Innovative Enhancements in Surface Quality and Hardness of Aluminium Alloy 2024 through an Optimized Burnishing Process
Subject Areas : advanced manufacturing technology
1 - Department of Mechanical Engineering, Mobarakeh branch, Islamic Azad University, Isfahan, Iran
Keywords: Aluminium Alloy 2024, Burnishing Process, Mechanical Properties, Statistical Analysis, Surface Quality,
Abstract :
The burnishing process showcases a novel approach for significantly improving the surface quality and hardness of metals, particularly aluminium, copper, and brass. This paper presents a novel approach to optimize the burnishing process of Aluminium 2024 by simultaneously analyzing the effects of spindle speed, feed rate, and burnishing force, a comprehensive method that has not been addressed in prior studies. Utilizing a specially designed roller-based tool with a lathe machine, we systematically varied key parameters—spindle speed, feed rate, and burnishing force—through a full factorial design with two repetitions. Advanced statistical analysis was conducted using Minitab software to assess the effects of these parameters on surface roughness and hardness, employing regression methods for precise predictions. Remarkably, the results demonstrated that optimal surface roughness (Ra = 0.05 μm) was attained at a feed rate of 0.11 mm/rev, spindle speed of 1000 r/min, and burnishing force of 1000 N. This research not only highlights the effectiveness of the burnishing process in enhancing the mechanical properties of aluminium alloys but also introduces innovative methodologies that pave the way for improved industrial applications. Future studies will investigate the effects of burnishing in corrosive environments and its impact on material strength.
[1] Thorat, S., Thakur, A., Optimization of Burnishing Parameters by Taguchi Based GRA Method of AA 6061 Aluminum Alloy, Materials Today: Proceedings, Vol. 5, No. 2, 2018, pp. 7394-7403.
[2] Samuel, A., et al. Effect of Machining of Aluminium Alloys with Emphasis on Aluminium 6061 Alloy–A Review, In IOP Conference Series: Materials Science and Engineering, IOP Publishing, 2021.
[3] Zhou, Z. Y., et al., Research on the Mechanism of The Two-Dimensional Ultrasonic Surface Burnishing Process to Enhance the Wear Resistance for Aluminum Alloy, Friction, Vol. 12, No. 3, 2024, pp. 490-509.
[4] Kumar, N., et al., Experimental Investigation of Effect of Roller Burnishing Process Parameters on Surface Roughness and Surface Hardness of C40E Steel, International Journal of Machining and Machinability of Materials, Vol. 18, No. 1-2, 2016, pp. 185-199.
[5] El-Tayeb, N., Low, K., and Brevern, P., Enhancement of Surface Quality and Tribological Properties Using Ball Burnishing Process, Machining Science and Technology, Vol. 12, No. 2, 2008, pp. 234-248.
[6] Raj, A., Chowdhury, A., and Ali, S. W., Green Chemistry: Its Opportunities and Challenges in Colouration and Chemical Finishing of Textiles, Sustainable Chemistry and Pharmacy, Vol. 27, 2022, pp. 100689.
[7] Raza, A., Kumar, S., A Critical Review of Tool Design in Burnishing Process, Tribology International, Vol. 174, 2022, pp. 107717.
[8] Amdouni, H., et al., Experimental Study of a Six New Ball-Burnishing Strategies Effects on The Al-Alloy Flat Surfaces Integrity Enhancement, The International Journal of Advanced Manufacturing Technology, Vol. 90, 201, pp. 2271-2282.
[9] Basak, H., Goktas, H. H., Burnishing Process on Al-Alloy and Optimization of Surface Roughness and Surface Hardness by Fuzzy Logic, Materials & Design, Vol. 30, No. 4, 2009, pp. 1275-1281.
[10] El-Tayeb, N., Low, K., and Brevern, p., Influence of Roller Burnishing Contact Width and Burnishing Orientation on Surface Quality and Tribological Behaviour of Aluminium 6061, Journal of Materials Processing Technology, Vol. 186, No. 1-3, 2007, pp. 272-278.