Subject Areas : Electrical Engineering

M. Kazeminejad ¹ , M. Ghaffarianfar ² , A. Hajizadeh ³

1 - Department of Electrical and robotic Engineering, Shahrood University of Technology, Shahrood, Iran.
2 - Department of Electrical and robotic Engineering, Shahrood University of Technology, Shahrood, Iran.
3 - Department of Electrical and robotic Engineering, Shahrood University of Technology, Shahrood, Iran.

Received: 2019-12-22 Accepted : 2019-04-27 Published : 2019-06-01

Keywords:

References:

[1] P. Kessel and H. Glavitsch, 1986, Estimating the voltage stability of a power system, IEEE Transactions on Power Delivery, vol. 1, pp. 346-354.

[2] M. Moghavvemi and M. Faruque, 2001, Technique for assessment of voltage stability in ill-conditioned radial distribution network, Power Engineering Review, IEEE, vol. 21, pp. 58-60.

[3] A. Chebbo, et al.,1992, Voltage collapse proximity indicator: behavior and implications, IEE Proceedings in Gener., Trans. and Distr., pp. 241-252.

[4] M. Eidiani, 2011, A reliable and efficient method for assessing voltage stability in transmission and distribution networks, International Journal of Electrical Power & Energy Systems, vol. 33, pp. 453-456.

[5] T. Ackermann, et al., 2001, Distributed generation: a definition, Electric Power Systems Research, vol. 57, pp. 195-204.

[6] R. Viral and D. Khatod, 2012, Optimal planning of distributed generation systems in distribution system: A review, Renewable and Sustainable Energy Reviews, vol. 16, pp. 5146-5165.

[7] Electric Power Research Institute (EPRI), 1993. Technical Assessment Guide, ed: TR Patent 102,276.

[8] N. Khalesi, et al., 2011, DG allocation with application of dynamic programming for loss reduction and reliability improvement, International Journal of Electrical Power & Energy Systems, vol. 33, pp. 288-295.

[9] N. S. Rau and Y. Wan, 1994, Optimum location of resources in distributed planning, IEEE Transactions on Power Systems, vol. 9, pp. 2014-2020.

[10] H. Hedayati, et al., 2008, A method for placement of DG units in distribution networks, IEEE Transactions on Power Delivery, vol. 23, pp. 1620-1628.

[11] J. Jamian, et al., 2012, Comparative Study on Distributed Generator Sizing Using Three Types of Particle Swarm Optimization, International Conference on Intelligent Systems, Modelling and Simulation, pp. 131-136.

[12] M. Moradi and M. Abedini, 2011, A combination of genetic algorithm and particle swarm optimization for optimal DG location and sizing in distribution systems, International Journal of Electrical Power & Energy Systems, vol. 34, pp. 66-74.

[13] C. L. T. Borges and D. M. Falcao, 2006, Optimal distributed generation allocation for reliability, losses, and voltage improvement, International Journal of Electrical Power & Energy Systems, vol. 28, pp. 413-420.

[14] K. H. Kim, et al.,2002, Dispersed generator placement using fuzzy-GA in distribution systems, Power engineering Society summer meeting, IEEE, vol. 3, pp. 1148-1153.

[15] A. Abou El-Ela, et al., 2010, Maximal optimal benefits of distributed generation using genetic algorithms, Electric Power Systems Research, vol. 80, pp. 869-877.

[16] C. A. Cañizares, 1998, Applications of optimization to voltage collapse analysis, IEEE/PES Summer meeting, San Diego, July 14.

[17] Rajkumar Viral, D.K.Khatod, 2012, Optimal planning of distributed generation systems in distribution system: A review, Renewable and Sustainable Energy Reviews 16, pp. 5146–5165.

[18] A. Wiszniewski, 2007, New criteria of voltage stability margin for the purpose of load shedding, IEEE Transactions on Power Delivery, vol. 22, pp. 1367-1371.

[19] K. V. Kumar and M. Selvan, 2008, A simplified approach for load flow analysis of radial distribution network, International Journal of Computer, Information, and Systems Science, and Engineering, vol. 2, p. 4.

[20] W. Wu and B. Zhang, 2008, A three-phase power flow algorithm for distribution system power flow based on loop-analysis method, International Journal of Electrical Power & Energy Systems, vol. 30, pp. 8-15.

[21] N. Mwakabuta, A. Sekar, 2007, Comparative Study of the IEEE 34 Node Test Feeder under Practical Simplifications, 39th North American Power Symposium, IEEE.