نانوپوششها در خطوط انتقال هوایی برق: هادی، عایق و دکل ها
محورهای موضوعی : کاربرد نانوساختارها
مجید میرزایی
1
,
عباس فیضی نیا
2
,
یاسر قربانی امیر
3
1 - گروه پژوهشی مواد غیرفلزی، پژوهشگاه نیرو، تهران، ایران
2 - گروه پژوهشی مواد غیرفلزی، پژوهشگاه نیرو، تهران، ایران
3 - گروه پژوهشی مواد غیرفلزی، پژوهشگاه نیرو، تهران، ایران
کلید واژه: پوشش عملکردی, فوق آبگریز, ضد یخ‌زدگی, ضد کرونا, ضد تخلیه آلودگی, ضد خوردگی, خطوط انتقال هوایی.,
چکیده مقاله :
خطوط انتقال هوایی روش اصلی انتقال برق هستند. هادی‌ها، عایق‌ها و دکل‌ها تجهیزات الکتریکی اصلی این خطوط به شمار می‌روند. از آنجا که این خطوط در محیط طبیعی فعالیت می‌کنند، مشکلاتی مانند یخ‌زدگی، تخلیه کرونا، رسوب آلودگی و خوردگی به وجود می‌آید. این مشکلات می‌توانند منجر به حوادثی شوند که خسارات اقتصادی زیادی را به همراه دارند. برای حل این مشکلات، می‌توان از پوشش‌های عملکردی با ویژگی‌های فوق آبگریز، نیمه‌هادی، ضدخوردگی و سایر ویژگی‌ها بر روی تجهیزات الکتریکی استفاده کرد که دارای مزایای هزینه پایین و کارایی بالا هستند. به همین علت، پوشش‌های عملکردی در سال‌های اخیر به یکی از موضوعات پرطرفدار تحقیقات در حوزه عایق‌کاری خارجی تبدیل شده‌اند. با در نظر گرفتن چالش‌های متعدد مرتبط با تجهیزات الکتریکی در خطوط انتقال هوایی، ضرورت بهره‌گیری از رویکردهای متفاوت احساس می‌شود. این مقاله مروری، پوشش‌های عملکردی را بر اساس زمینه های کاربرد و عملکرد آن‌ها دسته‌بندی می‌کند. در هر بخش، ابتدا علل مشکلات تجهیزات الکتریکی به طور مختصر بررسی می‌شود، سپس مکانیزم عملکرد این نوع پوشش‌ها برای رفع مشکلات توضیح داده می‌شود. در ادامه، وضعیت توسعه و کاربرد این پوشش‌ها به صورت خلاصه ارائه شده و محدودیت‌های آن‌ها مورد بررسی قرار می‌گیرد. در پایان، مسائل کلیدی مرتبط با تحقیق در زمینه پوشش‌های عملکردی مرور خواهند شد و مسیرهای تحقیقاتی آینده مورد بحث قرار می‌گیرند.
Overhead transmission lines are the primary method of electricity transmission. Conductors, insulators, and towers are the main electrical equipment of these lines. Since these lines operate in a natural environment, issues such as icing, corona discharge, pollution deposition, and corrosion arise. These problems can lead to incidents that result in significant economic losses. To solve these problems, functional coatings with superhydrophobic, semiconducting, anti-corrosion, and other properties can be applied to electrical equipment, which offer low cost and high efficiency advantages. For this reason, functional coatings have become a hot research topic in the field of external insulation in recent years. Given the various problems faced by electrical equipment in overhead transmission lines, there is a need for distinct solutions. Therefore, this review classifies the coatings based on usage scenarios and functions. In each section, it first briefly states the causes of the problems with electrical equipment, then introduces the mechanism of using this type of functional coating to solve the problem, summarizes the development and application status of this type of coating, compiles the limitations of these coatings, and finally presents a summary of key issues in the research of functional coatings while looking at future research directions.
1. Li, B. et al. (2020) Protection technologies of Ultra-High-Voltage AC transmission systems Academic Press
2. Farzaneh, M. and Jakl, F. (2015) Coatings for Protecting Overhead Power Network Equipment in Winter Conditions: Working Group B2. 44 Cigré
3. Zhao, Q. et al. (2022). Review of transmission line icing and anti-icing technologies. The proceedings of the 16th Annual Conference of China Electrotechnical Society: Volume II. Springer
4. Farzaneh, M. et al. (2008) Anti-icing and de-icing techniques for overhead lines. In Atmospheric icing of power networks, pp. 229-268, Springer
5. Xu, X. (2015). The development and analysis of shot peening process to improve the aluminum conductor steel reinforced corrosion resistance. Jinan: University of ShanDong
6. Karady, G.G. et al. (1995) Flashover mechanism of silicone rubber insulators used for outdoor insulation-I. IEEE transactions on power delivery 10, 1965-1971
7. Cao, Y. et al. (2022) Multi-applicable, durable superhydrophobic anti-icing coating through template-method and chemical vapor deposition. Surfaces and Interfaces 32, 102100
8. Tourkine, P. et al. (2009) Delayed freezing on water repellent materials. Langmuir 25, 7214-7216
9. Boinovich, L.B. and Emelyanenko, A.M. (2013) Anti-icing potential of superhydrophobic coatings. Mendeleev Communications 1, 3-10
10. Lo, T.N. et al. (2021) Nanoscale coatings derived from fluoroalkyl and PDMS alkoxysilanes on rough aluminum surfaces for improved durability and anti-icing properties. ACS Applied Nano Materials 4, 7493-7501
11. Liu, G. et al. (2020) Anti-frosting/anti-icing property of nano-ZnO superhydrophobic surface on Al alloy prepared by radio frequency magnetron sputtering. Materials Research Express 7, 026401
12. Liu, G. et al. (2021). Fabrication of durable superhydrophobic aluminium surface and its anti-icing properties. 2021 International Conference on Electrical Materials and Power Equipment (ICEMPE). IEEE
13. Volpe, A. et al. (2020) Direct femtosecond laser fabrication of superhydrophobic aluminum alloy surfaces with anti-icing properties. Coatings 10, 587
14. Liao, R. et al. (2014) Fabrication of superhydrophobic surface on aluminum by continuous chemical etching and its anti-icing property. Applied Surface Science 317, 701-709
15. Jin, H.-y. et al. (2018) Investigation on preparation and anti-icing performance of super-hydrophobic surface on aluminum conductor. Chinese Journal of Chemical Physics 31, 216-222
16. Fenero, M. et al. (2020) Omniphobic etched aluminum surfaces with anti-icing ability. Langmuir 36, 10916-10922
17. Kulinich, S. et al. (2011) Superhydrophobic surfaces: are they really ice-repellent? Langmuir 27, 25-29
18. Kim, P. et al. (2012) Liquid-infused nanostructured surfaces with extreme anti-ice and anti-frost performance. ACS nano 6, 6569-6577
19. Jiang, G. et al. (2018) Superhydrophobic SiC/CNTs coatings with photothermal deicing and passive anti-icing properties. ACS applied materials & interfaces 10, 36505-36511
20. Wang, P. et al. (2020) A superhydrophobic/electrothermal synergistically anti-icing strategy based on graphene composite. Composites science and technology 198, 108307
21. Liu, Q. et al. (2015) Durability of a lubricant-infused Electrospray Silicon Rubber surface as an anti-icing coating. Applied Surface Science 346, 68-76
22. Liu, G. et al. (2022) Robust and self-healing superhydrophobic aluminum surface with excellent anti-icing performance. Surfaces and Interfaces 28, 101588
23. Yang, C. et al. (2016) Anti-icing properties of superhydrophobic ZnO/PDMS composite coating. Applied Physics A 122, 1-10
24. Tan, X. et al. (2021) A simple fabrication of superhydrophobic PVDF/SiO 2 coatings and their anti-icing properties. Journal of Materials Research 36, 637-645
25. Boinovich, L.B. et al. (2019) Modus operandi of protective and anti-icing mechanisms underlying the design of longstanding outdoor icephobic coatings. ACS nano 13, 4335-4346
26. Maruvada, P.S. (2000) Corona performance of high-voltage transmission lines Research Studies Press Baldock, UK
27. Pfeiffer, M. and Franck, C.M. (2015) Impact of conductor surface type and rain intensity on HVDC corona losses. IEEE Transactions on Power Delivery 30, 2284-2292
28. Hylten-Cavallius, N. et al. (1964) Insulation requirements, corona losses, and corona radio interference for high-voltage DC lines. IEEE Transactions on Power Apparatus and Systems 83, 500-508
29. Zhang, X. et al. (2019). Acoustic noise emitted from overhead line conductors with superhydrophobic coating. 2019 IEEE Electrical Insulation Conference (EIC). IEEE
30. Xu, P. et al. (2022) Effect of TiO2 coating on the surface condition and corona characteristics of positive DC conductors with particle matters. High Voltage 7, 147-157
31. Megala, V. and Sugumaran, C.P. (2020) Enhancement of corona onset voltage using PI/MWCNT nanocomposite on HV conductor. IEEE Transactions on Plasma Science 48, 1122-1129
32. Lin, Z. et al. (2013) Ice-phobic Coatings Based on Silicon-Oil-Infused Polydimethylsiloxane.
33. Yong, Y. et al. (2016) Positive DC corona inception on dielectric coated stranded conductors in air. The Institution of Engineering and Technology 10, 7
34. Bian, X. et al. (2019) Corona characteristics of conductor with TiO2 hydrophilic film subjected to DC high voltage. The Journal of Engineering 2019, 3046-3050
35. Lian, C. et al. (2019). Long-term durability of stearic acid silicon dioxide nanoparticle superhydrophobic coating on aluminium alloy overhead line conductors. 2019 IEEE Electrical Insulation Conference (EIC). IEEE
36. Zhang, X. et al. (2022) Experimental verification of the potential of superhydrophobic surfaces in reducing audible noise on HVAC overhead line conductors. High Voltage 7, 692-704
37. Li, B. et al. (2020). Study on corrosion test of corrosion-proof steel core of high-anticorrosive conductor. 2020 IEEE International Conference on High Voltage Engineering and Application (ICHVE). IEEE
38. Håkansson, E. et al. (2015) Galvanic corrosion of high temperature low sag aluminum conductor composite core and conventional aluminum conductor steel reinforced overhead high voltage conductors. IEEE Transactions on Reliability 64, 928-934
39. Ma, X. et al. (2017) Fretting wear behaviors of aluminum cable steel reinforced (ACSR) conductors in high-voltage transmission line. Metals 7, 373
40. Zhang, B. et al. (2016). The study on the applicability of aluminum conductor carbon core in the high incidence area of galloping for transmission lines. 2016 IEEE International Conference on High Voltage Engineering and Application (ICHVE). IEEE
41. Ujah, C. et al. (2022) Review on materials applied in electric transmission conductors. Journal of Materials Science, 1-18
42. Li, Q. et al. (2020) Surface charge pattern analysis based on the field-dependent charging theory: a review. IEEE Transactions on Dielectrics and Electrical Insulation 27, 257-269
43. Yuan, Z. et al. (2020) Review on the characteristics, heating sources and evolutionary processes of the operating composite insulators with abnormal temperature rise. CSEE Journal of Power and Energy Systems 8, 910-921
44. George, J.-M. et al. (2014) Field experience and laboratory investigation of glass insulators having a factory-applied silicone rubber coating. IEEE Transactions on Dielectrics and Electrical Insulation 21, 2594-2601
45. Pylarinos, D. et al. (2015) Comparative investigation of silicone rubber composite and room temperature vulcanized coated glass insulators installed in coastal overhead transmission lines. IEEE Electrical Insulation Magazine 31, 23-29
46. Peng, W. et al. (2019) Robust Mg (OH) 2/epoxy resin superhydrophobic coating applied to composite insulators. Applied Surface Science 466, 126-132
47. Zhu, M.-X. et al. (2021) Superhydrophobic and high-flashover-strength coating for HVDC insulating system. Chemical Engineering Journal 404, 126476
48. Ibrahim, M.E. et al. (2014) Nanofilled nonlinear coating material for improving proactive flashover performance of high voltage insulators. IEEE Transactions on Dielectrics and Electrical Insulation 21, 2156-2163
49. Castaño, J.G. et al. (2014) Ceramic insulators coated with titanium dioxide films: Properties and self-cleaning performance. Electric power systems research 116, 182-186
50. Bhushan, B. et al. (2009) Self-cleaning efficiency of artificial superhydrophobic surfaces. Langmuir 25, 3240-3248
51. Ghunem, R.A. et al. (2022) Development and application of superhydrophobic outdoor insulation: A review. IEEE Transactions on Dielectrics and Electrical Insulation 29, 1392-1399
52. Maghsoudi, K. et al. (2018) Direct replication of micro-nanostructures in the fabrication of superhydrophobic silicone rubber surfaces by compression molding. Applied Surface Science 458, 619-628
53. Patil, D. et al. (2021) Fabrication of self-cleaning superhydrophobic silicone rubber insulator through laser texturing. Surface Engineering 37, 308-317
54. Wang, H. et al. (2021) A self-healing polyurethane-based composite coating with high strength and anti-corrosion properties for metal protection. Composites Part B: Engineering 225, 109273
55. Vazirinasab, E. et al. (2019) Evaluation of atmospheric-pressure plasma parameters to achieve superhydrophobic and self-cleaning HTV silicone rubber surfaces via a single-step, eco-friendly approach. Surface and Coatings Technology 375, 100-111
56. Peng, W. et al. (2018) Creation of a multifunctional superhydrophobic coating for composite insulators. Chemical Engineering Journal 352, 774-781
57. de Santos, H. and Sanz-Bobi, M.Á. (2021) Research on the pollution performance and degradation of superhydrophobic nano-coatings for toughened glass insulators. Electric Power Systems Research 191, 106863
58. Olad, A. et al. (2021) Potential of slippery liquid infused porous surface coatings as flashover inhibitors on porcelain insulators in icing, contaminated, and harsh environments. Progress in Organic Coatings 151, 106082
59. Zhuang, J. (2010) Structure modification of TiO2 film and its novel application for promoting the anti-contamination performance of high voltage outdoor insulators. Fuzhou: University of Fuzhou,
60. Zhuang, J. et al. (2010) A novel application of nano anticontamination technology for outdoor high‐voltage ceramic insulators. International journal of applied ceramic technology 7, E46-E53
61. Farzaneh, M. et al. (2010) Systems for prediction and monitoring of ice shedding, anti-icing and de-icing for power line conductors and ground wires.
62. Wei, X. et al. (2014) Development of anti-icing coatings applied to insulators in China. IEEE Electrical Insulation Magazine 30, 42-50
63. Liao, W. et al. (2007) Reducing ice accumulation on insulators by applying semiconducting RTV silicone coating. IEEE Transactions on Dielectrics and Electrical Insulation 14, 1446-1454
64. Qin, Y. et al. (2009). An application of RTV with different conductivities in anti-icing. 2009 IEEE 9th International Conference on the Properties and Applications of Dielectric Materials. IEEE
65. Wei, X. et al. (2016) Effect of the Parameters of the Semiconductive Coating on the Anti-Icing Performance of the Insulators. IEEE Transactions on Power Delivery 31, 1413-1421
66. Yan, X. et al. (2016) An OH-PDMS-modified nano-silica/carbon hybrid coating for anti-icing of insulators part ii: Anti-icing performance. IEEE Transactions on Dielectrics and Electrical Insulation 23, 2165-2173
67. Li, X. et al. (2014) A study on superhydrophobic coating in anti-icing of glass/porcelain insulator. Journal of sol-gel science and technology 69, 441-447
68. Guo, C. et al. (2015) Glaze icing on superhydrophobic coating prepared by nanoparticles filling combined with etching method for insulators. Journal of Nanomaterials 2015, 404071
69. Zuo, Z. et al. (2015). Fabrication and anti-icing property of superhydrophobic coatings on insulator. 2015 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP). IEEE
70. Emelyanenko, A.M. et al. (2017) Reinforced superhydrophobic coating on silicone rubber for longstanding anti-icing performance in severe conditions. ACS applied materials & interfaces 9, 24210-24219
71. Sun, J. et al. (2020) Wettability behavior and anti-icing property of superhydrophobic coating on HTV silicone rubber. AIP Advances 10,
72. Hong, Z. et al. (2022) Anti-icing ceramics surface induced by femtosecond laser. Ceramics International 48, 10236-10243
73. Jiang, X. et al. (2010) Effect of hydrophobicity coating on insulator icing and DC flashover performance of iced insulators. IEEE Transactions on Dielectrics and Electrical Insulation 17, 351-359
74. Hu, Q. et al. (2021) Study on modification of room temperature vulcanized silicone rubber by microencapsulated phase change material. Journal of Energy Storage 41, 102842
75. Zhu, L. et al. (2013) Ice-phobic coatings based on silicon-oil-infused polydimethylsiloxane. ACS applied materials & interfaces 5, 4053-4062
76. Yuan, Y. et al. (2021) Fabrication of phase change microcapsules and their applications to anti-icing coating. Surfaces and Interfaces 27, 101516
77. Shreepathi, S. et al. (2010) Electrochemical impedance spectroscopy investigations of epoxy zinc rich coatings: Role of Zn content on corrosion protection mechanism. Electrochimica Acta 55, 5129-5134
78. Alibakhshi, E. et al. (2014) Sodium zinc phosphate as a corrosion inhibitive pigment. Progress in Organic Coatings 77, 1155-1162
79. Arman, S. et al. (2013) Application of the electrochemical noise to investigate the corrosion resistance of an epoxy zinc-rich coating loaded with lamellar aluminum and micaceous iron oxide particles. Corrosion Science 77, 118-127
80. Ecco, L.G. et al. (2016) Waterborne acrylic paint system based on nanoceria for corrosion protection of steel. Progress in Organic Coatings 96, 19-25
81. Wang, L. et al. (2016). Influences of transmission tower anticorrosive coatings on electrical performance of composite insulator. 2016 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP). IEEE
82. Popoola, A. et al. (2016) Anti-corrosion coating of mild steel using ternary Zn-ZnO-Y2O3 electro-depositon. Surface and Coatings Technology 306, 448-454
83. Fan, W. et al. (2020) Epoxy coating capable of providing multi-component passive film for long-term anti-corrosion of steel. Applied Surface Science 521, 146417
84. Nayak, S.R. et al. (2021) Functionalized multi-walled carbon nanotube/polyindole incorporated epoxy: An effective anti-corrosion coating material for mild steel. Journal of Alloys and Compounds 856, 158057
