Abstract :
Here, we report thermodegradation of poly)methyl methacrylate(/silver nanoparticle )PMMA/AgNP( nanocomposite networks synthesized by in-situ photoiniferter-mediated photopolymerization. The nanocomposite networks were prepared in the presence of 0.5 wt.%of AgNP and various amounts of allyl methacrylate )0, 1, 5, 10 wt.%( as crosslinking agent. The kinetic studies of thermodegradation of the nanocomposite networks by two isoconversional methods, Flynn-Wall-Ozawa and Kissinger–Akahira–Sunose, showed that AgNP had a dual effect on thermal degradation of PMMA networks; at early stages, AgNP promoted the degradation of the nanocomposites while in the subsequent stages maintained the polymer stability against thermal degradation.
References:
[1] Liu, C.; Li, X.; Wu, Y.; RSC Advances 5, 15354-15358, 2015.
[2] Torkian, L.; Amini, M.; Amereh, E.; Materials Science and Technology 28, 111-116, 2013.
[3] Marschilok, A.; Lee, S.H.; Milleville, C.; Chen, P.; Takeuchi, E.; Takeuchi, K.; J. Composite Materials 47, 33-40, 2013.
[4] Deshmukh, R.; Composto, R.; Chemistry of Materials 19, 745-754, 2007.
[5] Balan, L.; Schneider, R.; Lougnot, D.; Progress in Organic Coatings 62, 351-357, 2008.
[6] Dhiman, J.; Kundu, V.; Kumar, S.; Kumar, R.; Chakarvarti, S.; American Journal of Materials Science and Technology 3, 13-21, 2014.
[7] Kooti, M.; Kharazi, P.; Motamedi, H.; J.Materials Science & Technology 30, 656-660, 2014.
[8] Slane, J.; Vivanco, J.; Rose, W.; Ploeg, H.; Squire, M.; Materials Science and Engineering: C 48,188-196, 2015.
[9] Kassaee, M.; Akhavan, A.; Sheikh, N.; Sodagar, A.; J. Applied Polymer Science 110, 1699-1703,2008.
[10] Irzh, A.; Perkas, N.; Gedanken, A.; Langmuir 23, 9891-9897, 2007.
[11] Matyjaszewski, K.; American Chemical Society 768, 2000.
[12] Boyes, S.G.; Granville, A.; Baum, M.; Akgun, B.; Mirous, B.; Brittain, W.; Surface Science 570, 1-12, 2004.
[13] Bartholome, C.; Beyou, E.; Bourgeat-Lami, E.; Chaumont, P.; Zydowicz, N.; Macromolecules 36, 7946-7952, 2003.
[14] Baum, M.; Brittain, W.; Macromolecules 35, 610-615,2002.
[15] Rahane, S.; Kilbey, S.; Metters, A.; Macromolecules 41, 9612-9618,2008.
[16] Chattopadhyay, D.; Panda, S.; Raju, K.; Progress in Organic Coatings 54, 10-19,2005.
[17] Moszner, N.; Salz, U.; Progress in Polymer Science 26, 535-576, 2001.
[18] Otsu, T.; J. Polymer Science, Part A.: Polym Chem 38., 2121-2136, 2000.
[19] Lambrinos, P.; Tardi, M.; Polton, P.; Sigwalt, P.; European Polymer Journal 26,112-115,1990.
[20] Otsu.,T.; Matsunaga, T.; Dio, T.; Matsumoto, A.; European Polymer Journal 3, 78-90, 1995.
[21] Otsu, T.; Yoshida, M.; Tazaki, T.; A model for living radical polymerization Macromolecular Rapid Communication 3, 133-140, 1982.
[22] Lecouvet, B.; Bourbigot, S.; Sclavons, M.; Bailly, C.; Polymer Degradation and Stability 97, 1745-1754, 2012.
[23] Vyazovkin, S.; Dranca, I.; Fan, X; Advincula, R; Macromolecular Rapid Communication 25, 498-503, 2004.
[24] Hirata, T.; Kashiwagi, T.; Brown, J.; Macromolecules 18, 1410-1418, 1985.
[25] Goodarzi, V.; Jafari, S.; Khonakdar, H.; Monemian, S.; Mortazavi, M.; Polymer Degradation and Stability 95, 859-869, 2010.
[26] Ozawa, T.; Bulletin of the Chemical Society of Japan 38, 881-882, 1965.
[27] Flynn, J.; Wall, L.; J. Polymer Science Part B: Polymer Letters 4, 323-328, 1966.
[28] Rimez, B.; Rahier, H.; Van Assche, G.; Artoos, T.; Van Mele, B.; Polymer Degradation and Stability 93,1222-1230, 2008.
[29] Sbirrazzuoli, N.; Vincent, L.; Mija, A.; Guigo, N.; Chemometrics and Intelligent Laboratory Systems 96, 219-226, 2009.
[30] Ortega, A.; Thermochimica Acta 46, 74-81, 2008.
[31] Starink, M.; Thermochimica Acta 404, 163-176, 2003.
[32] Makvandi, P.; Nikfarjam, N.; Sanjani, N.; Qazvini, N.; Bulletin of Materials Science 38, 1625-1631, 2015.
[33] Podgórski, M.; Dental Materials 26, 188-194, 2010.
[34] Bershtein, V.; Egorova, L.; Yakushev, P.; Pissis, P.; Sysel, P.; Brozova, L.; J. Polymer Science Part B: Polym Phys 40, 1056-1069, 2002.
[35] Fragiadakis, D; Pissis, P; J. Non-Crystalline Solids 353, 4344-4352, 2007.
[36] Sun, Y; Zhang, Z; Moon, K; Wong, C; J. Polymer Science Part B: Polym Phys 42, 3849-3858, 2004.
_||_