Landslide Hazard Zonation Using AHP Model (A case study: Ayvashan damwatershed, Lorestan)
محورهای موضوعی : Engineering geology
Siamak Baharvand
1
(Department of Geology, Khorramabad Branch, Islamic Azad University, Khorramabad, Iran)
Salman Soori
2
(Department of Geology, Zahedan Branch, Islamic Azad University, Zahedan, Iran)
کلید واژه: AHP, Lorestan, landslide, Watershed, Ayvashan dam,
چکیده مقاله :
The landslide is one of the mass movement processes, which occurs in Iran and parts of the world every year. This phenomenon often causes significant loss of life and financial damages. Therefore, this study has been carried out to identify the factors affecting the landslide occurrence and to localize the landslide-prone areas in order to investigate the landslide hazard zonation of Ayvashan Dam Watershed using the Analytic Hierarchy Process (AHP) method. At the onset of the study, some of the most important factors that influence the occurrence of this phenomenon such as lithology, slope, precipitation, landuse, elevation, aspect, distance from drainages, and fault, as the independent variables, were prepared and digitized in the GIS software environment. Then the landslide areas were identified via the aerial photos and field surveys, and the landslide distribution maps of the watershed were prepared. In the next step, through the use of the AHP method, the factors examined in the previous step were compared in pairs, and the weight of each factor that indicates the degree of its influence on causing the landslides of the region has been calculated. According to the results of the landslide hazard zonation using the AHP, 14.85, 33.89, 23.75, 19.54, and 7.95 percent of the area of the region are located in very low, low, moderate, high, and very high risk classes respectively.
