Stiffeners Mechanical Effect Analysis by Numerical Coupling

Subject Areas : Engineering

R Naceur Bouharkat ¹ , A Sahli ² , S Sahli ³

1 - Laboratoire de Recherche des Technologies Industrielles, Université Ibn Khaldoun de Tiaret , Département de Génie Mécanique, Route de zaroura , Algérie
2 - Laboratoire de Recherche des Technologies Industrielles, Université Ibn Khaldoun de Tiaret , Département de Génie Mécanique, Route de zaroura , Algérie
3 - Université d'Oran 2 Mohamed Ben Ahmed, Algérie

Received: 2020-03-24 Accepted : 2019-05-20 Published : 2020-06-30

Keywords:

References:

[1] Barzegar F., Maddipudi S., 1994, Generating reinforcement in FE modelling of concrete structures, Journal of Structures Engineering 20(5): 1656-1662.
[2] Gomes H.M., Awruch A.M.S., 2001, Some aspects on three-dimensional numerical modelling of reinforced concrete structures using the finite element method, Advances in Engineering Software 32(4): 257-277.
[3] LE V., Anh et Royer J., 1996, Boundary formulation for three-dimensional anisotropic crack problems, Applied Mathematical Modelling 20(9): 662-674.
[4] Leonel E.D., 2006, Boundary Element Method Applied to Analysis of Multi-Fractured Solids, Sao Carlos, University of Sao Paulo.
[5] Leonel E.D., 2009, Nonlinear Boundary Element Method Models for Fracture Problem Analysis and Application of Reliability and Optimization Models in Fatigue Structures, São Carlos, Department of Structural Engineering.
[6] Oliveira Hugo Luiz et L., Edson D., 2013, Cohesive crack growth modelling based on an alternative nonlinear BEM formulation, Engineering Fracture Mechanics 111: 86-97.
[7] Oliveira Hugo Luiz et L., Edson D., 2013, Dual BEM formulation applied to analysis of multiple crack propagation, Key Engineering Materials 2013: 99-106.
[8] Nourine L., 2010, Boundary element method analysis of cracked anisotropic bodies, The Journal of Strain Analysis for Engineering Design 45: 45-56.
[9] Sahli A., 2014, Failure analysis of anisotropic plates by the boundary element method, Journal of Mechanics 30: 561-570.
[10] Sahli A., 2015, Effects of variation of material properties on the stress intensity factors of cracked anisotropic bodies, Matériaux & Techniques 103: 109.
[11] Debbagui S., Sahli A., Sahli S., 2017, Optimisation and failure criteria for composite materials by the bound-ary element method, Mechanics 23: 506-513.
[12] Kebdani S., Sahli A., Sahli S., 2018, Thermoelastic fracture parameters for anisotropic plates, Journal of Solid Mechanics 10: 435-449.
[13] Sahli A., Fatiha Arab M., Sahli S., 2019, Composite parameters analysis with boundary element method, Journal of Materials and Engineering Structures 5: 387-398.
[14] Kadri M., Sahli A., Sahli S., 2019, Fracture parameters for cracked cylindrical shells, Journal of Solid Mechanics 11: 91-104.
[15] Sahli A., Sahli S., Mechanical and structural reliability-based algorithm optimization, Journal of Materials and Engineering Structures 6: 215-232.
[16] Zienkiewicz O.C., Kelly D.W., Bettess P., 1977, The coupling of the finite element method and boundary solution procedures, International Journal for Numerical Methods in Engineering 11(2): 355-375.
[17] Shaw R.P., Falby W., 1978, FEBIE—a combined finite element-boundary integral equation method, Computers & Fluids 6(3): 153-160.
[18] Brebbia C.A., Georgiou P., 1979, Combination of boundary and finite elements in elastostatics, Applied Mathematical Modelling 3(3): 212-220.
[19] Wearing J. L., Burstow M. C., 1994, Elasto-plasticanalysis using a coupled boundary element finite element technique, Engineering Analysis with Boundary Elements 14(1): 39-49.
[20] Coda H.B., Venturini W.S., Aliabadi M. H., 1999, A general 3D BEM/FEM coupling applied to elastodynamic continua/frame structures interaction analysis, International Journal for Numerical Methods in Engineering 46(5): 695-712.
[21] Coda H.B., Venturini W.S., 1999, On the coupling of 3D BEM and FEM frame model applied to elastodynamic analysis, International Journal of Solids and Structures 36(31-32): 4789-4804.
[22] Elleithy W.M., Tanaka M., Guzik A., 2004, Interface relaxation FEM–BEM coupling method for elasto-plastic analysis, Engineering Analysis with Boundary Elements 28(7): 849-857.
[23] Ganguly S., Layton J.B., Balakrishna C., 2000, Symmetric coupling of multi‐zone curved Galerkin boundary elements with finite elements inelasticity, International Journal for Numerical Methods in Engineering 48(5): 633-654.
[24] Bia R.A., Ostrowski Z., Kassab A.J., Yin Q., Sciubba E., 2002, Coupling BEM, FEM and analytic solutions in steady-state potential problems, Engineering Analysis with Boundary Elements 26(7): 597-611.
[25] Coda H.B., 2001, Dynamic and static non-linear analysis of reinforced media: a BEM/FEM coupling approach, Computers & Structures 79(31): 2751-2765.
[26] Leite L.G., Coda H.B., Venturini W.S., 2003, Two-dimensional solids reinforced by thin bars using the boundary element method, Engineering Analysis with Boundary Elements 27(3): 193-201.
[27] Fernandes G.R., Venturini W. S., 2002, Non-linear boundary element analysis of plates applied to concreteslabs, Engineering Analysis with Boundary Elements 26(2): 169-181.
[28] Brebbia C.A., Domınguez J., 1992, Boundary Elements: An Introductory Course, Computational Mechanics Publications, McGraw Hill Company, London.
[29] Cruz J. M. F., 2012, Contribution to the Static and Dynamic Analysis of Frames by the Boundary Element Method, Federal University of Paraíba.