,” IEEE Photonics Technol. Lett. vol. 13, No. 4, pp. 335–337, 2001.
[27] H. Soto, C. A. Diaz, J. Topomondzo, “All-Optical AND Gate Implementation Using Cross-Polarization Modulation in A Semiconductor Optical Amplifier 13,” IEEE Photonic Technol. Lett. vol. 14, No. 4, pp. 498–500, 2002.
[28] “Nonlinear Polarization Rotation Characteristic Phenomenon in a Bulk Semiconductor Optical Amplifier 13,” Opt. Photonics J. pp. 187–191, 2013.
[29] L. L. Yi, W.S. Hu, et al, “All-Optical Reconfigurable Multi-Logic Gates Based on Nonlinear Polarization Rota-tion Effect in A Single SOA 13,” Chin. Opt. Lett. vol. 9, No. 3, pp. 1–4, 2011.
[30] P. Morin, J. Fatome, C. Finot, “All-Optical Nonli-near Processing of Both Polarization State and Intensity Profile for 40 Gbit/s Regeneration Applications,” Optics Express 13,” vol. 19, No. 18, pp. 17158–17166, 2011.
[31] M. Cheng, C. Q. Wu, et al, “Cascaded Optical Buffer Based on Nonlinear Polarization Rotation in Semiconductor Optical Amplifiers 13,” Chin. Phys. Lett. vol. 25, No. 11, pp. 4026–4629, 2008.
[32] S. K. Garai, “A Method of Developing Frequency En-coded Multi-Bit Optical Data Comparator Using Semiconductor Optical Amplifier 13,” Opt. Laser Technolo-Gy, vol. 43, No. 1, pp. 124–131, 2011.
