Optimization of the Direction and Number of Atrium Openings in a Centralized Model for Improving Thermal Comfort in Office Buildings in Hot and Dry Climates (Case Study of Yazd City)
محورهای موضوعی :Parisa Javid 1 , Niloufar Nikghadam 2 , Alireza karimpour 3 , Jaleh Sabernejad 4
1 - Department of Architecture, S.T.C, Islamic Azad University, Tehran, Iran.
2 - Department of Architecture, S.T.C, Islamic Azad University, Tehran, Iran
3 - Department of Architecture, S.T.C, Islamic Azad University, Tehran, Iran.
4 - Department of Architecture, S.T.C, Islamic Azad University, Tehran, Iran
کلید واژه: Opening orientation, number of openings, central atrium, thermal comfort, hot and dry climate, Yazd city.,
چکیده مقاله :
Passive design strategies such as central atriums have emerged as effective solutions to reduce heat load and improve thermal comfort in hot and dry climates such as Yazd due to increasing concerns about climate change. This study examines the impact of various atrium opening configurations on thermal comfort and energy consumption in Yazd. It aims to determine the optimal combinations of openings to enhance year-round comfort, particularly during the challenging summer months. The study utilizes the PMV (Predicted Mean Vote) and PPD (Predicted Percentage of Dissatisfied) indices to assess climatic performance, which is modeled using the Grasshopper plugin and the Honeybee and Ladybug algorithms. Results indicate that the optimal atrium design involves positioning openings in an eastern orientation, with a PMV of 2.218. This significantly reduces summer heat load and improves comfort during milder seasons. Additionally, combinations of eastern with southern or northern openings were also identified as effective, as they reduced internal heat gain during summer while maintaining comfortable conditions during spring and autumn months. The findings highlight that in summer, the East orientation provides the highest thermal comfort, followed by the East-North-South orientation with a PMV of 2.207. The East-North-West orientation provides satisfactory performance in both spring and summer, but not as effectively as the East-North-South orientation. This research highlights the importance of optimizing atrium opening configurations to reduce reliance on mechanical systems and enhance energy efficiency. This is particularly in climates with extreme summer temperatures, such as Yazd.
Passive design strategies such as central atriums have emerged as effective solutions to reduce heat load and improve thermal comfort in hot and dry climates such as Yazd due to increasing concerns about climate change. This study examines the impact of various atrium opening configurations on thermal comfort and energy consumption in Yazd. It aims to determine the optimal combinations of openings to enhance year-round comfort, particularly during the challenging summer months. The study utilizes the PMV (Predicted Mean Vote) and PPD (Predicted Percentage of Dissatisfied) indices to assess climatic performance, which is modeled using the Grasshopper plugin and the Honeybee and Ladybug algorithms. Results indicate that the optimal atrium design involves positioning openings in an eastern orientation, with a PMV of 2.218. This significantly reduces summer heat load and improves comfort during milder seasons. Additionally, combinations of eastern with southern or northern openings were also identified as effective, as they reduced internal heat gain during summer while maintaining comfortable conditions during spring and autumn months. The findings highlight that in summer, the East orientation provides the highest thermal comfort, followed by the East-North-South orientation with a PMV of 2.207. The East-North-West orientation provides satisfactory performance in both spring and summer, but not as effectively as the East-North-South orientation. This research highlights the importance of optimizing atrium opening configurations to reduce reliance on mechanical systems and enhance energy efficiency. This is particularly in climates with extreme summer temperatures, such as Yazd.
Abdullah, A. H., Meng, Q., Zhao, L., & Wang, F. (2009). Field study on indoor thermal environment in an atrium in tropical climates. Building and Environment, 44(2), 431-436. https://doi.org/https://doi.org/10.1016/j.buildenv.2008.02.011
Acred, A., & Hunt, G. R. (2014). A simplified mathematical approach for modelling stack ventilation in multi-compartment buildings. Building and Environment, 71, 121-130. https://doi.org/https://doi.org/10.1016/j.buildenv.2013.09.004
Aldawoud, A. (2013). The influence of the atrium geometry on the building energy performance. Energy and Buildings. https://www.sciencedirect.com/science/article/pii/S0378778812005543
Aram, R., & Alibaba, H. (2019). Thermal comfort and energy performance of atrium in Mediterranean climate. mdpi.com. https://www.mdpi.com/2071-1050/11/4/1213
Ashdown, I., Bedocs, L., Carroll, W., de Boer, J., Dehoff, P., Donn, M., Erhorn, H., Escaffre, L., Fontoynont, M., & Greenup, P. (2006). CIE 171:2006 Test Cases to Assess the Accuracy of Lighting Computer Programs.
ASHRAE. (2017). Thermal Environmental Conditions for Human Occupancy. American Society of Heating, Refrigerating and Air-Conditioning Engineers.
Ayala, P., Cantizano, A., Gutiérrez-Montes, C., & Rein, G. (2013). Influence of atrium roof geometries on the numerical predictions of fire tests under natural ventilation conditions. Energy and Buildings, 65, 382-390. https://doi.org/https://doi.org/10.1016/j.enbuild.2013.06.010
Barsim, M. M., A., B. M., M., E.-B. H., A., R. Y., & and Sherif, M. M. (2020). Numerical simulation of an experimental atrium fires in combined natural and forced ventilation by CFD. International Journal of Ventilation, 19(1), 1-24. https://doi.org/10.1080/14733315.2018.1524196
Cheung, T., Schiavon, S., Parkinson, T., Li, P., & Brager, G. (2019). Analysis of the accuracy on PMV – PPD model using the ASHRAE Global Thermal Comfort Database II. Building and Environment, 153, 205-217. https://doi.org/https://doi.org/10.1016/j.buildenv.2019.01.055
De Vecchi, R., Sorgato, M. J., Pacheco, M., Cândido, C., & Lamberts, R. (2015). ASHRAE 55 adaptive model application in hot and humid climates: the Brazilian case. Archit. Sci. Rev., 58(1), 93-101. https://doi.org/10.1080/00038628.2014.981145
Fereidoni, S., Fereidooni, L., Tamjid Shabestari, S., Esmaeili, M. S., Zare, M., & Kasaeian, A. (2025). Application of solar chimneys and hybrid solar chimneys for ventilation in buildings: A review. Solar Energy, 288, 113246. https://doi.org/https://doi.org/10.1016/j.solener.2025.113246
Gong, J. (2019). Buoyancy-driven natural ventilation in one storey connected with an atrium. International Journal of Ventilation, 18(4), 281-302. https://doi.org/10.1080/14733315.2018.1524195
Guan, Z., Xu, X., Xue, Y., & Wang, C. (2022). Multi-objective optimization design of geometric parameters of atrium in nZEB based on energy consumption, carbon emission and cost. mdpi.com. https://www.mdpi.com/2071-1050/15/1/147
Heydari, M., Ghanbaran, A., & ... (2024). The effect of atrium configurations on energy usage and natural ventilation in high-rise office buildings in Tehran climate. International Journal of …. https://doi.org/10.1080/14733315.2023.2187536
Holford, J. M., & Hunt, G. R. (2003). Fundamental atrium design for natural ventilation. Building and Environment, 38(3), 409-426. https://doi.org/https://doi.org/10.1016/S0360-1323(02)00019-7
Hussain, S., & Oosthuizen, P. H. (2012). Validation of numerical modeling of conditions in an atrium space with a hybrid ventilation system. Building and Environment, 52, 152-161. https://doi.org/https://doi.org/10.1016/j.buildenv.2011.12.016
Jin, Z., Zhang, Y., Sun, H., Han, M., Zheng, Y., Zhao, Y., & ... (2024). Indoor thermal nonuniformity of atrium-centered public building: Monitoring and diagnosis for energy saving. Elsevier. https://www.sciencedirect.com/science/article/pii/S2214157X24000893
Kaihoul, A., Pitzalis, E., Sriti, L., Turi, S. D., & ... (2024). Enhancing thermal comfort assessment: A sensitivity study of PMV-PPD and adaptive models in an Algerian reference hotel across different climate zones. Indoor and Built …. https://doi.org/10.1177/1420326x241266762
Khanal, R., & Lei, C. (2011). Solar chimney—A passive strategy for natural ventilation. Energy and Buildings, 43(8), 1811-1819. https://doi.org/https://doi.org/10.1016/j.enbuild.2011.03.035
kheyrossadat, a. (2020). Explanation of the Qualitative Values in a Space with a view on the Capabilities of Vernacular Architecture: Case Study: Context-Based Architectural Schools. Space Ontology International Journal, 1(9), 1-11. http://sanad.iau.ir/fa/Article/938368
Lin, Y. J. P., & Linden, P. F. (2002). Buoyancy-driven ventilation between two chambers. Journal of Fluid Mechanics, 463, 293-312. https://doi.org/10.1017/S0022112002008832
Liu, P.-C., Lin, H.-T., & Chou, J.-H. (2009). Evaluation of buoyancy-driven ventilation in atrium buildings using computational fluid dynamics and reduced-scale air model. Building and Environment, 44(9), 1970-1979. https://doi.org/https://doi.org/10.1016/j.buildenv.2009.01.013
Momeni, K., & Tanoorsaz, M. (2023). Comparison of the influence of exterior walls on the thermal comfort of dwellers and selection of optimal materials in hot and semi- arid climates (case study: Dezful). Journal of Architecture in Hot and Dry Climate, 11(17), 211-227. https://doi.org/10.22034/ahdc.2023.20068.1737
Moosavi, L., Mahyuddin, N., Ab Ghafar, N., & Azzam Ismail, M. (2014). Thermal performance of atria: An overview of natural ventilation effective designs. Renewable and Sustainable Energy Reviews, 34, 654-670. https://doi.org/https://doi.org/10.1016/j.rser.2014.02.035
Mouriki, E., Karava, P., Athienitis, A., Park, K.-W., & Stathopoulos, T. (2008). Full scale study of an atrium integrated with a hybrid ventilation system.
Nasrollahi, N., Abdolahzadeh, S., & Litkohi, S. (2015). Appropriate geometrical ratio modeling of atrium for energy efficiency in office buildings. Journal of Building Performance, 6(1).
Pan, Y., Li, Y., Huang, Z., & Wu, G. (2010). Study on simulation methods of atrium building cooling load in hot and humid regions. Energy and Buildings, 42(10), 1654-1660. https://doi.org/https://doi.org/10.1016/j.enbuild.2010.04.008
Pfafferott, J., Herkel, S., & Wambsganß, M. (2004). Design, monitoring and evaluation of a low energy office building with passive cooling by night ventilation. Energy and Buildings, 36(5), 455-465. https://doi.org/https://doi.org/10.1016/j.enbuild.2004.01.041
Pilechiha, P., Norouziasas, A., & ... (2022). Evaluation of occupant's adaptive thermal comfort behaviour in naturally ventilated courtyard houses. Smart and Sustainable …. https://doi.org/10.1108/sasbe-02-2021-0020
Rahaei, O., & Poorsayahi, Z. (2022). Improving the climate performance of solar chimneys for Ahvaz houses in south equator-facing rooms. Journal of Iranian Architecture & Urbanism(JIAU), 13(1), 245-257. https://doi.org/10.30475/isau.2022.221907.1365
Ratajczak, K., Amanowicz, Ł., Pałaszyńska, K., Pawlak, F., & Sinacka, J. (2023). Recent Achievements in Research on Thermal Comfort and Ventilation in the Aspect of Providing People with Appropriate Conditions in Different Types of Buildings—Semi-Systematic Review. Energies, 16(17).
Reinhart, C., Jakubiec, J., & Ibarra, D. (2013). Definition Of A Reference Office For Standardized Evaluations Of Dynamic Facade And Lighting Technologies. https://doi.org/10.26868/25222708.2013.1029
Rice, C. (2023). Atrium. books.google.com. https://books.google.com/books?hl=en&lr=&id=-iSlEAAAQBAJ&oi=fnd&pg=PR7&dq=%22atrium%22+%22thermal+comfort%22&ots=fcfQWNC0Tp&sig=GDC4IRlfhZ4rt2qPbm17Cm2sK8U
Sadeghipour Roudsari, M., & Pak, M. (2013). Ladybug: A parametric environmental plugin for grasshopper to help designers create an environmentally-conscious design. Proceedings of BS 2013: 13th Conference of the International Building Performance Simulation Association, 3128-3135.
Saxena, S., & Sharma, A. (2021). Analyzing Energy-Saving Measures and Key Metrics for Enhancing Cooling Performance in Atrium Buildings. New Approaches in Engineering Research Vol. 8, 133-145. https://doi.org/10.9734/bpi/naer/v8/10192D
Shaeri, J., Mahdavinejad, M., Vakilinejad, R., Bazazzadeh, H., & Monfared, M. (2023). Effects of sea-breeze natural ventilation on thermal comfort in low-rise buildings with diverse atrium roof shapes in BWh regions. Case Studies in Thermal Engineering, 41, 102638. https://doi.org/https://doi.org/10.1016/j.csite.2022.102638
Shafiei Fini, A., & Moosavi, A. (2016). Effects of “wall angularity of atrium” on “buildings natural ventilation and thermal performance” and CFD model. Energy and Buildings, 121, 265-283. https://doi.org/https://doi.org/10.1016/j.enbuild.2015.12.054
Shahmortezaei, S. R., & Sabernejad, J. (2016). Optimization of Proportions of Central Courtyard based on Comfort Standards in the Traditional Qajar Period Houses in Boushehr. Space Ontology International Journal, 2(5), 49-55. http://sanad.iau.ir/fa/Article/938741
Shakouri, M., Ghadamian, H., Hoseinzadeh, S., & Sohani, A. (2022). Multi-objective 4E analysis for a building integrated photovoltaic thermal double skin Façade system. Solar Energy, 233, 408-420. https://doi.org/https://doi.org/10.1016/j.solener.2022.01.036
Shayanian, A., & Qhadikolaei, F. M. (2024). The Performance of Atriums in Optimizing Energy Consumption in Commercial Complexes in Central Tehran. Islamic Art Studies. https://www.sysislamicartjournal.ir/article_127411_en.html?lang=en&lang=en&lang=en
Sorayaei, Z., Rostami, R., & Ghadikolaei, F. M. (2023). The Effect of Building Blocks Layout on Indoor Thermal Comfort and Energy Consumption of Building in the Humid Subtropical Climate of Caspian Coast. Space Ontology International Journal, 3(12), 43-57. https://doi.org/10.22094/soij.2023.1985140.1550
Topic 19 of National Building Regulations / Saving Energy Consumption. (2020).
van Hooff, T., Blocken, B., Aanen, L., & Bronsema, B. (2011). A venturi-shaped roof for wind-induced natural ventilation of buildings: Wind tunnel and CFD evaluation of different design configurations. Building and Environment, 46(9), 1797-1807. https://doi.org/https://doi.org/10.1016/j.buildenv.2011.02.009
Wang, H., & Lei, C. (2019). Theoretical modeling of combined solar chimney and water wall for buildings. Energy and Buildings, 187, 186-200. https://doi.org/https://doi.org/10.1016/j.enbuild.2019.01.025
Wang, L., Huang, Q., Zhang, Q., Xu, H., & Yuen, R. K. (2017). Role of atrium geometry in building energy consumption: The case of a fully air-conditioned enclosed atrium in cold climates, China. Energy and Buildings, 151, 228-241.
Ye, X., Zhang, Q., Li, L., & Braham, W. (2024). Research About the Coupling Effect of Solar Chimney-Tunnel Composite Ventilation System in Atrium Space: A Case Study of Creative Center in Northwest of China. International Association of Building …. https://doi.org/10.1007/978-981-97-8317-5_7
Ye, X., Zhang, Q., Li, L., & Braham, W. W. (2025). Research About the Coupling Effect of Solar Chimney-Tunnel Composite Ventilation System in Atrium Space. In U. Berardi, Multiphysics and Multiscale Building Physics Singapore.
Yetiş, C., & Kayılı, M. (2024). Improving Indoor Air Quality with Natural Ventilation Methods: A Simulation Study. iconarp.ktun.edu.tr. https://iconarp.ktun.edu.tr/index.php/iconarp/article/view/948
Zhai, Z., Baum, J., & Griego, D. (2023). Applying Natural Ventilation for Commercial Buildings With Atrium: Indoor Environment Prediction and Outdoor Pollutant Impact. ASME Journal of …. https://asmedigitalcollection.asme.org/sustainablebuildings/article/4/3/031005/1166847
Zhou, B., Huang, Y., Nie, J., Ding, L., Sun, C., & Chen, B. (2023). Modification and verification of the PMV model to improve thermal comfort prediction at low pressure. J Therm Biol, 117, 103722. https://doi.org/10.1016/j.jtherbio.2023.103722
Zou, Y., Li, Y., Chen, H., Xiao, B., & Li, Z. (2025). Multi-dimensional performance-based intelligent optimization of atrium building prototype with informed approach. Springer. https://doi.org/10.1007/s42452-024-06421-z
