Non-Linear Vibrations of Graphene Nanoplatelet-Reinforced Composite Beams using Non-Local Strain Gradient Theory
محورهای موضوعی : meso/micro/nano fabrication
1 - Department of Mechanical Engineering, Shahrekord branch, Islamic Azad University, Shahrekord, Iran
کلید واژه: Galerkin Method, GPLRC, Homotopy Analysis Method, Nonlocal Strain Gradient Theory (NLSGT) ,
چکیده مقاله :
With the growing integration of nanotechnology into everyday life and the importance of nanoelectromechanical systems, this article examines the non-linear free vibrations of an Euler-Bernoulli (EB) composite beam reinforced with graphene nanoplatelets (GN), considering the Non-Local Strain Gradient Theory (NLSGT). First, the elastic properties of the nanocomposite reinforced with GN were calculated using the rules of mixtures and the Halpin-Tsai (HT) model. Then, the Equations describing the motion for the EB beam were obtained through the virtual work law, the NLSGT, and the von Kármán (VK) strain field, and were analyzed through the homotopy technique. After solving the Equations, the obtained results were compared with those available in other sources, showing a very good agreement. Finally, the outcomes of varying the graphene plates (GPLs) weight fraction, the GPLs distribution, and the proportional ratio of length to thickness of the beam regarding the non-linear natural frequency (NF) were investigated where one of the important results of this paper is that the highest non-linear NF occurs first in the X-GPLRC distribution, then in the A-GPLRC distribution, and finally in the O-GPLRC distribution.
With the growing integration of nanotechnology into everyday life and the importance of nanoelectromechanical systems, this article examines the non-linear free vibrations of an Euler-Bernoulli (EB) composite beam reinforced with graphene nanoplatelets (GN), considering the Non-Local Strain Gradient Theory (NLSGT). First, the elastic properties of the nanocomposite reinforced with GN were calculated using the rules of mixtures and the Halpin-Tsai (HT) model. Then, the Equations describing the motion for the EB beam were obtained through the virtual work law, the NLSGT, and the von Kármán (VK) strain field, and were analyzed through the homotopy technique. After solving the Equations, the obtained results were compared with those available in other sources, showing a very good agreement. Finally, the outcomes of varying the graphene plates (GPLs) weight fraction, the GPLs distribution, and the proportional ratio of length to thickness of the beam regarding the non-linear natural frequency (NF) were investigated where one of the important results of this paper is that the highest non-linear NF occurs first in the X-GPLRC distribution, then in the A-GPLRC distribution, and finally in the O-GPLRC distribution.
[1] Haghani, A., Jahangiri, M., and Ghaderi, R., Nonlinear Vibrations of Timoshenko Nanobeam Using Stress Driven Nonlocal Theory, Physica Scripta, Vol. 97, No. 7, 2022, pp. 095206.
[2] Zaera, R., Serrano, Ó., and Fernández-Sáez, J., On the Consistency of The Nonlocal Strain Gradient Elasticity, International Journal of Engineering Science, Vol. 138, 2019, pp. 65-81.
[3] Yin, J., Zou, Y., Li, J., Zhang, W., Li, X., and Habibi, M., Dynamic Stability and Frequency Responses of The Tilted Curved Nanopipes in A Supersonic Airflow via 2D Hybrid Nonlocal Strain Gradient Theory, Engineering Structures, Vol. 301, 2024, pp.117240.
[4] Guo, Y., Maalla, A., and Habibi, M., Electroelastic Wave Dispersion in The Rotary Piezoelectric NEMS Sensors/Actuators via Nonlocal Strain Gradient Theory, Mechanical Systems and Signal Processing, Vol. 216, 2024, pp.111453.
[5] Biswas, S., The Propagation of Plane Waves in Nonlocal Visco-Thermoelastic Porous Medium Based on Nonlocal Strain Gradient Theory, Waves in Random and Complex Media, Vol. 34, No. 1, 2024, pp.372-403.
[6] Trabelssi, M., El-Borgi, S., and Friswell, M. I., Application of Nonlocal Strain Gradient Theory for The Analysis of Bandgap Formation in Metamaterial Nanobeams, Applied Mathematical Modelling, Vol. 127, 2024, pp. 281-296.
[7] Phung-Van, P., Hung, P. T., Nguyen-Xuan, H., and Thai, C. H., Small Scale Analysis of Porosity-Dependent Functionally Graded Triply Periodic Minimal Surface Nanoplates Using Nonlocal Strain Gradient Theory, Applied Mathematical Modelling, Vol. 127, 2024, pp. 439-453.
[8] Liu, C., Yu, J., Zhang, B., and Zhang, C., Size Parameter Calibration of Nonlocal Strain Gradient Theory Based on Molecular Dynamics Simulation of Guided Wave Propagation in Aluminum Plates, Thin-Walled Structures, Vol. 198, 2024, pp. 111659.
[9] Singh, B., Jangid, K., and Mukhopadhyay, S., Implementation of Legendre Wavelet Method for The Size Dependent Bending Analysis of Nano Beam Resonator Under Nonlocal Strain Gradient Theory, Computers & Mathematics with Applications, Vol. 153, 2024, pp. 94-107.
[10] Behar, M., Boukhalfa, A., and Aouinat, A. L., Examining the Critical Speed and Electro-Mechanical Vibration Response of a Spinning Smart Single-Walled Nanotube Via Nonlocal Strain Gradient Theory, Mechanics of Advanced Materials and Structures, 2024, pp. 1-17.
[11] Merzouki, T., Houari, M. S. A., Nonlocal Strain Gradient Theory for Free Vibration Analysis of FG Nano-scale Beams in Thermal Environments Using an Efficient Numerical Model, Journal of Vibration Engineering & Technologies, 2024, pp. 1-26.
[12] Guerroudj, M., Drai, A., Daikh, A. A., Houari, M. S. A., Aour, B., Eltaher, M. A., and Belarbi, M. O., Size-Dependent Free Vibration Analysis of Multidirectional Functionally Graded Nanobeams Via a Nonlocal Strain Gradient Theory, Journal of Engineering Mathematics, Vol. 146, No. 1, 2024, pp. 20.
[13] Haghani, A., Kiani, Y., Closed Form Expressions for Nonlinear Analysis of FG-GPLRC Beam Under Thermal Loading: Thermal Postbuckling and Nonlinear Bending, International Journal of Structural Stability and Dynamics, Vol. 24, No. 2, 2024, pp. 2450016.
[14] Bahranifard, F., Malekzadeh, P., and Golbahar Haghighi, M. R., Large Amplitude Vibration of Sandwich Beams with GPLRC Face Sheets and Porous Core Under Moving Load, Mechanics Based Design of Structures and Machines, Vol. 52, No. 3, 2024, pp. 1627-1650.
[15] Safaei, M., Malekzadeh, P., and Haghighi, M. G., Out-of-Plane Moving Load Response and Vibrational Behavior of Sandwich Curved Beams with GPLRC Face Sheets and Porous Core, Composite Structures, Vol. 327, 2024, pp. 117658.
[16] Mirzaei, M., Vibration Characteristics of Sandwich Plates with GPLRC Core and Piezoelectric Face Sheets with Various Electrical and Mechanical Boundary Conditions, Mechanics Based Design of Structures and Machines, Vol. 52, No. 2, 2024, pp. 990-1013.
[17] Ghatreh Samani, S., Beheshti, H., Akbarzadeh, A. H., and Kiani, Y., Frequency Assessment of Sandwich Rectangular Plates with an Anisogrid Core and GPLRC Face Sheets, International Journal of Structural Stability and Dynamics, 2024, pp. 2550175.
[18] Lim, C. W., Zhang, G., and Reddy, J., A Higher-Order Nonlocal Elasticity and Strain Gradient Theory and Its Applications in Wave Propagation, Journal of the Mechanics and Physics of Solids, Vol. 78, 2015, pp. 298-313.
[19] Faghidian, S. A., Reissner Stationary Variational Principle for Nonlocal Strain Gradient Theory of Elasticity, European Journal of Mechanics-A/Solids, Vol. 70, 2018, pp. 115-126.
[20] Liao, S., Advances in the Homotopy Analysis Method, World Scientific, China, 2013, pp. 1-35, 978-9814551243.
Int. J. Advanced Design and Manufacturing Technology, 2024, Vol. 17, No. 4, pp. 19-27
DOI: 10.71644/admt.2024.1129386 ISSN: 2252-0406 https://admt.isfahan.iau.ir
Non-Linear Vibrations of Graphene Nanoplatelet-Reinforced Composite Beams using Non-Local Strain Gradient Theory
Ahmad Haghani*
Department of Mechanical Engineering,
Shahrekord branch, Islamic Azad University, Shahrekord, Iran
E-mail: a.haghani@iaushk.ac.ir, ahmad_h117@yahoo.co.uk
*Corresponding author
Received: 17 August 2024, Revised: 15 October 2024, Accepted: 2 November 2024
Keywords: Galerkin Method, GPLRC, Homotopy Analysis Method, Nonlocal Strain Gradient Theory (NLSGT)
Biographical notes: Ahmad Haghani received his PhD in Mechanical Engineering from the Science and Research Branch, Islamic Azad University, Tehran, Iran in 2017. He is currently an Assistant Professor at the Department of Mechanical Engineering, Shahrekord Branch, Islamic Azad University, Shahrekord, Iran. His current research interest includes FG-GPLRC and nonlocal strain gradient theory.
1 Introduction
Nanoelectromechanical systems (NEMS) are considered one of the important branches of mechanical science, and beams are one of the critical components in NEMS, with widespread applications in nanocomposites. On the other hand, the classical theories in continuum mechanics have a limitation in studying the mechanical behaviour of nanostructures. These theories overlook the voids between atoms and the atomic forces within particles, which cannot be ignored in nanoscale problems. Therefore, considering the high cost of experimental studies at the nanoscale, generalized continuum mechanics theories have been proposed [1]. One such theory based on generalized continuum mechanics is the NLSGT [1-2]. Several studies have utilized this theory to solve various problems, including the following examples.
Yin and colleagues [3] investigated the vibrational behaviour of a curved nanotube subjected to supersonic airflow and internal fluid flow. They used the NLSGT to model the size-affected nanotube and derived the motion Equations through the use of Hamilton's principle (HP). To solve the Equations, the generalized differential quadrature technique was utilized.
Guo and colleagues [4] introduced a computational method to assess the non-linear electro-elastic wave scattering features in a nanoscale sandwich tube. They extracted the fundamental Equations of the problem by employing the NLSGT, HP, and the first-order shear deformation theory (FSDT). The Equations were then resolved through the finite element technique and neural networks to calculate the exact non-local functions and length scales under various conditions affecting the tube.
Biswas [5] investigated the distribution of harmonic plane waves in a non-local visco-thermo-elastic porous medium according to the NLSGT. The governing Equations were derived via the Green-Naghdi Type III model assumptions and the NLSGT. Finally, the impacts of the nonlocality length factor, viscosity, and porosity on phase speeds, damping factors, and wave infiltration depth at different frequencies were studied.
Trabelssi and colleagues [6] studied wave distribution in an EB nanobeam using the NLSGT. They employed HP to derive the beam's motion Equations and investigated the effects of the non-local factor and strain gradient (SG) factor on wave distribution. Phung-Van and colleagues [7] investigated the mechanical behavior of an FG nanosheet by employing the NLSGT. The study indicated that the mechanisms influencing stiffness in the nanoplate can be controlled by optimizing the non-local and SG factors. Liu and colleagues [8] investigated the free vibrations of an aluminum plate considering the NLSGT and molecular dynamics (MD) modelings. They calibrated the size factors in the NLSGT using MD modelings.
Singh and colleagues [9] predicted the bending specifications of an EB beam using the Moore-Gibson-Thompson thermoelasticity model along with the NLSGT. After deriving the governing Equations, they employed the Laplace transform and the wavelet estimation techniques to resolve these Equations. Behar and colleagues [10] investigated and analyzed the stability and vibrations of a rotating smart nanotube under electrical loads. They derived the boundary conditions and governing Equations using the NLSGT, EB beam theory, and HP and solved them using the Galerkin technique. Finally, they examined the impacts of the length scale of the material, non-local factors, rotational speed, boundary conditions, and external voltage on the NF.
Merzouki and Houari [11] performed an in-depth investigation of thermal vibrations in FG nanobeams, taking into account the temperature-dependent characteristics of the material. They used an extended finite element method based on the NLSGT to solve the problem and investigated 3 thermal loading categories.
Guerroudj and colleagues [12] studied the free vibrations of an FG nanobeam. They extracted the motion Equations using the higher-order SDT and the NLSGT. They also evaluated simple boundary conditions for the beam and examined the effects of structural geometry, gradient parameter, and non-local factors on the frequency of oscillation. Using nanocomposites reinforced with GN can impart diverse properties to the mechanical behavior of nanoplates and nanobeams [13]. Some of the research that has utilized these materials in the mechanical structures of nanoplates and nanobeams includes the following:
Bahranifard and colleagues [14] studied the non-linear vibration features and reactions of sandwich beams with graphene-reinforced coating layers and a porous core under moving loads. They extracted the motion Equations based on the FSDT and resolved the issues by the Newmark and Newton-Raphson methods. They found that the softening effects due to porosity rely on the arrangement of their distribution.
Safaei and colleagues [15] examined the out-of-plane free vibrations and responses to moving loads of curved sandwich beams with graphene-reinforced coating layers and a porous core. They extracted the governing Equations based on the FSDT and HP, and resolved them by differential quadrature technique and Newmark's technique. Numerical results showed that adding a small quantity of GPLs to the coating layers and core significantly changes the fundamental NF and movement ranges subject to the moving loads.
Mirzaei [16] studied the vibrations of composite plates reinforced with GN. The elasticity modulus of the plate was achieved by the HT law. The Equations governing the system were derived from the FSDT and addressed through the Ritz technique.
Ghatreh Samani and colleagues [17] investigated the free vibrations of a sandwich plate with two coating layers reinforced with GPLs. The motion Equations were established through HP and solved using the Navier technique. They ultimately examined the effect of the graphene plate pattern and their weight ratio on the natural frequencies.
Considering the research conducted on beams reinforced with GN and the NLSGT, it is evident that very few studies have been done on the use of GN combined with the NLSGT. The present work investigates the non-linear vibrations of an EB beam reinforced with carbon nanoplatelets according to the NLSGT. Initially, using the virtual work theory, classical deformation theory, NLSGT, and the VK strain field, the non-linear Equations of motion for the nanotube are derived. These Equations are then solved using the Galerkin and homotopy techniques [1]. Finally, after validating the solution, results on the variations in NF with different GPL distribution patterns, proportional ratio of length to thickness, and SG and non-local factors will be presented.
2 Non-local strain gradient theory (NLSGT)
In NLSGT [18], both the non-local elastic stress and the SG stress are considered. Therefore, the overall stress is written as follows:
(1) |
|
In this relation, E is the elastic modulus, ea is the non-local factor, and ls is the SG length.
3 Size-affected Equations of motion for an EB beam
Figure 1 shows an EB beam with thickness h, length L, and width b.
Fig. 1 The EB Beam.
The displacement field governing the EB beam is formulated as follows, where ux is the movement along the direction of x, uy is the movement along the direction of y, and uz is the movement along the direction of z.
(2) |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
(3) |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
(4) |
|
By substituting “Eq. (3) into Eq. (4)” and using the method of integration by parts, the following Equation is obtained.
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
(6) |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
(7) |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
(9) |
|
To compute the motion Equations, HP is used, which is given by the subsequent Equation.
(10) |
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
(11)
In the above Equation, the stiffness coefficients A11 and D11 are calculated according to the subsequent Equation.
(12) To obtain the differential conditions for dynamic equilibrium in terms of displacement, it is assumed that the in-plane inertia is negligible. Therefore, the first term in “Eq. (11)” can be ignored [19]. Given that the beam is clamped at both ends, the classical and higher-order boundary conditions are provided by the subsequent Equation.
Based on the above information, the second Equation of “Eq. (11)” is rewritten regarding the displacements as follows:
To solve the above Equation, the function w(x) is initially assumed as follows:
Considering the beam's clamped ends, the function χm(x) is assumed as follows [19]:
“Eq. (16)” is substituted into “Eq. (15)”, and after differentiating and using the Galerkin technique, the subsequent Equation is obtained.
4 Homotopy Solution Technique The homotopy technique is considered one of the most efficient semi-analytical techniques for solving non-linear differential Equations, which has rapid and successful convergence. Generally, a non-linear differential Equation can be considered as shown below, where N is the non-linear operator, g(x) is the unknown operation, and x is the independent variable [20].
The homotopy combination is generally expressed by the subsequent Equation [20].
According to Taylor's theorem, the function g(x) can be expanded as a series according to the subsequent Equation.
Additionally, the governing Equation for gm(x) is expressed as follows:
“Eq. (32)” is non-dimensionalized as follows:
COPYRIGHTS © 2024 by the authors. Licensee Islamic Azad University Isfahan Branch. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution 4.0 International (CC BY 4.0) (https://creativecommons.org/licenses/by/4.0/) سکوی نشر دانش
سند یا سکوی نشر دانش ،سامانه ای جهت مدیریت حوزه علمی و پژوهشی نشریات دانشگاه آزاد می باشد
پیوندهای سایتمراکز مرتبطپشتیبانی
صفحات رسمی
حقوق این وبسایت متعلق به سامانه مدیریت نشریات دانشگاه آزاد اسلامی است. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
