Effects of Active Material Particles Size Distribution on the Fabrication of TiNb2O7 Electrode Used in Lithium-Ion Batteries

Subject Areas : Materials synthesis and charachterization

Touraj  Adhami ¹ (Advanced Materials Research Center, Materials Engineering Department, Najafabad Branch, Islamic Azad University, Najafabad, Iran)
Reza  Ebrahimi-Kahrizsangi ² (Advanced Materials Research Center, Materials Engineering Department, Najafabad Branch, Islamic Azad University, Najafabad, Iran)
Hamid Reza  Bakhsheshi Rad ³ (Advanced Materials Research Center, Materials Engineering Department, Najafabad Branch, Islamic Azad University, Najafabad, Iran)
Somayeh  Majidi ⁴ (Department of Chemistry, Najafabad Branch, Islamic Azad University, Najafabad, Iran)
Milad  Ghorbanzadeh ⁵ (Materials and Energy Research Center, Karaj, Iran)

Received: 2021-03-14 Accepted : 2021-05-18 Published : 2021-08-01

Keywords:

References:

[1] Y. Liu, Y. Yang, “Recent progress of TiO₂-based anodes for Li ion batteries”, Journal of Nanomaterials, vol. 2016, 2016, pp. 1-15.

[2] S. K. Balasingam, M. Kundu, B. Balakrishnan, H. Kim, A. M. Sevensson, K. Jayasayee, “Hematite microdisks as an alternative anode material for lithium-ion batteries”, Materials Letters, vol. 247, 2019, pp. 163-166.

[3] S. Li, X. Cao, C. N. Schmidt, Q. Xu, E. Uchaker, Y. Pei, G. Cao, “TiNb₂O₇/graphene composites as high-rate anode materials for lithium/sodium ion batteries”, Journal of Materials Chemistry A, vol. 4, 2016, pp. 4242-4251.

[4] X. Xia, Sh. Deng, Sh. Feng, J. Wu, J. Tu, “Hierarchical porous Ti₂Nb₁₀O₂₉ Nanospheres as superior anode materials for lithium-ion storage”, Journal of Materials Chemistry A, vol. 5 2017, pp. 21134-21139.

[5] D. Pham-cong, J. Kim, V. T. Tran, S.J. Kim, S. Jeong, J. Choi, Ch. Cho, “Electrochemical behavior of interconnected Ti₂Nb₁₀O₂₉ nanoparticles for high-power Li-ion battery anodes”, Electrochimica Acta, vol. 236, 2017, pp. 451-459.

[6] G. Zhu, Y. Wang, Y. Xia, “Ti-based compounds as anode materials for Li-ion batteries”, Energy & Environmental Science, vol. 5, 2012, pp. 6652-6667.

[7] D. Aurbach, B. Markovsky, I. Weissman, E. Levi, Y. Ein-Eli, “On the correlation between surface chemistry and performance of graphite negative electrodes for Li ion batteries”, Electrochimica Acta, vol. 45, 1999, pp. 67-86.

[8] B. Michalak, H. Sommer, D. Mannes, A. Kaestner, T. Brezesinski, J. Janek, “Gas Evolution in Operating Lithium-Ion Batteries Studied in Situ by Neutron Imaging”, Scientific Reports, vol. 5, 2015, pp. 1-9.

[9] F. Rçder, S. Sonntag, D. Schrçder, U. Krewer, “Simulating the Impact of Particle Size Distribution on the Performance of Graphite Electrodes in Lithium-Ion Batteries”, Energy Technology, vol. 4, 2016, pp. 1-11.

[10] Zh. Wu, W. Ren, L. Wen, L. Gao, J. Zhao, Z. Chen, G. Zhou, F. Li, H. Cheng, “Graphene Anchored with Co₃O₄ Nanoparticles as Anode of Lithium-Ion Batteries with Enhanced Reversible Capacity and Cyclic Performance”, ACS Nano, vol. 4, 2010, pp. 3187-3194.

[11] G. T. Feya, Y. G. Chen, H. Kao, “Electrochemical properties of LiFePO₄ prepared via ball-milling”, Journal of Power Sources, vol. 189, 2009, pp. 169-178.

[12] Th. Drezen, N. Kwon, P. Bowen, I. Teerlinck, M. Isono, I. Exnar, “Effect of particle size on LiMnPO₄ cathodes”, Journal of Power Sources, vol. 189, 2009, pp. 169-178.

[13] T. Adhami, R. Ebrahimi-Kahrizsangi, H. R. Bakhsheshi-Rad, S. Majidi, M. Ghorbanzadeh, F. Berto, “Synthesis and electrochemical properties of TiNb₂O₇ and Ti₂Nb₁₀O₂₉ anodes under various annealing atmospheres”, Metals, vol. 11, 2021, pp. 1-12.

[14] A. R. Madram, R. Daneshtalab, M. R. Sovizi, “Effect of Na⁺ and K⁺ co-doping on the structure and electrochemical behaviors of LiFePO₄/C cathode material for lithium-ion batteries”, Royal Society of Chemistry, 2016, pp. 101477-101484.

[15] L. Buannic, J. Colin, Lise Daniel, S. Patoux, “Effect of syntheses and post synthetic treatments on mixed titanium niobium oxides for use as negative electrode in high power Li-ion batteries”, Electrochemical Society, 2013.