Modelling of Non-Uniform Piezoelectric Micro-Cantilever in Different Environments
محورهای موضوعی : Mechanical EngineeringMitra Taghizade 1 , A. H. Korayem 2 , M. H. Korayem 3
1 - School of Mechanical Engineering, Robotic Research Laboratory,
Iran University of Science and Technology
2 - School of Mechanical Engineering, Robotic Research Laboratory,
Iran University of Science and Technology, Tehran, Iran
3 - School of Mechanical Engineering, Robotic Research Laboratory,
Iran University of Science and Technology, Tehran, Iran
کلید واژه: Timoshenko Beam Theory, Piezoelectric MC, Efast Method, Finite Element Method, Different Environments,
چکیده مقاله :
In recent years, Atomic Force Microscopy (AFM) has been known as a powerful and efficient tool for surface imaging in different environment. To enhance image quality and more precise prediction of Micro-cantilever (MC) behaviour, accuracy in the MC modeling and simulation and detecting the MC sensitivity to geometric parameters has great importance. To model the vibration motion of the AFM non-uniform piezoelectric MC, Timoshenko beam theory is used in order to consider the effect of shear effect in air and liquid environment. In addition, the effect of the forces imposed by the ambient and sample surface is considered. Frequency response has been studied in the air and different liquid environments and the obtained results have been compared with experiential results as well as with results obtained from Euler-Bernoulli beam theory that is reflective of higher precision exercised in the modeling in respect to Euler-Bernoulli beam theory. Efast statistical method, which is found efficient and quick in the survey of linear and nonlinear models and takes the inter-parameter coupling effect into consideration besides calculating the sensitivities unique to each of the factors, has been applied in order to analyse the geometrical parameters’ effects on the MC natural frequencies in the air and water environments.
[1] Tortonese, M., Yamada, H., Barrett, R. C., and Quate, C. F., “Atomic Force Microscopy Using a Piezoresistive Cantilever”, Solid-State Sensors and Actuators, Vol. 44, 1991, pp. 448–451.
[2] Mahmoodi, S. N., Jalili, N., “Non-Linear Vibrations and Frequency Response Analysis of Piezoelectrically Driven Microcantilevers”, Int. J. Non. Linear. Mech, Vol. 42, 2007, pp. 577–587.
[3] Wolf, K., Gottlieb, O., “Nonlinear Dynamics of a Noncontacting Atomic Force Microscope Cantilever Actuated by a Piezoelectric Layer”, J. Appl. Phys, Vol. 91, 2002, pp. 701-720.
[4] Sokmen, U., Stranz, A., Waag, A., Ababneh, A., Seidel, H., Schmid, U., and Peiner, E., “Evaluation of Resonating Si Cantilevers Sputter-Deposited with AIN Piezoelectric thin Films for Mass Sensing Applications”, J. micromechanics and microengineering, Vol. 20, 2010, pp. 4701-4720.
[5] Mahmoodi, S. N., Daqaq, M. F., and Jalili, N., “On the Nonlinear-Flexural Response of Piezoelectrically Driven Microcantilever Sensors”, Sensors Actuators A Phys, Vol. 153, 2009, pp. 171–179.
[6] Song, Y., Bhushan, B., “Finite-Element Vibration Analysis of Tapping-Mode Atomic Force Microscopy in Liquid”, Ultramicroscopy, Vol. 107, 2007, pp. 1095–1104.
[7] Vazquez, J., Rivera, M. A., Hernando, J., and Sanchez-Rojas, J. L., “Dynamic Response of Low Aspect Ratio Piezoelectric Microcantilevers Actuated in Different Liquid Environments”, J. Micromechanics Microengineering, Vol. 19, 2008. pp. 15020-15040.
[8] Naik, T., Longmire, E. K., and Mantell, S. C., “Dynamic Response of a Cantilever in Liquid Near a Solid Wall”, Sensors Actuators A Phys, Vol. 102, 2003, pp. 240–254.
[9] Razzazade, S., “Vibration Analysis of Multi -Layered Piezoelectric Microcantilever of AFM in Amplitude Mode in Air”, Iran University of Science and Technology, 2013.
[10] Lee, H. L., Chang, W.J., “Sensitivity Analysis of a Cracked Atomic Force Microscope Cantilever”, 2012, pp. 34-56.
[11] Farokh Payam, A., “Sensitivity of Flexural Vibration Mode of the Rectangular Atomic Force Microscope Micro Cantilevers in Liquid to the Surface Stiffness Variations”, Ultramicroscopy, Vol. 135, 2013, pp. 84–88.
[12] Korayem, M. H., Ghaderi, R., “Nonlinear Flexural Vibration of AFM Multi-Layered Piezoelectric Microcantilever Under Tip-Sample Interaction”, J. Lat. Am. Appl. Res, Vol. 43, 2013, pp. 87–94.
[13] Kucera, M., Manzaneque, T., Sanchez, J. L., Bittner, A., and Schemid., “Q-Factor Enhancement for Self Actuated Self-sensing Piezoelectric MEMS Resonators Applying a Lock in Driven Feedback Loop”, J. micromechanics and microengineering, Vol. 23, 2013, pp. 187–194.
[14] Ansari, R., Ashrafi, M. A., Hosseinzadeh, S., and Firouznia, Z., “Vibration of Piezoelectric Nanowires Including Surface Effects,” J. Nanostructures, Vol. 4, 2014, pp. 167–176.
[15] Taghizade, M., “Sensitivity Analysis of an AFM Piezoelectric Micro-Beam Vibration by FEM in Various Environments in the Tapping”, Iran University of Science and Technology, 2016.
[16] Riesch, C., Reichel, E. K., Keplinger, F., and Jakoby, B., “Characterizing Vibrating Cantilevers for Liquid Viscosity and Density Sensing”, J. Sensors, 2008, pp. 57-89.
[17] Hosaka, H., Itao, K., and Kuroda, S., “Damping Characteristics of Beam-Shaped Micro-Oscillators”, Sensors Actuators A Phys, Vol. 49, 1995, pp. 87–95.
[18] Lin, Y., “Vibration Analysis of Timoshenko Beams Traversed by Moving Loads”, Journal of Marine Science and Technology, Vol. 2, 1994, pp. 25–35.
[19] Korayem, A. H., Korayem, M. H., and Ghaderi, R., “Vibrational Analysis of Single-Layered Piezoelectric AFM Microcantilever in Amplitude Mode by Considering the Capillary Force”, Eur. Phys. J. Appl. Phys, Vol. 68, 2014, pp. 30402-30422.
[20] Korayem, A. H., Korayem, M. H., and Ghaderi, R., “FEM Analysis of the Vibrational Motion of Oblique Piezoelectric Microcantilever in the Vicinity of a Sample Surface in Liquid”, Precis. Eng, Vol. 42, 2015, pp. 208–217.
[21] Cukier, R. I., Levine, H. B., and Shuler, K. E., “Nonlinear Sensitivity Analysis of Multiparameter Model Systemsˮ, Journal of computational physics, Vol. 26, 1978, pp.1-42.
