Subject Areas :

هدایت اله صادقی قاری ¹ , زهرا شکوری ²

1 - مربی مهندسی صنایع پلیمر، دانشکده مهندسی پلیمر، واحد امیدیه، دانشگاه آزاد اسلامی، خوزستان، ایران
2 - مربی مهندسی صنایع پلیمر، باشگاه پژوهشگران جوان و نخبگان، واحد امیدیه، دانشگاه آزاد اسلامی، خوزستان، ایران

Received: 2013-08-23 Accepted : 2013-10-23 Published : 2013-11-22

Keywords:

References:

[1] Aprem, A.S.; Joseph, K.; Thomas S.; J. Appl. Polym. Sci., 91, 1068–1076, 2004.
[2] Wang, J.; Hamed, G.R.; Umetsu, K.; Roland, C.M.; Rubber Chem. Technol., 78, 76–83, 2005.

[3] Kaang, Sh.; Nah, Ch.; Polymer, 39, 2209-2214, 1998.
[4] Shah, J.; Yuan, Q.; Misra, R.D.K.; Materials Science and Engineering, A, 523, 199–206, 2009.
[5] Hamed, G.R.; Huang, M.Y.; Rubber Chem. Technol., 71, 846–860, 1998.
[6] Mott, P.H.; Roland, C.M.; Macromolecules, 2000, 33, 4132-4137
[7] Roland, C.M.; Peng, K.L.; Rubber Chem. Technol., 64, 790–800, 1991.
[8] Hamed, G.R.; Umetsu, K.; Rubber Chem. Technol., 78, 130–142, 2005.
[9] Kaang, Sh.; Gong, D.; Nah, Ch.; J. Appl. Polym. Sci., 65, 917–924, 1997.
[10] Kaang, Sh.; Nah, Ch.; Polymer, 39, 11, 2209-2214, 1998.
[11] Santangelo, P.G.; Roland, C.M.; Rubber Chem. Technol., 76, 892–898, 2004.
[12] Sadeghi-Ghari, H.; Jalali, A.A.; Shakouri, Z.; Iranian Journal of Polymer Science and Technology, 25, 2, 137-150, 2012.
[13] Jacob, A.; Kurian, P.; Aprem, A.S.; J. Appl. Polym. Sci., 108, 2623–2629, 2008.
[14] Marykutty, C.V.; Mathew, G.; Thomas, S.; Rubber Chem. Technol., 80, 809–819, 2007.
[15] Sperling, L.H.; Introduction to Physical Polymer Science, 4th ed. Wiley: New York, 472–473, 2006.
[16] Pojanavaraphan, T.; Magaraphan, R.; Eur. Polym. J., 44, 1968–1977, 2008.
[17] Shah, J.; Yuan, Q.; Misra, R.D.K.; Materials Science and Engineering A, 523, 199–206, 2009.
[18] Pojanavaraphan, T.; Schiraldi, D.A.; Magaraphan, R.; Appl. Clay Sci., 50, 271-279, 2010.
[19] George, S.C.; Thomas, S.; Prog. Polym. Sci., 26, 985-1017, 2001.
[20] Mathew, T.V.; Kuriakose, S.; Polym. Compos., 28, 15–22, 2007.
[21] Johnson, T.; Thomas, S.; polymer, 41, 7511-7522, 2000.
[22] Kader, M.A.; Bhowmick, A.K.; Polym. Eng. Sci., 43, 975-986, 2003.
[23] Sujith, A.; Unnikrishnan, G.; J. Polym. Research, 13, 171–180, 2006.
[24] Shakouri, Z.; Sadeghi-Ghari, H.; J. Appl. Researches in Chem.; Article in-Press, 2013.
[25] Pojanavaraphan, T.; Schiraldi, D.A.; Magaraphan, R.; Appl. Clay Sci., 50, 271-279, 2010.
[26] Johnson, T.; Thomas, S.; polymer, 41, 7511-7522, 2000.
[27] Igwe, I.O.; Ezeani, O.E.; International Journal of Polymer Science, Article ID: 212507, 1-11, 2012.
[28] Sadeghi-Ghari, H.; Shakouri, Z.; Iranian Journal of Polymer Science and Technology, 24 (3), 215-230, 2011.
[29] Li, Q.; Kim, N.H.; Yoo, G.H.; Lee, J.H.; Composites: Part B, 40, 218–224, 2009.
[30] Crittenden, J.; Ohlemacher, Double network formation during aging of a natural rubber vulcanizate, The University of Akron, p.H.D Thesis, 2005.
[31] Sadeghi-Ghari, H.; Shakouri, Z.; Rubber Chem. Technol., 86, 205–217, 2013.