Numerical Simulation of 2-D Incompressible Flow in Micro Semi-circular Cavity by LBM
محورهای موضوعی : Mechanical EngineeringMina Alafzadeh 1 , Shahram Talebi 2
1 -
2 -
کلید واژه:
چکیده مقاله :
Abstract: Since the field of micro electromechanical systems (MEMS) continues to grow, the flow in micro devices have become an area that receives a significant attention. The microscopic flows are usually characterized by the Knudsen number (Kn). When the characteristic size of the particle decreases down to a value comparable to the mean free path of the molecules, the continuum assumption fails and the Navier-Stokes equations with no-slip boundary conditions cannot be applied, so the numerical method which is not based on continuity of the flow is needed. Recently the lattice Boltzmann method (LBM) has received considerable attention by fluid dynamic researches. The LBM is based on the lattice Boltzmann equation with Bhatnagar-Groos-Krook (BGK) collision approximation. In this paper the incompressible laminar flow in a 2D micro semi-circular cavity with lid driven is simulated by LBM. It should be mentioned that the flow in semi-circular cavity in macro scale has been simulated too and the obtained results were found to be in good agreement with those given from the finite volume method. In the present work, the computational results showed that the slip could have influence on the center of vortex and moved it in horizontal and vertical direction in semi-circular cavity. Computing the friction coefficient on the lid driven presented that the friction coefficient was increased as Kn was increased. The slip could affect on the maximum velocity in cavity too and decreased it.
