Qualification of Propeller by Experimental and Analytical Methods

محورهای موضوعی : Mechanical Engineering

K. Siva Prasad ¹ (Department of Mechanical Engineering, Anil Neerukonda Institute of Technology & Sciences, India)
S. Murthy Bellala ² (Department of Mechanical Engineering, Anil Neerukonda Institute of Technology & Sciences, India)

تاریخ دریافت : 1396/10/29 تاریخ پذیرش : 1397/03/20 تاریخ انتشار : 1397/12/10

کلید واژه: Impact Hammer Test, Cantilever Bend Test, Propeller, ANSYS,

چکیده مقاله :

The paper focuses on static and dynamic analysis of propeller blade made of Aluminium-24345 material. The solid model of propeller blade and propeller are developed in CATIA V5 R20. By using this model, propeller blade was manufactured using 3-Axis CNC milling machine by adopting MASTERCAM software. Qualification tests were carried out on the propeller blade of an underwater vehicle for their strength and vibration. Impact Hammer Method is employed to measure the vibration-damping properties of Propeller blade. Computational Fluid Dynamics (CFD) analysis is carried out to analyze the contours of static pressure on the 5-Blade propeller and the forces, moments acting on the propeller. Finite element analysis (FEA) of the blade was carried in ANSYS 15.0. Static, modal, harmonic analysis was carried out on analysis software for the modeled propeller blade and Factor of Safety was determined to qualify the propeller.Deformation of the propeller blade is measured using Coordinate Measuring Machine (CMM).

منابع و مأخذ:

[1]     Pavan Kishore, M. L., Behera, R. K., Pradhan, S. K., Parida and P. K., Effect of Material Behavior on Dynamic Characteristics Determination of Marine Propeller Blade using Finite Element Analysis, Procedia Engineering, Vol. 144, 2016, pp. 767 – 774.

[2]     Dubbioso, G., Muscari, R. and Di Mascio, A., Analysis of a Marine Propeller Operating in Oblique Flow, Elsevier- Computers & Fluids, Vol. 92, No.1, 2014, pp. 56–81.

[3]     Haimov, H., Gallego, V., Enrique Molinelli and Borja, T., Propeller Acoustic Measurements in Atmospheric Towing Tank, Ocean Engineering, Vol. 120, 2015, pp. 190-201.

[4]     Fang wen, H., Shi tang, D., Numerical Analysis for Circulation Distribution of Propeller Blade, Journal of Hydrodynamics Vol. 22, No. 4, 2010, pp. 488-493.

[5]     Sebastian Kowalczyk, A., JudytaFelicjancik, N., Numerical and Experimental Propeller Noise Investigations, Ocean Engineering., Vol.120, 2016, pp.108-115.

[6]     Kaidi, S., Smaoui1, H. and Sergent, P., Numerical Estimation of Bank-Propeller-Hull Interaction Effect on Ship Manoeu- Vring using CFD Method, Journal of Hydrodynamics, Vol. 29, No.1, 2017, pp.154-167.

[7]      Yao, J., Investigation on Hydrodynamic Performance of a Marine Propeller in Oblique Flow by RANS Computations, Ocean Engineering., Vol. 7, 2015, pp. 56-69.

[8]     Cansın Özdena, M., Gürkana, A. Y., Arıkan Özdenb, Y., Canyurta, T. G. and Korkuta, E., Underwater Radiated Noise Prediction for a Submarine Propeller in Different Flow Conditions, Ocean Engineering., Vol.126, 2016, pp.488-500.

[9]     Usha, Y., sateesh, B. and Murthy, B. S. R., Modelling and Analysis of Five Blade Ship Propeller, International Journal of Mechanical Engineering and Materials Sciences (IJMEMS), Vol.7, No.1, 2014, pp. 77-81.

[10]  Jalali, H., Ahmadian, H., Model Identification and Dynamic Analysis of Ship Propulsion Shaft Lines, Journal of Theoretical and Applied Vibration and Acoustics, Vol. 1, No. 2, pp. 85-95.

[11]  Uppalapati, S., Raghavulu K. V. and Kumar Singam, K., Design and Analysis of Propeller Blade Using CATIA & ANSYS Software, International Journal of Management, Information Technology and Engineering, Vol. 4, No. 4, 2016, pp. 83-96.

[12]  Seetharama Rao, Y., Sridhar Reddy, B., Harmonic Analysis of Composite Propeller for Marine Applications, International Journal of Research in Engineering and Technology, Vol.1, No.3, 2012, pp. 257-260.

[13]  Bhanu Priya, M., Mohan Krishna, K. and Giribabu, P., Design and Analysis of a Propeller Blade, IRJET, 2015, pp. 1198-1202.

[14]  Burrill, L. C., Marine Propellers and Propulsion, Chapter 19.

[15]  Burrill, L. C., Marine Propellers and Propulsion, Chapter 21.

[16]  Pavan Kishore, M. L., Behera, R. K. and Harsha Vardhan, D., Free Vibration Analysis of Four Bladed Propeller using Different Materials, Proceedings of 4th SARC International Conference, 30th March-2014.

[17]  Pavan Kishore, M. L., Behera, R. K., Sreenivasulu Bezawada, Structural Analysis of NAB Propeller Replaced with Composite Material, International Journal of Modern Engineering Research (IJMER), Vol. 3, No.1, 2013, pp. 401-405.

[18]  Chittaranjan Kumar Reddy, T., Nagaraja Rao, K., Design and Simulation of a Marine Propeller, International Journal of Research in Advanced Engineering Technologies, Vol. 5, No. 1, 2015, pp. 111-128.

[19]  Ristea, M., Popa, A. and Ionut Neagu, D., CFD Modelling of a 5 Bladed Propeller by Using the RANSE Approach, Naval Academy Scientific Bulletin, Vol. XVIII, No. 2, 2015.

[20]  Colley, E., Analysis of Flow Around a Ship Propeller using OpenFOAM, Curtin University, October, 2012.

[21]  Samad, Z., Abdullah, A. B., Khaleed, H. M. T., Abu-Bakar M. H. and Arshad, M. R., A Novel Manufacturing Method of Propeller for Autonomous Underwater Vehicle (auv) using Cold Forging Process, Indian Journal of Geo Marine Sciences, Vol. 41, No. 3, 2012, pp. 242-248.

[22]  Chen, F., Liu, L., Lan, X., Li, Q., Leng, J. and Liu, Y., The Study on the Morphing Composite Propeller for Marine Vehicle. Part I: Design and Numerical Analysi, Composite Structures, Vol. 168, 2017, pp. 746-757.

[23]  Aktas, B., Atlar, M., Turkmen, S., Shi, W., Sampson, R., Korkut, E. and Fitzsimmons, P., Propeller Cavitation Noise Investigations of a Research Vessel using Medium Size Cavitation Tunnel Tests and Full-Scale Trials, Ocean Engineering, Vol.120, 2016, pp.122-135.

[24]  Abbas, N., Kornev, N., Shevchuk, I. and Anschau, P., CFD Prediction of Unsteady Forces on Marine Propellers Caused by the Wake Non-Uniformity and Non-Stationarity, Ocean Engineering, Vol. 104, 2015, pp. 659–672.

[25]  Majumder, P., Pandey, K. M. and Deshpand, N. V., Design and Analysis of a Propeller Blade for Underwater Vehicle, Journal of Material Science and Mechanical Engineering (JMSME), Vol. 3, No. 2, 2016, pp. 105-110.