Using an Appropriate Controller for Independent Current Control for Motoring of Force Windings of Bearing less Induction Motor
Subject Areas : journal of Artificial Intelligence in Electrical Engineering
1 -
Keywords:
Abstract :
[1] A. Chiba, and T. Fukao, (1998). " Optimal Design of Rotor Circuits in Induction type Bearingless Motors", IEEE Trans., on Magn., vol. 34, no. 4, pp. 2108-2110.
[2] T. Suzuki, A. Chiba, M. A. Rahman, and T. Fukao, (2000). "An Air-Gap-Flux-Oriented Vector Controller for Stable Operation of Bearingless Induction Motors", IEEE Trans., on Indus. Appl., vol. 36, no. 4, pp. 1069-1076.
[3] Y. He and H. Nian, (2003). “Analytical model and feedback control of the levitation force for an induction-type bearingless motor,” in Proceedings of the the 5th International Conference on Power Electronics and Drive Systems, pp. 242–246.
[4] T. Tera, Y. Yamauchi, A. Chiba, T. Fukao, and M. A. Rahman, (2006). " Performances of Bearingless and Sensorless Induction Motor Drive Based on Mutual Inductances and Rotor Displacements Estimation", IEEE Trans., on Indus., Elec., vol. 53, no. 1, pp. 187-194.
[5] T. Hiromi, T. Katou, A. Chiba, M. A. Rahman, and T. Fukao, (2007). " A Novel Magnetic Suspension-Force Compensation in Bearingless Induction-Motor Drive With Squirrel-Cage Rotor", IEEE Trans., on Indus. Appl., vol. 43, no. 1, pp. 66-76.
[6] S. Ueno, and Y. Okada, (2000). " Characteristics and Control of a Bidirectional Axial Gap Combined Motor–Bearing", IEEE/ASME Trans., on Mechatronics, vol. 5, no. 3, pp. 310-318.
[7] Z.-Q. Deng, X.-L. Wang, B. Li, L.-G. He, and Y.-G. Yan, (2003). “Study on independent control of the levitation subsystem of bearingless induction motors,” Proceedings of the Chinese Society of Electrical Engineering, vol. 23, no. 9, pp. 107–111.
[8] P. C. Loh, D. M. Vilathgamuwa, S. K. Tang, and H. L. Long, (2004). "Multilevel Dynamic Voltage Restorer", IEEE Power Elec., col. 2, no. 4, pp. 125-130.
[9] Y. Wang, Z.-Q. Deng, and X.-L.Wang, (2008). Direct torque control of bearingless induction motor,” Proceedings of the Chinese Society of Electrical Engineering, vol. 28, no. 21, pp. 80–84.
[10] T. Tera, Y. Yamauchi, A. Chiba, T. Fukao, and M. A. Rahman, (2006). " Performances of Bearingless and Sensorless Induction Motor
Drive Based on Mutual Inductances and Rotor Displacements Estimation", IEEE Trans., on Indus., Elec., vol. 53, no. 1, pp. 187-194.
[11] K. Asami, A. Chiba, M. A. Rahman, T. Hoshino, and A. Nakajima, (2005). " Stiffness Analysis of a Magnetically Suspended Bearingless Motor With Permanent Magnet Passive Positioning", IEEE Trans., on Magn., vol. 41, no. 10, pp. 3820-3822.
[12] [12] J. Amemiya, A. Chiba, D. G. Dorrell, and T. Fukao, (2005). " Basic Characteristics of a Consequent-Pole-Type Bearingless Motor", IEEE Trans., on Magn., vol. 41, no. 1, pp. 82-89.
[13] M. T. Bartholet, T. Nussbaumer, and J. W. Kolar, (2011). "Comparison of Voltage-Source Inverter Topologies for Two-Phase Bearingless Slice Motors", IEEE Trans., on Indus. Elec., vol. 58, no. 5, pp. 1921-1925.
[14] M. Nakagava, Y. Asano, A. Mizuguchi, A. Chiba, C. X. Xuan, M. Ooshima, M. Takemoto, T. Fukao, O. Ichigava, and D. G. Dorrell, (2006). "Optimization of Stator Design in a Consequent-Pole Type Bearingless Motor Considering Magnetic Suspension Characteristics", IEEE Trans., on Magn., vol. 42, no. 10, pp. 3422-3324.
[15] Chiba, D. Akamatsu, T. Fukao, M. A. Rahman, (2008). "An Improved Rotor Resistance Identification Method for Magnetic Field Regulation in Bearingless Induction Motor Drives", IEEE Trans., on Indus., Elec., vol. 55, no. 2, pp. 852-860.
[16] Chiba, T. Fukao, and M. A. Rahman, (2008). "Vibration Suppression of a Flexible Shaft With a Simplified Bearingless Induction Motor Drive", IEEE Trans., on Indus. Appl., vol. 44, no. 3, pp. 745-752.
[17] Laiho, A. Sinervo, J. Orivuori, K. Tammi, A. Arkkio, and K. Zenger, (2009). "Attenuation of Harmonic Rotor Vibration in a Cage Rotor Induction Machine by a Self-Bearing Force Actuator", IEEE Trans., on Magn., vol. 45, no. 12, pp. 5388-5398.
[18] A. Sinervo, and A. Arkkio, (2014). " Rotor Radial Position Control and its Effect on the Total Efficiency of a Bearingless Induction Motor With a Cage Rotor", IEEE Trans., on Magn., vol. 50, no. 4, pp. 1-9.
Naser Olad Abdollahi Aghdam : Using an appropriate controller for independent current control …
52
[19] X. Sun, L. Chen, Z. Yang, and H. Zhu, (2013). "Speed-Sensorless Vector Control of a Bearingless Induction Motor With Artificial Neural Network Inverse Speed Observer", IEEE/ASME Trans., on Mechatronics, vol. 18, no. 4, pp. 1357-1366.
[20] B. Wenshao, H. Shenghua, W. Shanming, and L. Wensheng, (2009). "General Analytical Models of Inductance Matrices of Four-Pole Bearingless Motors With Two-Pole Controlling Windings", IEEE Trans., on Magn., vol. 45, no. 9, pp. 3316-3321.
[21] E. F. Rodriguez, and J. A. Santisteban, (2011). "An Improved Control System for a Split Winding Bearingless Induction Motor", IEEE Trans., on Indus. Elec., vol. 58, no. 8, pp. 3401-3408.
[22] V. F. Victor, F. O. Quintaes, J. S. B. Lopes, L. D. S. Junior, A. S. Lock, and A. O. Salazar, (2012). "Analysis and Study of a Bearingless AC Motor Type Divided Winding, Based on a Conventional Squirrel Cage Induction Motor", IEEE Trans., on Magn., vol. 48, no. 11, pp. 3571-3574.
[23] A.S. Abdel-Khalik, S. Ahmed, and A. Massoud, (2014). "A bearingless coaxial magnetic gearbox", Alexanderia Engineering Journal, vol. 53, pp. 573-582.
[24] Golipour, Ahad. "Optimizing speed and angle control of stepping motor by using field oriented control." Journal of Artificial Intelligence in Electrical Engineering 3.11 (2014): 1-10.
[25] yaghobi, Saeideh, and sajad yaghobi. "Velocity Control of Electro Hydraulic Servo System by using a Feedback Error Learning Method." Journal of Artificial Intelligence in Electrical Engineering 3.11 (2014): 39-45.
