Thermodynamic analysis and optimization of the power piston Stirling engine beta can be used to increase the output power and efficiency

Subject Areas : Termodynamic

سید بهمن  حسین زاده ساداتی ¹ (دانشجوی کارشناسی ارشد مکانیک، گروه مهندسی مکانیک واحد سمنان ، دانشگاه آزاد اسلامی ، سمنان ، ایران)
Hadi  Kargar Sharifabad ² (مرکز تحقیقات انرژی و توسعه پایدار، واحد سمنان، دانشگاه آزاد اسلامی، سمنان، ایران)
نادر  رهبر ³ (مرکز تحقیقات انرژی و توسعه پایدار، واحد سمنان، دانشگاه آزاد اسلامی، سمنان، ایران)

Received: 2016-08-01 Accepted : 2016-08-02 Published : 2014-11-22

Keywords: Numerical simulation, Stirling engine, Adiabatic model, Power Piston,

Abstract :

The purpose of this article is to develop a thermodynamic model appropriate to be piston Stirling engine beta-type deformation is to increase efficiency and output power l. For this purpose, thermodynamic modeling is done in two parts, the first part was isothermal modeling and then using the results of numerical modeling to model the geometry of adiabatic method is performed. In fact, the results of the first part (modeling isothermal), as initial values of the second part (modeling adiabatic), is used. Modeling was performed using MATLAB software and by changing the diameter of the piston, the heat input, heat output and engine efficiency. The results obtained were compared with published values, compared.