Impact of Southern Window-to-Floor Area Ratios on the Thermal Performance of the Settlement in the Hot and Dry Climate (Case Study: Kashan City)
محورهای موضوعی : Architecture
mohamadali karbasfuroosha
1
(
Ph.D Candidate, Department of Architecture, Pardis Branch, Islamic Azad University, Tehran, Iran
)
Fereshteh Habib
2
(
Assistant Professor, Department of Architecture, Pardis Branch, Islamic Azad University, Tehran, Iran
)
Hossein Zabihi
3
(
Associate professor in Urban Planning, Department of Art and Architecture, Science and Research Branch, Islamic Azad University, Tehran, Iran
)
کلید واژه: Southern Windows, Kashan, Hot and dry climate, Thermal performance,
چکیده مقاله :
A major party of generated energy is now used for heating and cooling buildings. Hence, it is beneficial to apply solutions that reduce the thermal load of buildings. However, solutions for energy consumption reduction always face barriers. Optimizing window proportions in energy consumption saving is highly influential in this case. The window is one of the main components that receives solar radiation energy but also serves as a thermal bridge transmitting energy from interior to exterior space. This study investigates the climate conditions of Kashan. It determines materials as constant variables to examine the impact of southern window-to-floor area ratios on the thermal performance of settlements in hot and dry climates to achieve higher efficiency of this element using simulation of different models through EnergyPlus software. This study then examines the cooling and heating load created in interior space considering variable elements of ratios, window elongation, and window-to-floor ratio, using single and double-glazed glass and its analysis considering meteorological data of this city using EnergyPLus software. Finally, the most optimum southern window-to-floor ratio was determined. This study aims to achieve efficiency and the highest impact of the southern side's window of a building on the thermal performance of the building by simulating various models through EnergyPlus software. This study has used the descriptive-analytical method, then analyzed the obtained results, and lastly outlined the priority of application among models as follows:1.38 ratio, 1 ratio, and 1.95 ratio. In contrast, the most optimum window ratio is a 15% window-to-floor ratio with 1.38 proportions and eastern and western elongation using double-glazed glass.
A major party of generated energy is now used for heating and cooling buildings. Hence, it is beneficial to apply solutions that reduce the thermal load of buildings. However, solutions for energy consumption reduction always face barriers. Optimizing window proportions in energy consumption saving is highly influential in this case. The window is one of the main components that receives solar radiation energy but also serves as a thermal bridge transmitting energy from interior to exterior space. This study investigates the climate conditions of Kashan. It determines materials as constant variables to examine the impact of southern window-to-floor area ratios on the thermal performance of settlements in hot and dry climates to achieve higher efficiency of this element using simulation of different models through EnergyPlus software. This study then examines the cooling and heating load created in interior space considering variable elements of ratios, window elongation, and window-to-floor ratio, using single and double-glazed glass and its analysis considering meteorological data of this city using EnergyPLus software. Finally, the most optimum southern window-to-floor ratio was determined. This study aims to achieve efficiency and the highest impact of the southern side's window of a building on the thermal performance of the building by simulating various models through EnergyPlus software. This study has used the descriptive-analytical method, then analyzed the obtained results, and lastly outlined the priority of application among models as follows:1.38 ratio, 1 ratio, and 1.95 ratio. In contrast, the most optimum window ratio is a 15% window-to-floor ratio with 1.38 proportions and eastern and western elongation using double-glazed glass.
Acosta, I., Campano, M., and Molina, J. (2016). Relationship between window-to-floor area ratio and single-point daylight factor in varied residential rooms in Malaysia. Indian Journal of Science and Technology, 9(33), 1–8.
Ahadi, A.; Msoudi-Nejad, M. & Piryaei, A. (2016). Proper design of windows to achieve appropriate daylight at apartment buildings in the city of Tehran, Journal of Hoviat-e-Shahr, 10(1), 41-50.
Chwieduk, D., Bogdanska, B. (2004). Some recommendations for inclinations and orientations of building elements under solar radiation in Polish conditions, Renewable Energy, 29, 1569-1581.
Ebrahimpour, A, & Mohammadkari, B. (2011). New method for designing windows based on energy consumption, Journal of Teacher Mechanical Engineering, 11(1), 77-88
Faizi, F., Noorani, M., Ghaedi, A. & Mahdavinejad, M., (2011). Design an optimum pattern of orientation in residential complexes by analyzing the level of energy consumption; Case study: Maskan Mehr complexes, Procidia Engineering, 21, 1179-1187.
Fayaz, R. (2012). Optimal window level of residential buildings in Ardabil and Tehran. Journal of Architecture and Urban Planning, 5(10), 105–119.
Hamdani, M., Bekkouche, S.M.A., Benouaz, T., Cherier, M.K., (2012): "Study and effect of orientation two-room of buildings located in Ghardaia, Algeria," Energy Procedia, 18, 632-639.
Heirani pour, M.; Fayaz, R. & Mahdavinia, M. (2021). Optimization of window dimensions according to light and heat factors in cold climate residential buildings case study: Ilam city", Journal of Architecture, Urban Design & Urban Planning. 14(35),85-95.
IranianNationalBuildingRegulations. (2015). Nineteenth, Energy Saving
Kokabi, A. (2007). Evaluation of urban quality of life indicators in central areas, Hoviat-e-Shahr journal, 1(1), 75-86 .
Lashgari, H.; Mozermi, S.; Salaki, H. & Lotfi, K. (2011). Optimizing building direction for the city of Ahvaz using climatic conditions, Quarterly of Natural Geography, 4(12): 45-62
Lee, J.W., Jung, H.J., Park, J.Y., Lee, J.B., Yoon, Y. (2013). Optimization of building window system in Asian regions by analyzing solar heat gain and daylighting elements, Renewable Energy, 50, 522-531.
Montaser Kouhsari, A. (2014). Optimal dimensions of windows from the perspective of heat and light in residential buildings of temperate and humid climates. Master's thesis, Tehran University of Arts.
Parsa, MA. (2011). Origins of the architecture of windows; a search for the concept of windows in Persian language and culture, Housing and Rural Environment, 30(134): 75-94.
Poormohammadi, M.R. (2000). Tehran's housing planning, Tehran: SAMT.
Pournaseri, Sh. (2012). Modeling the effects of structural variables of windows to achieve a disrobed window pattern from the view of junior school students of Tehran. Doctoral dissertation, University of Science and Industry.
One building (2022). World Meteorological Organization designation. Retrieved from: https://climate.onebuilding.org/
Sadeghi Ravesh, M.H., & Tabatabaei, S.M. (2009). Determination of Limit of Thermal Comfort in Arid Climate (Case Study: Yazd City). Hoviat-e-Shahr, 3(4), 39-46.
Sharifah Fairuz, SF., Adel, A., and Wan Mariah Maulin, W. (2013). The impact of varied orientation and wall window ratio (www) to daylight distribution in residential rooms. In International Symposium in Developing Economies: Commonalities Among, Diversities, 478–486.
Tahbaz, M. (2018). Architectural Design, Tehran: University of Shahid Beheshti.
Zabihi, H.; Habib, F. & Rahbari-Manesh, K. (2011). Investigating the relationship between satisfaction with residential complexes and the effects of residential complexes on human relations, journal of Hoviat-e-Shahr, 5(8), 103-118.
Tyson, G. A., Lambert, G. & Beattie, L. (2002). The Impact of Ward Design on the Behaviour Occupational Satisfaction and Well-Being of Psychiatric Nurses. International Journal of Mental Health Nursing, 11(2), 94-102.
