Optimal overhaul–replacement policy for a multi-degraded repairable system sold with warranty
محورهای موضوعی : Mathematical Optimization
Kusmaningrum Soemadi
1
(
Department of Industrial Engineering, Institut Teknologi Nasional Bandung (Itenas), Bandung, 40124, Indonesia
)
Bermawi Priyatna Iskandar
2
(
Department of Industrial Engineering, Institute Technology of Bandung (ITB), Bandung, 40132, Indonesia
)
Harsono Taroepratjeka
3
(
Department of Industrial Engineering, Institut Teknologi Nasional Bandung (Itenas), Bandung, 40124, Indonesia
)
کلید واژه: Dynamic programming, Warranty, Multi degraded repairable system, Minimal repair/overhaul/replacement, Sequential optimal decision,
چکیده مقاله :
In this research, we study an optimal overhaul–replacement policy of a multi-degraded repairable system sold with a free replacement warranty. In the proposed replacement policy, a maintenance action and failure are dependent on a system degradation level and the system age, and hence the replacement model will provide more effective maintenance decisions. Failure of the system is modeled using a rate of occurrence of failure for the system, which is as a function of a degradation level of the system and its age. We develop the optimal replacement policy for a multi-degraded repairable system from the buyer’s point of view, who plans to use the system for a horizon planningT. The buyer conducts a periodic evaluation and selects an appropriate maintenance option based on the revealed system condition together with the system operational age. At each evaluation point, three alternative decisions are available, i.e., keep running the system, overhaul, or replace it with a new one. We formulate the sequential decision (keep, overhaul, or replace) problem as a dynamic programming model and obtain an optimal policy that minimizes total cost overT. Numerical examples are presented using several hypothetical data sets to illustrate the structure of optimal solution and its sensitivity against the change in parameter values. The main contribution of the paper is to offer a decision tool that will help in deciding the overhaul–replacement action based on the degradation level and the operational age of the system.
Amari SV, McLaughlin L, Pham H (2006) Cost-efective conditionbased maintenance using Markov decision processes. In: Proceedings of IEEE annual reliability and maintainability symposium, 23–26 January, pp 464–469
Blischke WR, Murthy DNP (1994) Warranty cost analysis. Marcel Dekker, Inc., New York
Caballé NC, Castro IT, Pérez CJ, Lanza-Gutiérrez JM (2015) A condition-based maintenance of a dependent degradation-thresholdshock model in a system with multiple degradation processes. Reliab Eng Syst Saf 134:98–109
Cheng S, Nicholson BE, Epelman MA, Reaume Daniel J R, Smith RL (2013) A dynamic programming approach to achieving
an optimal end-state along a serial production line. IIE Trans 45(12):1278–1292
Chouhan R, Gaur M, Tripathi R (2013) A survey of preventive maintenance planning, models, techniques and policies for an ageing, and deteriorating production systems. HCTL Open Int J Technol Innov Res 3:1–19
Doyen L, Gaudoin O (2004) Classes of imperfect repair models based on reduction of failure intensity or virtual age. Reliab Eng Syst Saf 84(1):45–56
Hartman JC, Rogers J (2006) Dynamic programming approaches for equipment replacement problems with continuous and discontinuous technological change. IMA J Manag Math 17(2):143–158
Hokstad P, Frovig AT (1996) The modelling of degraded and critical failures for components with dormant failures. Reliab Eng Syst Saf 51:189–199
Huynh KT, Castro IT, Barros A, Bérenguer C (2011) Modeling agebased maintenance strategies with minimal repairs for systems subject to competing failure modes due to degradation and shocks. Eur J Oper Res 218(1):140–151
Iskandar BP, Husniah H, Pasaribu US (2016) Maintenance service contracts for equipment sold with two dimensional warranties. Qual Technol Quant Manag 11(3):321–333
Jack N, Dagpunar JS (1994) An optimal imperfect maintenance policy over a warranty period. Microelectron Reliab 34(3):529–534
Jack N, Iskandar BP, Murthy DNP (2009) A repair-replace strategy based on usage rate for items sold with a two-dimensional warranty. Reliab Eng Syst Saf 94:611–617
Jung GM, Park DH (2003) Optimal maintenance policies during the post-warranty period. Reliab Eng Syst Saf 82(2):173–185
Khatab A, Ait-Kadi D, Rezg N (2012) A condition-based maintenance model for availability optimization for stochastic degrading systems. In: 9th international conference on modeling, optimization & simulation, Jun 2012, Bordeaux, France
Kumar G, Jain V, Gandhi OP (2018) Availability analysis of mechanical systems with condition-based maintenance using semi-Markov and evaluation of optimal condition monitoring interval. J Ind Eng Int 14:119–131
Kurt M, Kharoufeh J (2010) Optimally maintaining a markovian deteriorating system with limited imperfect repairs. Eur J Oper Res 205:368–380
Moghaddass R, Zuo MJ (2014) Multistate degradation and condition monitoring for devices with multiple independent failure modes. In: Frenel IB, Karagrigoriou A, Lisnianski A, Kleyner A (eds) Applied reliability engineering and analysis. Wiley, Hoboken, p 45
Moustafa MS (2002) Optimal minimal maintenance of multistage degraded system with repairs. Econ Qual Control 17(1):5–12
Moustafa MS, Maksoud A, Sadek S (2004) Optimal major and minimal maintenance policies for deteriorating systems. Reliab Eng Syst Saf 83:363–368
Nakagawa T (2005) Maintenance theory of reliability. Springer, London
Nodem DFI, Kenne JP, Gharbi A (2011) Simultaneous control of production, repair/replacement and preventive maintenance of deteriorating manufacturing systems. Int J Prod Econ 13:271–282
Okamura H, Dohi T, Osaki S (2014) A dynamic programming approach for sequential preventive maintenance policies with two failure modes. In: Nakamura S, Qian CH, Chen M (eds) Reliability modeling with applications, chapter 1. World Scientifc Publishing, Singapore, pp 3–16
Pascual R, Ortega JH (2006) Optimal replacement and overhaul decisions with imperfect maintenance and warranty contracts. Reliab Eng Syst Saf 91:241–248
Pham H, Wang H (1996) Imperfect maintenance. Eur J Oper Res 94:425–438
Pierskalla WP, Voelker A (1976) A survey of maintenance models; the control and surveillance of deteriorating systems. Naval Res Logist 23:353–388
Sahin I, Polatoglu H (1996) Maintenance strategies following the expiration of warranty. IEEE Trans Reliab 45(2):220–228
Shafee M, Chukova S (2013) Maintenance models in warranty: a literature review. Eur J Oper Res 229(3):561–572
Sidibe IB, Khatab A, Diallo C, Kassambara A (2017) Preventive maintenance optimization for a stochastically degrading system with a random initial age. Reliab Eng Syst Saf 159:255–263
Soemadi K, Iskandar BP, Taroepratjeka H (2014) Optimal overhaulreplacement policies for a repairable machine sold with warranty. J Eng Technol Sci 46(4):465–483
Soro IW, Nourelfath M, Aït-Kadi D (2010) Performance evaluation of multi-state degraded systems with minimal repairs and imperfect maintenance. Reliab Eng Syst Saf 95:65–69
Soro IW, Nourelfath M, Aït-Kadi D (2012) Production rate maximization of a multi-state system under inspection and repair policy. Int J Perform Eng 8(4):409–416
Valdez-Flores C, Feldman RM (1989) A survey of preventive maintenance models for stochastically deteriorating single-unit systems. Naval Res Logist 36:419–446
Wang Hongzhou (2002) A survey of maintenance policies of deteriorating systems. Eur J Oper Res 139(16):464–489
Wang Y, Liu Z, Liu Y (2015) Optimal preventive maintenance strategy for repairable item under two-dimensional warranty. Reliab Eng Syst Saf 142:326–333
Wang J, Zhou Z, Peng H (2017) Flexible decision models for a twodimensional warranty policy with periodic preventive maintenance. Reliab Eng Syst Saf 162:14–27
Yang L, Ma X, Peng R, Zhai Q, Zhao Y (2017) A preventive maintenance policy based on dependent two-stage deterioration and external shocks. Reliab Eng Syst Saf 160:201–211
Zhang J, Huang X, Fang Y, Zhou J, Zhang H, Li J (2016) Optimal inspection-based preventive maintenance policy for three-state mechanical components under competing failure modes. Reliab Eng Syst Saf 152:95–103
