Design Construction and Evaluation of a Ring-like Karbandi Structure
محورهای موضوعی :
advanced manufacturing technology
Ahad Shahhoseini
1
,
sajjad pakzad
2
,
Mohammad Mehdi Ranjbar Malek Shahi
3
1 - Faculty of Design, Tabriz Islamic Art University, Iran
2 - Faculty of Design, Tabriz Islamic Art University, Iran
3 - Faculty of Design, Tabriz Islamic Art University, Iran
تاریخ دریافت : 1401/04/25
تاریخ پذیرش : 1401/08/01
تاریخ انتشار : 1401/12/10
کلید واژه:
FEM Analyses,
Iranian Architecture,
Karbandi,
Ring,
structure,
چکیده مقاله :
Due to the gold price increases in the Iranian market, the desired buyers have been attracted to LGJ (Lightweight Gold Jewelry). Meanwhile, because of the strength decreases in structure in LGJ., we investigated a structural solution in this research. The proposed solution was Karbandi as a supporting lattice-ordered structure in Iranian architecture. We used five types of primary Iranian architecture arches and a perfectly logical Karbandi plan to create ring-like structures. Arches and ring-like structures were compared based on maximum mises stress, strain, and weight using FEM analyses. The applied load and approximate area of it in analyses, according to the female mean Tip-pinch and the mean of minimum, thumb, and index finger width were chosen. Based on analyses results, a ring-like Karbandi structure was chosen for construction. The models were constructed in four alloys category based on sterling silver standard with Cu-nanoparticles as an admixture. A practical test was done to investigate the mean deformation time for each alloy's model category. A weight was used to investigate the observable deformation time-based capacity of the models. Results showed that the lowest mises max stress value was observed in the 1st arch, although the 3rd arch had the minimum strain among arches. In ring-like Karbandi structures made from 1st and 3rd arches, the minimum value of mises max stress and strain was related to the Karbandi. In the physical load applying process, the category that did not contain cu-nanoparticles had the highest deformation meantime among all categories.
منابع و مأخذ:
Dastranj, E., Sahebi Fard, H., Abdolbaghi, A., and Reza Hejazi, S., Power Option Pricing Under the Unstable Conditions (Evidence of Power Option Pricing Under Fractional Heston Model in The Iran Gold Market), Physica A: Statistical Mechanics and its Applications, Vol. 537, 2020, pp. 122690, https://doi.org/10.1016/j.physa.2019.122690.
Saradesh, K., Vinodkumar, G., Metallurgical Processes for Hardening of 22karat Gold for Light Weight and High Strength Jewelry Manufacturing, Journal of Materials Research and Technology, Vol. 9, No. 2, 2020, pp. 2009-2020, https://doi.org/10.1016/j.jmrt.2019.12.033.
Pan C, Han Y, Lu J., Design and Optimization of Lattice Structures: A Review, Applied Sciences, Vol. 10, No. 18, 2020, pp. 63-74, https://doi.org/10.3390/app10186374.
Dong, G., Yunlong, T., and Yaoyao F. Zh., A Survey of Modeling of Lattice Structures Fabricated by Additive Manufacturing, Journal of Mechanical Design, Vol. 139, No. 10, 2017, 100906.
Großmann, A., Gosmann, J., and Mittelstedt, C., Lightweight Lattice Structures in Selective Laser Melting: Design, Fabrication and Mechanical Properties, Materials Science and Engineering: A, Vol. 766, 2019, pp. 138356, https://doi.org/10.1016/j.msea.2019.138356.
Pour Ahmadi, M., Sohrabi, M., Design of Persian Karbandi: The Problem of Dividing the Base from a Mathematical Viewpoint, Jria.iust.ac.ir. Vol. 7, 2019, pp. 21-36, Online access, http://jria.iust.ac.ir/article-1-1171-en.html.
Amjad Mohamadi, A., Nejad Ebrahimi, A., and Shahbazi, Y., Geometric Design of a Masonry Lattice Space Dome Titled Karbandi in Persian Architecture, International Journal of Space Structures, Vol. 34, No. 2, 2019, pp. 22-39, https://doi.org/10.1177/0956059919845631.
Koliji, H. Revisiting the Squinch: From Squaring the Circle to Circling the Square, Nexus Netw Journal, Vol. 14, 2012, pp. 291–305, https://doi.org/10.1007/s00004-012-0113-9.
Jazbi, A., Risaaleh Taaq va Ajaz, Soroush Publications, Tehran, Iran, 1987, pp. 27 (Partial Translation of Miftah al-hisab).
Maleki-Gahfarokhi, A., Dianat, I., Feizi, H., and Asghari-Jafarabadi, M., Influences of Gender, Hand Dominance, and Anthropometric Characteristics on Different Types of Pinch Strength: A Partial Least Squares (PLS) Approach, Applied Ergonomics, Vol. 79, 2019, pp. 9-16, https://doi.org/10.1016/j.apergo.2019.04.002.
Klotz, U. E., Tiberto, D., and Held, F., Optimization of 18-Karat Yellow Gold Alloys for The Additive Manufacturing of Jewelry and Watch Parts, Gold Bull, No. 50, 2017, pp. 111–121 https://doi.org/10.1007/s13404-017-0201-4.
Pang, X., Xian, Y., Wang, W., and Zhang, P., Tensile Properties and Strengthening Effects of 6061Al/12 wt%B4C Composites Reinforced with Nano-Al2O3 Particles, Journal of Alloys and Compounds, Vol. 768, 2018, pp. 476-484, https://doi.org/10.1016/j.jallcom.2018.07.072.
Buzurgmehri, Z., Hindisa dar Mimari (Geometry in Persian Architecture), Iranian Cultural Heritage Organization, Tehran, Iran, 1992, pp. 154 (In Farsi).
Marano, G. C., Trentadue, F., and Petrone, F., Optimal Arch Shape Solution Under Static Vertical Loads, Acta Mech, Vol. 225, 2014, pp. 679–686, https://doi.org/10.1007/s00707-013-0985-0.
Guo, Y., Chen, H., Pi, Y., and Bradford, M., In-Plane Strength of Steel Arches with a Sinusoidal Corrugated Web Under a Full-Span Uniform Vertical Load: Experimental and Numerical Investigations, Eng Struct, Vol. 110, 2016, pp.105-115, https://doi.org/10.1016/j.engstruct.2015.11.056.
Marano, G., Trentadue, F., Greco, R., Vanzi, I., and Briseghella, B., Volume/Thrust Optimal Shape Criteria for Arches Under Static Vertical Loads, Journal of Traffic and Transportation Engineering (English Edition), Vol. 5, 2018, pp. 503-509, https://doi.org/10.1016/j.jtte.2018.10.005.
Zampieri, P., Tetougueni, C., Maiorana, E., and Pellegrino, C., Post-Buckling of Network Arch Bridges Subjected to Vertical Loads, Structure and Infrastructure Engineering, Vol. 17, 2020, pp. 941-959, https://doi.org/10.1080/15732479.2020.1778742.
Brandonisio, G., Mele, E., and De Luca, A., Limit Analysis of Masonry Circular Buttressed Arches Under Horizontal Loads, Meccanica, Vol. 52, 2017, pp. 2547-2565, https://doi.org/10.1007/s11012-016-0609-6.
Sensoy, A., Dynamic Relationship Between Precious Metals, Resources Policy, Vol. 38, 2013, pp. 504-511, https://doi.org/10.1016/j.resourpol.2013.08.004.
CATIA, Material Library (Mechanical properties), Dassault Systemes, Package 3, Ver. 5-6, Service Pack 1, 2021.
Addisu, H., Koricho, E., Structural Weight and Stiffness Optimization of a Midibus Using the Reinforcement and Response Surface Optimization (RSO) Method in Static Condition, Modelling and Simulation in Engineering, Vol. 2022, 2022, pp. 1-15, https://doi.org/10.1155/2022/6812744.
Grimwade, M., Introduction to Precious Metals; Metallurgy for Jewelers and Silversmiths, Brynmorgen press, USA, First Edition, 2009, pp. 91-102.
Aarts, W., Jarvis, R., The Change in Resistivity, On Plastic Deformation, Of Silver-Copper and Silver-Gold Alloys, Acta Metallurgica, Vol. 2, No. 1, 1954, pp. 87-91, https://doi.org/1016/0001-6160(54)90098-x.
Gain, A., Zhang, L., The Effects of TiO2 Nanoparticles Addition on The Thermal Shock Resistance, Shear Strength and IMC Layer Growth of SAC305 Alloy, Materialia (Oxf), Vol. 3, 2018, pp. 64-73, https://doi.org/10.1016/j.mtla.2018.10.009
Aliofkhazraei, M., Handbook of Nanoparticles, Springer Cham, 2020, pp. 664-665, https://doi.org/10.1007/978-3-319-13188-7.
Cholewickl, J., Wolf, S., Unit of Measurement: Newton (N) Versus Kilogram Force (kgf), Journal of Hand Surgery, Vol. 23, No. 5, 1998, pp. 952, https://doi.org/10.1016/s0363-5023(98)80181-0.
