Numerical Investigation of Laser Bending of Perforated Sheets
محورهای موضوعی : Mechanical Engineering
Mehdi Safari
1
(Department of Mechanical Engineering, Arak University of Technology)
Mehdi Ebrahimi
2
(Department of Mecanical Engineering,
Khomein Branch, Islamic Azad University, khomein, Iran)
کلید واژه: Perforated sheets, Laser bending, Bending angle,
چکیده مقاله :
In this work, laser bending of perforated sheets has been investigated numerically. Laser bending of perforated sheets is more complicated than non-perforated sheets due to their complex geometries. In this paper, laser bending of perforated sheets is studied numerically in the form of thermo-mechanical analysis with ABAQUS/IMPLICIT code. For this purpose, the effects of process and sheet parameters such as laser output power, laser scanning speed, laser beam diameter and the number of punches in the sheet are investigated on the bending angle of laser formed perforated sheet. The results show that the larger punch diameters lead to decrease in bending angle in the laser formed perforated sheets. Also, it is concluded that the bending angle of the perforated sheet is decreased with increasing laser scanning speed. In addition, bending angle is decreased with decreasing laser beam diameter.
[1] Chen, D. J., Xiang, Y. B., Wu, S. C., and Li, M. Q., “Application of fuzzy neural network to laser bending to process of sheet metal”, Materials Science and Technology, Vol. 18, No. 2, 2002, pp. 677–680.
[2] Shen, H., Yao, Z. Q., Shi, Y. J., and Hu, J., “The simulation of temperature field in the laser forming of steel plates”, International Journal of Modeling, Identification and Controlling, Vol. 2, No. 3, 2007, pp. 241–249.
[3] Vollertsen, F., Geiger, M., and Li, W. M., “FDM and FEM simulation of laser forming: a comparative study”, in: Advanced Technology of Plasticity, Proceedings of the Fourth International Conference on Technology of Plasticity, 1993, pp. 1793–1798.
[4] Alberti, N., Fratini, L., and Micari, F., “Numerical simulation of the laser bending process by a coupled thermal mechanical analysis”, in: Laser Assisted Net Shape Engineering, Proceedings of the LANE, Vol. 1, 1994, pp. 327–336.
[5] Alberti, N., Fratini, L., Micari, F., Cantello, M., and Savant, G., “Computer aided engineering of a laser assisted bending processes”, in: Laser Assisted Net Shape Engineering 2, Proceedings of the LANE, Vol. 2, 1997, pp. 375–382.
[6] Hsiao, Y. C., Shimizu, H., Firth, L., Maher, W., and Masabuchi, K., “Finite element modelling of laser forming”, in: Proceedings of the International Congress on Applications of Lasers and Electro-optics (ICALEO’97), Section A, 1997, pp. 31–40.
[7] Holzer, H., Arnet, M., and Geiger, M., “Physical and numerical modelling of the buckling mechanism”, in: Laser Assisted Net Shape Engineering, Proceedings of the LANE, Vol. 1, 1994, pp. 379–386.
[8] Li, W. C., Yao, Y. L., “Numerical and experimental investigation of convex laser forming process”, Journal of Manufacturing Processes, Vol. 3, No. 2, 2001, pp. 73–81.
[9] Hu, Z., Kovacevic, R., and Labudovic, M., “Experimental and numerical modelling of buckling instability of laser sheet forming”, International Journal of Machine Tools and Manufacture, Vol. 42, No. 13, 2002, pp. 1427–1439.
[10] Magee, J., Watkins, K. G., Steen, W. M., Calder, N., Sidhu, J., and Kirby, J., “Edge effects in laser forming”, in: Laser Assisted Net Shape Engineering 2, Proceedings of the LANE, Vol. 2, 1997, pp. 399-408.
[11] Bao, J. C., Yao, Y. L., “Analysis and prediction of edge effects in laser bending”, Journal of Manufacturing Science and Engineering, Transactions of the ASME, Vol. 123, 2001, pp. 53-61.
[12] Shen, H., Zhou, J., Shi, Y. J., Yao, Z. Q., and Hu, J., “Varying velocity scan in laser forming of plates”, Materials Science and Technology, Vol. 23, No. 4, 2007, pp. 483-486.
[13] Shen, H., Yao, Z. Q., “Analysis of varying velocity scanning schemes on bending angle in laser forming”, in: International Workshop on Thermal Forming and Welding Distortion, 2008, pp. 215-227.
[14] Safrai, M., Farzin, M., “Experimental and numerical investigation of laser bending of tailor machined blanks”, Optics & Laser Technology, Vol. 48, 2013, pp. 513-522.
[15] Safari, M., Farzin, M., and Ghaei, A., “Investigation into the effects of process parameters on bending angle in the laser bending of tailor machined blanks based on a statistical analysis”, Journal of Laser Applications, Vol. 5, No. 5, 2013, pp. 052001, 1-10.
[16] Safari, M., Farzin, M., “A study on laser bending of tailor machined blanks with variousirradiating schemes”, Journal of Materials Processing Technology, Vol. 214, 2014, pp. 112-122.
[17] Shen, H., Shi, Y., and Yao, Zh., “Numerical simulation of the laser forming of plates using two simultaneous scans”, Computational Materials Science, Vol. 37, 2006, pp. 239-245.
