Leaching of Metals from Dental Silver Alloy Wastes

محورهای موضوعی : micro and nano mechanics

Razieh Khoshhal ¹ , Hojjat Mirzaei-Ghasabeh ² , Mohammad Asadrokht ³ , Ali Hosseinzadeh ⁴

1 - Department of Materials and Metallurgical Engineering, Birjand University of Technology
2 - School of Metallurgy and Materials Engineering, Iran University of Science and Technology
3 - School of Metallurgy and Materials Engineering, Iran University of Science and Technology
4 - Department of Mechanical Engineering, Ferdowsi University of Mashhad, Iran

تاریخ دریافت : 1400/04/13 تاریخ پذیرش : 1400/07/15 تاریخ انتشار : 1401/03/11

کلید واژه: Dental alloy, leaching, Amalgam, Silver, Recycling,

چکیده مقاله :

Environmental issues of hazardous metal wastes as well as growing demand for metals has increased focus on the forthcoming provision of metals. Therefore, the recovery and recycling processes of precious metals from secondary resources have become more prominent in the last years. Silver is one of the precious metals which can be recovered from wastes such as electronic wastes, coin and medal production losses, photographic films, and dental filling materials known as amalgam, which has the highest silver content. The present paper investigates the acid leaching of metals from a waste sample of dental silver alloy generated during the melt spray process. The alloy constitutes of 42.13% Ag, 31.03% Sn, and 26.84 Cu. The phase composition of amalgam generally consists of Ag2Hg3, Ag3Sn, SnxHg, Cu6Sn5, and Cu3Sn. The effects of the system temperature (25-80°C), nitric acid concentration as the leachate (13.75-65%), pulp density (33-200 g/l), and reaction time (0-240 min) on the dissolution recovery of silver, copper, and tin have been investigated. In the best case, we recovered 100% of silver and 98% of copper as soluble nitrates while tin was isolated as solid stannic oxide.

منابع و مأخذ:

• Yilmaz, E., Erturk, S., Arsalan, C., and Arsalan, F, Recovery of Silver From Dental Amalgam Wastes via Hydrometallurgical Process, presented at the 14th International Mineral Processing Symposium and Exhibition (IMPS 2014), Kuşadası, Turkey, 15-17 October, 2014.


• Lee, C. W., Fung, K. W., Recovery of Silver and Mercury from Dental Amalgam Waste, Resource Recovery and Conservation, Vol. 5, No. 4, 1981, pp. 363-371.


• Thopegowda, N. B., Shenoy, K., Shankarnarayana, R. K., Kukkila, J., Vaddya, S. B., and Gingipalli, K., Recycling of Materials used in Dentistry with Reference to its Economic and Environmental Aspects, International Journal of Health and Rehabilitation Sciences (IJHRS), Vol. 2, No. 3, 2013, pp. 140-145.


• Pereira, H. A. B. D. S., Iano, F. G., Silva, T. L. D., Oliveira, R. C. D., Menezes, M. L. D., and Buzalaf, M. A. R., Recovery of Silver Residues From Dental Amalgam, Journal of Applied Oral Science, Vol. 18, 2010, pp. 121-126.


• Harangi, Z., Kulcsar, T., and Kekesi, T., Hydrometallurgical Processing of Anode Slimes Obtained from the Electrolytic Refining of Soldering Scrap, Materials Science and Engineering (A Publication of the University of Miskolc), Vol. 40, No. 1, 2015, pp. 64-74.


• Huang, W., Shin, W. J., Wang, L., and Tao, M., Recovery of Valuable and Toxic Metals from Crystalline-Si Modules, in 2016 IEEE 43rd Photovoltaic Specialists Conference (PVSC), 2016, pp. 3602-3605.


• Kim, S., Lee, J. C., Lee, K. S., Yoo, K., and Alorro, R. D., Separation of Tin, Silver and Copper from Waste Pb-free Solder Using Hydrochloric Acid Leaching with Hydrogen Peroxide, MATERIALS Transactions, Vol. 55, No. 12, 2014, pp. 1885-1889.


• Yoo, K., et al., Recovery of Sn, Ag and Cu from Waste Pb-Free Solder Using Nitric Acid Leaching, Materials Transactions, Vol. 53, No. 12, 2012, pp. 2175-2180.