Modelling fuzzy multi-criteria decision-making method to locate industrial estates based on geographic information system
محورهای موضوعی : Research paper
Mohammad Reza Jangjoo
1
(Tehran, Rey city, municipality, district 20)
کلید واژه: fuzzy logic, GIS, spatial planning, Industrial Estate,
چکیده مقاله :
Existing conditions for locating urban equipment and facilities require a set of limiting and reinforcing factors. Interaction of environmental, industrial, social and political changes in our rapid growth adds to the complexity of regional systems. Locating takes place by various methods, in which the priority is the application of modern methods leading to reduced uncertainty. The present study aimed to select the best location using nine criteria (slope, distance from fault, distance from river, distance from road, and distance from villages, soil type, land use, average temperature, and average rainfall) in GIS software for mapping. Fuzzy logic and fuzzy-analytical hierarchy process (FAHP) model were applied to reduce location uncertainty. The accuracy of the results was checked using field data, in which six stations designated for the establishment of industrial estates in the study area were compared with the results of the FAHP model. The results of FAHP model in GIS software and their validation showed that the proposed model has excellent capabilities in locating industrial estates.
Aalipour, M., Jabbarian Amiri, B., Foroug, S. (2020). 'Assessing the Conformity of Industrial Development with the Development in Ardabil Province Using Fuzzy Multi Criteria Decision-Making Method', Environmental Researches, 10(20):35-48.
Babaei, A., and Ownegh, M. (2006). Evaluation of development and management capacity of Poshtkuh watershed. Agricultural Sciences and Natural Resources, 13 (1), 127-137. https://www.sid.ir/fa/journal/ViewPaper.aspx?id=45528
Brookes,C.J, (2001),“A genetic algorithm for designing optimal patch configurations in GIS” International Journal of Geographical Information Science, Vol. 15, No. 6, PP. 539–559.
Chiu, ASF and Yong, G, (2004), “On the industrial ecology potential in Asian Developing Countries” Journal of Cleaner Production, Vol. 12, PP. 1037–1045.
Densham, P. J, and Rushton, G, (1988), “Decision support systems for locational planning” R. G. Golledge, and H. Timmermans (Eds.), Behavioural Modelling in Geography and Planning, London, England, PP. 56–90.
Esmaeili Hyderabad, V. (2007). Research in the prevailing winds of Ardabil to locate industries. MSc Thesis, Faculty of Humanities. Natural Geography Group. Islamic Azad University of Ardabil, Iran.
Fataei, E. Al-Sheikh, A. (2009). Housing Site Selection of Landfills for Urban Solid Wastes Using GIS Technology and Analytical Hierarchy Process (A Case Study in the City of Givi). Environmental Sciences, 6(3).
Fataei, E. (2015). 'Feasibility Study of Border Industrial Town Using AHP and TOPSIS', Geography And Development Iranian Journal, 12(37), pp. 181-194. doi: 10.22111/gdij.2015.1827.
Fataei, E. Aalipour, M. Farhadi, H. and Mohammadian, A. (2015). Industrial State Site Selection Using MCDM Method and GIS in Germi, Ardabil, Iran, Journal of Industrial and Intelligent Information, 3(4):324-329. doi: 10.12720/jiii.3.4.324-329.
Fernandez,I,Ruiz,M.C,(2009),“Descriptive model and evaluation system to locate sustainable industrial areas” Journal of Cleaner Production, 17: 87-100.
Feyzi, S. Khanmohammadi, M. Abedinzadeh, N. Aalipour, M. 2019. Multi- criteria decision analysis FANP based on GIS for siting municipal solid waste incineration power plant in the north of Iran. Sustainable Cities and Society, 47. Online: https://doi.org/10.1016/j.scs.2019.101513.
Forslid,R, Haaland,J.I, Midelfart,K.H, (2002), “A U-shaped Europe? A simulation study of industrial location” Journal of International Economics, Vol. 57, PP. 273–97.
Jafari H.R., Karimi, R. (2005). Locating suitable areas for the construction of industry in Qom province using geographic information systems. Journal of Environmental Studies (in Persian), 37: 52-45
Jaszkiewicz,A,(2002),“Genetic local search for multi-objective combinatorial optimization” European Journal of Operational Research, Vol. 137, PP. 50–71.
keneth,l,(2000), “Relocation of a manufacturing distribution facility from supply chain perspectives:a physical programming approach, advance in management science“ JAI press,PP. 15-39.
Mirata M, Emtairah, T, (2005),“Industrial symbiosis networks and the contribution to environmental innovation: the case of the Landskrona industrial symbiosis programme” Journal of Cleaner Production, Vol. 13, PP. 993–1002.
Molaei, S. Khanmohammadi, M. Aalipour, M. Hashemi, M. 2018. Modeling ecotourism zoning using FAHP (case study: Masal area). Asian journal of water, Environment and Pollution, 15 (2).
Motiei Langroudi, S., Nasiri, H., Azizi, A., Mostafaei, A. (2012). Modeling the ecological potential of the land from the perspective of agricultural and rangeland uses using Fuzzy AHP method in GIS environment (Case study of Marvdasht city). Landuse Management(In Persian), 4 (6), 101-124. https://www.sid.ir/fa/journal/ViewPaper.aspx?id=195674
Nami, D., Fataei, E., Nejaei, A., Zaeimdar, M. (2017). 'Evaluation of environmental potential in Parsabad, Moghan for urban development using GIS and AHP', Journal of Environmental Science and Technology, 19(5), pp. 475-486. doi: 10.22034/jest.2017.11350.
Nidumolu,U.B,DeBie,C,VanKeulen,H,Skidmore,A.K,Harmsen,K,(2006),“Review of a land use planning programme through the soft systems methodology” Land use Policy, Vol. 23, PP.187–203
Pooladdezh,M,(1997),“ Industrial projects site selection and efficiency” 5th Ed.Perag Pub,Tehran, Iran.
Saaty,T.L,(1980),“The Analytic Hierarchy Process” New York, NY: Mc Graw-Hill.
Sial,R.A, Chaudhary, M.F, Abbas,S.T, Latif,M.I, Khan,A.G, (2006),“Quality of effluents from Hattar Industrial Estate” Springer, Journal of Zhejiang University - Science B, PP. 933-1014.
Samadi Khadem, R, Fataei, E., Joharchi, P., Ramezani ME., (2020) Site Selection of Hazardous Waste Landfill: A Case Study of Qazvin Province, Journal of Health 11 (3), 281-298.
Witlox,F, Timmermans,H.J.P,(2000),“Matisse: a knowledge-based system for industrial site selection and evaluation ” Computers, Environment and Urban Systems, Vol. 24, No. 1, PP. 23–43.
