Optimal Shape Design for Heat Conduction and Convection Problems Using NURBS
Subject Areas :
Analytical and Numerical Methods in Mechanical Design
Farbod Fakhrabadi
1
,
Farshad Kowsary
2
1 - Department of Mechanical Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran
2 - School of Mechanical Engineering, Faculty of Engineering, University of Tehran, Tehran, Iran
Received: 2022-09-21
Accepted : 2022-09-21
Published : 2022-06-01
Keywords:
References:
Fabbri, G., 1997, “A Genetic Algorithm for Fin Profile Optimization,” Int. J. Heat Mass Transfer, 40, pp. 2165-2172.
Fabbri, G., 1998, “Heat Transfer Optimization in Internally Finned Tubes under Laminar Flow Conditions,” Int. J. Heat Mass Transfer, 41, pp. 1243-1253.
Fabbri, G., 1999, “Optimum Profiles for Asymmetrical Longitudinal Fins in Cylindrical Ducts,” Int. J. Heat Mass Transfer, 42, pp. 511-523.
Cheng, C. H., and Wu, C. Y., 2000, “An Approach Combining Body-Fitted Grid Generation and Conjugate Gradient Methods for Shape Design in Heat Conduction Problems,” Numerical Heat Transfer, Part B, 37, pp. 69-83.
Lan, C. H., Cheng, C. H., and Wu, C. Y., 2001, “Shape Design for Heat Conduction Problems Using Curvilinear Grid Generation, Conjugate Gradient, and Redistribution Methods,” Numerical Heat Transfer, Part A, 39, pp. 487-510.
Cheng, C. H., and Chang, M. H., 2003, “Shape Design for a Cylinder with Uniform Temperature Distribution on the Outer Surface by Inverse Heat Transfer Method,” Int. J. Heat Mass Transfer, 46, pp. 101-111.
Cheng, C. H., Chan, C. K., and Lai, G. J., 2008, “Shape Design of Millimeter-Scale Air Channels for Enhancing Heat Transfer and Reducing Pressure Drop,” Int. J. Heat Mass Transfer, 51, pp. 2335-2345.
Daun, K. J., Howell, J. R., and Morton, D. P., 2003, “Geometric Optimization of Radiative Enclosures through Nonlinear Programming,” Numerical Heat Transfer, Part B, 43, pp. 203-219.
Hilbert, R., Janiga, G., Baron, R., and Thevenin, D., 2006, “Multi-Objective Shape Optimization of a Heat Exchanger Using Parallel Genetic Algorithms,” Int. J. Heat Mass Transfer, 49, pp. 2567-2577.
Nobile, E., Pinto, F., and Rizetto, G., 2006, “Geometric Parameterization and Multiobjective Shape Optimization of Convective Periodic Channels,” Numerical Heat Transfer, Part B, 50, pp. 425-453.
Balagangadhar, D., and Roy, S., 2001 “Design Sensitivity Analysis and Optimization of Steady Fluid-Thermal Systems” Comput. Methods Appl. Mech. Engrg., 190, 5465-5479.
Landon, M. K., and Campo, A., 2004 “Optimal Shape for Laminar Natural Convective Cavities Containing Air and Heated from the Side” Int. Comm. Heat Mass Transfer, Vol. 26, No. 3, pp. 389-398.
Piegl, L., and Tiller, W., 1997, The NURBS Book, 2nd Ed., Springer-Verlag, Berlin.
Thompson, J. F., Warsi, Z. U. A., and Mastin, C. W., 1985, Numerical Grid Generation, Elsevier Science Publishing Co.
Fletcher, C. A. J., 1988, Computational Techniques for Fluid Dynamics 2, Springer-Verlag, Berlin.
Cheng, C. H., and Chang, M. H., 2003, “A Simplified Conjugate-Gradient Method for Shape Identification Based on Thermal Data,” Numerical Heat Transfer, Part B, 43, pp. 489-507.