Effect of MIG Welding Parameters on Mechanical Properties of Dissimilar Weld Joints of AISI 202 and AISI 316 Steels
محورهای موضوعی : advanced manufacturing technologyVenkatratnam Dirisala 1 , KESAVA RAO V.V.S 2
1 - Department of Mechanical Engineering, Sri Mittapalli College of Engineering, Guntur, India
2 - Department of Mechanical Engineering, Andhra University, Visakhapatnam, India
کلید واژه: Dissimilar Welds, AISI 202, Response Surface Method, Steels, AISI 316, MIG Welding,
چکیده مقاله :
In the present work dissimilar joints of AISI 202 and AISI 316steels are produced using Metal Inert Gas (MIG) welding. Welding current, wire feed rate, flow rate of gas and edge included angle are considered as input parameters and tensile strength, Impact strength and Maximum bending load are considered as output responses. Response Surface Method (RSM) is adopted using Central Composite Design (CCD) and 31 experiments were performed for 4 factors and 5 levels. Analysis of Variance (ANOVA) is carried out at 95% confidence level and coefficient of determination (R2) of 0.94 is obtained for all the output responses. Effect of welding parameters on output responses are studied by drawing main effect plots. Dominating parameters are identified using contour plots and surface plots are drawn to find the optimal solution. Optimal weld parameters are identified using Response optimizer.
[1] Ghosh, N., Kumar Pal, P., and Nandi, G., GMAW Dissimilar Welding of AISI 409 Ferritic Stainless Steel to AISI 316L Austenitic Stainless Steel by Using AISI 308 Filler Wire, Engineering Science and Technology, Vol. 20, 2017, pp. 1334-1341.
[2] S., Suresh Kumar, V., Sivaprakasam, V., Mugesh, H., Abdul Rahman, B., Ashok, K., and kumar, V., Optimization of Dissimilar Materials On Stainless Steel (316L) and Mild Steel (IS 2062) in MIG Welding Process, International Journal of Recent Trends in Engineering & Research, Vol. 4, No. 4, 2018, pp. 94-101.
[3] Narayana, A., Srihari, T., Optimization of Weld Bead Geometry in MIG Welding Process Using Response Surface Methodology, International Journal of Science & Technology, Vol. 2, No. 4, 2012, pp. 27-34.
[4] D. Bahar, D., Nawaz Sharif M. D., Shravan Kumar, K., and Reddy, D., Optimisation of MIG Welding Process for Hardness and Strength of Welding Joint Using Grey Relational Analysis, International Journal of Research in Advent Technology, Vol. 6, No. 5, 2018, pp. 893-899.
[5] Sivasakthivel, K., Janarthanan, K., and Rajkumar, R., Optimization of Welding Parameter in MIG Welding by Taguchi Method, International Journal of Advanced Research in Mechanical Engineering & Technology, Vol. 1, No.1, 2015, pp. 36-39.
[6] Ghosh, N., Kumar Pal, P., and Nandi, G., Parametric Optimization of Dissimilar Welding of AISI 409 Ferritic Stainless Steel to AISI 316L Austenitic Stainless Steel by using PCA Method, Journal of Achievements in Material and Manufacturing Engineering, Vol. 75, No. 1, 2016, pp. 24-33.
[7] Shanti Lal Meena, S., Butola, R., Murtaza, Q., Jayantilal, H., and Niranjan, M. S., Metallurgical Investigations of Microstructure and Micro Hardness Across the Various Zones in Synergic MIG Welding of Stainless Steel, Materials Today: Proceedings, Vol. 4, 2017, pp. 8240–8249.
[8] Kumar Maurya, B., Pratap, B., Kumar, A., and Rana, G., Experimental Analysis of Dissimilar Metal Welds of Mild Steel and Stainless Steel, International Research Journal of Engineering and Technology, Vol. 4, No. 5, 2017, pp. 1744-1748.
[9] Varol, F., Investigation of Mechanical Properties of MIG-Brazed 304 Stainless Steel and EN 10292 Galvanized Steel Joints using Different Current Intensity, Special Issue of the 6th International Congress & Exhibition (APMAS2016), Acta Physica Polonica A,Vol. 131, No. 1, 2016, pp. 34-35.
[10] Kalacska, E., Majlinger, K., Reka Fabian, E., and Spena, R., Pasquale, MIG Welding of Dissimilar Advanced High Strength Stee Sheets, Materials Science Forum, Vol. 885, 2017, pp 80-85.
