Design of Structure for a Heavy Duty Mineral Tow Machine by Evaluating the Dynamic and Static Loads

محورهای موضوعی : Mechanical Engineering

Mehdi Akhondizadeh ¹ , Meysam Atashafrooz ²

1 - Department of Mechanical Engineering, Sirjan University of Technology, Sirjan, Iran
2 - Department of Mechanical Engineering, Sirjan University of Technology, Sirjan, Iran

تاریخ دریافت : 1401/04/16 تاریخ پذیرش : 1401/07/20 تاریخ انتشار : 1401/12/10

کلید واژه: Stress Analysis, Static load, Mechanical design, Tow structure, dynamic load,

چکیده مقاله :

The present manuscript gives the description of findings which took importance during the design and analysis of the structure of heavy duty hauler machine ordered by Gol-e-Gohar iron ore complex in Iran. Stress and deformation analysis was indeed the heart of the project and the key of its success. The challenging problem of evaluation of value and behaviour of active loads was taken under consideration precisely and all participated external forces were included in analysis. Since the present case is a moving structure, the loading evaluation should be included in all critical experienced conditions through the operation. The inertial forces due to acceleration and road bump have the governing role and have been evaluated and considered in analysis. After precise and complete evaluation of external loads and applying the correct boundary conditions, the simulations for stress analysis have been performed in ANSYS. The main findings of the present study were the optimized decision for the geometry of several important load carrying elements and appropriate reinforcement of the risky positions which was the result of the correct knowledge of the mechanics of problem. Finally, the structure was manufactured with the total weight of about 38 ton and load carrying capacity of 120 ton including the dynamic effects. After succeeding in the initial loading, the operational loading in real conditions in mine ramp has been carried out gradually and the machine is currently working in desired predicted form.

منابع و مأخذ:

• Budynas, R. G., Nisbett, J. K., Shigley's Mechanical Engineering Design, New York: McGraw-Hill, Vol. 9, 2011.


• Finger, S., Dixon, J. R., A Review of Research in Mechanical Engineering Design. Part I: Descriptive, Prescriptive, and Computer-Based Models of Design Processes, Research in Engineering Design, Vol. 1, No. 1, 1989, pp. 51-67.


• Ullman, D. G., Toward the Ideal Mechanical Engineering Design Support System, Research in Engineering Design, Vol. 13, No. 2, 2002, pp. 55-64.


• Sapuan, S. M., A Knowledge-Based System for Materials Selection in Mechanical Engineering Design, Materials & Design, Vol. 22, No. 8, 2001, pp. 687-695.


• Si, J. P., Wang, G. S., and Ding, X. L., Analysis of Dump Truck Unloading Condition Based on ANSYS, In Advanced Materials Research, Vol. 548, 2012, pp. 724-729.


• Yi, D., Strength Analysis and Optimization of Tank Truck Based on ANSYS, In Journal of Physics: Conference Series, Vol. 2026, No. 1, 2021, pp. 012058.


• Cao, F., Li, J., and Cui, M., Analysis of Frame Structure of Medium and Small Truck Crane, In AIP Conference Proceedings, Vol. 1944, No. 1, 2018, pp. 020065.


• Startcev, A., Romanov, S., and Vagina, O., Interaction of Elastic Wheel with Bumps of Rectangular Shape. In International Conference on Industrial Engineering, Springer, Cham, 2019, pp. 621-629.


• Desai, R., Guha, A., and Seshu, P., Investigation of Internal Human Body Dynamic Forces Developed During a Vehicle Ride, In the International Conference of IFToMM ITALY, Springer, Cham, 2020, pp. 85-93.


• Goenaga, B., Underwood, S., and Fuentes, L., Effect of Speed Bumps on Pavement Condition, Transportation Research Record, Vol. 2674, No. 9, 2020, pp. 66-82.


• Tengler, S., Warwas, K., An Effective Algorithm of Uneven Road Surface Modeling and Calculating Reaction Forces for a Vehicle Dynamics Simulation, Coatings, Vol. 11, No. 5, 2021, pp. 535.


• Guo, Z., Wu, W., and Yuan, S., Longitudinal-Vertical Dynamics of Wheeled Vehicle under Off-Road Conditions, Vehicle System Dynamics, Vol. 60, No. 2, 2022, pp. 470-490.


• Vini, M. H., Daneshmand, S., Effect of Electrically Assisted Accumulative Roll Bonding (EARB) Process on the Mechanical Properties and Microstructure Evolution of AA5083/Al2O3 Composites, Materials Performance and Characterization, Vol. 8, No. 1, 2019, pp. 594-603.