Subject Areas : journal of New Materials

رضا طاهرزاده موسویان ¹ (مربی،دانشگاه آزاد اسلامی، واحد زنجان، گروه متالورژی، زنجان، ایران.)
محمد رضا روشن ² (- کارشناسی ارشد مواد، بخش مهندسی مواد، دانشگاه شیراز.)
شهریار شرفی ³ (دانشیار، بخش مهندسی مواد، دانشگاه شهید باهنر کرمان.)
محمد حسین شریعت ⁴ (- استاد، بخش مهندسی مواد، دانشگاه دانشگاه آزاد اسلامی واحد مرودشت.)

Received: 2015-12-28 Accepted : 2015-12-28 Published : 2012-12-21

Keywords:

References:

1- W. Deqing, Effects of additives on

combustion synthesis of Al2O3–TiB2 ceramic

composite, Journal of the European Ceramic

Society 29, 1485–1492, 2009.

2- C.L. Yeh, and R.F. Li, Formation of TiB2–

Al2O3 and NbB2–Al2O3 composites by

combustion synthesis involving thermite

reactions, Chemical Engineering Journal 147,

405–411, 2009 .

3- T.S.R.Ch. Murthy, C. Subramanian, R.K.

Fotedar, M.R. Gonal, P. Sengupta, S. Kumar,

and A.K. Suri, Preparation and property

evaluation of TiB2 + TiSi2 composite, Int.

Journal of Refractory Metals & Hard Materials

27, 629–636, 2009.

4- M. Adeli, S.H. Seyedein, M.R. Aboutalebi,

M. Kobashi, and N. Kanetake, A study on the

combustion synthesis of titanium aluminide in

the self-propagating mode, Journal of Alloys

and Compounds 497, 100–104, 2010.

5- J.H. Lee, C.Y. An, C.W. Won, S.S. Cho,

and B.S. Chun, Characteristics of Al2O3–SiC

composite powder prepared by the selfpropagating

high-temperature synthesis

process and its sintering behavior, Materials

Research Bulletin 35, 945–954, 2000.

6- S. Hasani, M. Panjepour, and M.

Shamanian, Effect of atmosphere and heating

rate on mechanism of MoSi2n formation

during self-propagating high-temperature

synthesis, J Therm Anal Calorim, 107:1073–

1081, 2012.

7- C.L. Chu, C.Y. Chung, P.H. Lin, and S.D.

Wang, Fabrication of porous NiTi shape

memory alloy for hard tissue implants by

combustion synthesis, Materials Science and

Engineering A366, 114–119, 2004.

8- C.L. Yeh, and Y.G. Shen, Formation of

TiAl–Ti2AlC in situ composites by

combustion synthesis, Intermetallics 17, 169–

173, 2009.

9- Y. Kopit, The ability of systems based on

Ni, Al and Ti to be synthesized by selfpropagating

high-temperature synthesis (SHS),

Intermetallics 9, 387–393, 2001.

10 –ز .عباسی، م .ح .شریعت و س. جوادپور، تأثیر

فراسنجهای اجرایی بر سنتز احتراقی کامپوزیتهای نیترید

آلومینیوم -کاربید سیلیسیم با کاربرد منبع جامد نیتروژن به

کمک میکروویو، مجله مواد نوین/ جلد1 پ شماره 4

تابستان1390.

11- T. Singanahally A. Aruna, and S.

Mukasyan, Combustion synthesis and

nanomaterials, Current Opinion in Solid State

and Materials Science 12, 44–50, 2008.

12- G.B. Raju, and B. Basu, Development of

High Temperature TiB2-based Ceramics, Key

Engineering Materials Vol. 395, pp 89-124,

2009.

13- Li. Junshou, Z. Cai, H. Guo, B. Xu, and L.

Li, Characteristics of porous Al2O3–TiB2

ceramics fabricated by the combustion

synthesis, Journal of Alloys and Compounds

479, 803–806, 2009.

14- R. Taherzadeh Mousavian, S. Sharafi, and

M.H. Shariat, Microwave-assisted combustion

synthesis in a mechanically activated Al–

TiO2–H3BO3 system, Int. Journal of

Refractory Metals and Hard Materials 29, 281–

288, 2011.

15- R. Taherzadeh Mousavian, S. Sharafi, M.

R. Roshan, and M. H. Shariat, Effect of

mechanical activation of reagents’ mixture on

the high-temperature synthesis of Al2O3–TiB2

composite powder, J Therm Anal Calorim DOI

10.1007/s10973-010-1272-0.

16- M.A. Meyers, E.A. Olevsky, J. Ma, and M.

Jamet, Combustion synthesis/densification of

an Al2O3–TiB2 composite, Materials Science

and Engineering A311, 83–99, 2001.