• Home
  • لانه زنبوری
    • List of Articles لانه زنبوری

      • Open Access Article

        1 - Preparation of ZnO/CeO2 Nanocomposite Arrays within Monolithic Cordierite Honeycomb
        ایمان صفائی
        In this study, ordered ZnO/CeO2 nanocomposite arrays were synthesized within the monolithic cordierite honeycomb using a simple, green and cost effective hydrothermal method. Primary ZnO seeds with (0 0 2) texture were grown within honeycomb’s channels by dipping More
        In this study, ordered ZnO/CeO2 nanocomposite arrays were synthesized within the monolithic cordierite honeycomb using a simple, green and cost effective hydrothermal method. Primary ZnO seeds with (0 0 2) texture were grown within honeycomb’s channels by dipping technique and subsequent heating of the substrates at 350˚C. The average diameter of ZnO seed particles was estimated to be 60 nm from SEM micrographs by the use of Digimizer software. Highly aligned, compact and homogenous ZnO nanorod arrays with the diameter of 200 nm were formed in monolithic cordierite honeycomb by a novel two-step hydrothermal method at 80 oC. ZnO nanorod arrays were used as a core for the preparation of ceria coating. A ceria coating was deposited on ZnO nanorods in the second step of hydrothermal synthesis. Formation of ZnO and ceria phases was also confirmed by X-ray diffraction results. Manuscript profile
      • Open Access Article

        2 - خیز و ارتعاشات آزاد پنل ساندویچی با هسته لانه زنبوری بر بستر الاستیک وینکلر
        یونس یوسفی حسین وحدانی فر رضا شیرانی محمد دهقانی
        . در این مقاله به بررسی خیز و ارتعاشات آزاد پنل ساندویچی پرداخته‌شده است. هسته ساندویچ پنل از نوع لانه‌زنبوری شش‌وجهی و رویه‌های آن از دو ماده متفاوت Carbon fiber reinforced plastic و K-aryl/epoxy در نظر گرفته‌شده است. معادلات حاکم بر پایه تئوری تغییر شکل برشی مرتبه اول More
        . در این مقاله به بررسی خیز و ارتعاشات آزاد پنل ساندویچی پرداخته‌شده است. هسته ساندویچ پنل از نوع لانه‌زنبوری شش‌وجهی و رویه‌های آن از دو ماده متفاوت Carbon fiber reinforced plastic و K-aryl/epoxy در نظر گرفته‌شده است. معادلات حاکم بر پایه تئوری تغییر شکل برشی مرتبه اول استخراج گردیده و برای حل معادلات از روش عددی دیفرانسیل مربعات تعمیم‌یافته استفاده‌شده است. جهت اعتباربخشی به روش دیفرانسیل مربعات به‌کاررفته در این مقاله از روش کلاسیک با حل گالرکین ارائه‌شده در مراجع استفاده‌شده و نشان داده‌شده که روش دیفرانسیل مربعات تعمیم‌یافته به کار گرفته‌شده دارای نتایج خوب با درصد خطای نسبی پایین نسبت به مقاله مرجع یادشده است. تغییر شکل ایجادشده در پنل ساندویچی به ازای دو نوع بارگذاری متفاوت موردبررسی قرارگرفته است. درنهایت فرکانس‌های طبیعی برای چهار مد اول برای دو ماده متفاوت رویه‌ها به دست آورده شده و تأثیر نسبت‌های متفاوت طول به ضخامت هسته و نسبت ضخامت رویه‌ها به ضخامت هسته لانه‌زنبوری بر مقدار فرکانس طبیعی بررسی‌شده است. همچنین تأثیر ضریب سختی فونداسیون برخیز ایجادشده و فرکانس طبیعی، ارائه گردیده است. Manuscript profile