Reliability of the Rubber Tube of Automotive Hydraulic Braking System Under Fatigue Failures Considering Random Variation of Load and the Process of Aging of Material

Subject Areas : Mechanical Engineering

O Larin ¹ , K Potopalska ² , R Mygushchenko ³

1 - National Technical University, Kharkiv Polytechnic Institute, Kharkiv, Ukraine
2 - National Technical University, Kharkiv Polytechnic Institute, Kharkiv, Ukraine
3 - National Technical University, Kharkiv Polytechnic Institute, Kharkiv, Ukraine

Received: 2019-03-03 Accepted : 2018-04-23 Published : 2019-06-30

Keywords:

References:

[1] Renu R., Visotsky D., Knackstedt S., Mocko G., Summers J.D., Schulte J., 2016, A knowledge based FMEA to support identification and management of vehicle flexible component issues, Procedia CIRP 44: 157-162.
[2] Moon S., Cho I., Woo C., Kim W., 2011, Study on determination of durability analysis process and fatigue damage parameter for rubber component, Journal of Mechanical Science and Technology 25: 1159.
[3] Cho J.R., Yoon Y.H., Seo C.W., Kim Y.G., 2015, Fatigue life assessment of fabric braided composite rubber hose in complicated large deformation cyclic motion, Finite Elements in Analysis and Design 100: 65-76.
[4] Cho J-R., Yoon Y-H., 2016, Large deformation analysis of anisotropic rubber hose along cyclic path by homogenization and path interpolation methods, Journal of Mechanical Science and Technology 30: 789-795.
[5] Budinski M.K., 2013, Failure analysis of a rubber hose in anhydrous ammonia service, Case Studies in Engineering Failure Analysis 1: 156-164.
[6] Chandran D., Ng H.K., Lau H.L.N., Gan S., Choo Y.M., 2016, Investigation of the effects of palm biodiesel dissolved oxygen and conductivity on metal corrosion and elastomer degradation under novel immersion method, Applied Thermal Engineering 104: 294-308.
[7] Pierce S.O., Evans J.L., 2012, Failure analysis of a metal bellows flexible hose subjected to multiple pressure cycles, Engineering Failure Analysis 22: 11-20.
[8] Reza Kashyzadeh K., Farrahi G.H., Shariyat M., Ahmadian M.T., 2018, Experimental accuracy assessment of various high-cycle fatigue criteria for a critical component with a complicated geometry and multi-input random non-proportional 3D stress components, Engineering Failure Analysis 90: 534-553.
[9] Krismer S., 2003, Hydraulic hose failures caused by corrosion of the reinforcing strands, Practical Failure Analysis 3: 33-39.
[10] Pavloušková Z., Klakurková L., Man O., Čelko L., Švejcar J., 2015, Assessment of the cause of cracking of hydraulic hose clamps, Engineering Failure Analysis 56: 14-19.
[11] Noda N.-A., Yoshimura S., Kawahara H., Tuyunaru S., 2008, FEM Analysis for Sealing Performance of Hydraulic Brake Hose Crimped Portion and Its Life Estimation, Transactions of the Japan Society of Mechanical Engineers Series A 74(748): 1538-1543.
[12] Kwak S., Choi N., 2009, Micro-damage formation of a rubber hose assembly for automotive hydraulic brakes under a durability test, Engineering Failure Analysis 16: 1262-1269.
[13] Mars W.V., Fatemi A., 2002, A literature survey on fatigue analysis approaches for rubber, International Journal of Fatigue 24(9): 949-961.
[14] Fedorko G., Molnar V., Dovica M., Toth T., Fabianova J., 2015, Failure analysis of irreversible changes in the construction of the damaged rubber hoses, Engineering Failure Analysis 58: 31-43.
[15] Hansaka M., Ito M., 1999, Investigation on aging of train rubber hose, Quarterly Report of RTRI 40(2):105-111.
[16] Haseeb A.S.M.A., Jun T.S, Fazal M.A., Masjuki H.H., 2011, Degradation of physical properties of different elastomers upon exposure to palm biodiesel, Energy 36(3): 1814-1819.
[17] Lee G., Kim H., Park J., Jin H., Lee Y., Kim J., 2011, An experimental study and finite element analysis for finding leakage path in high pressure hose assembly, International Journal of Precision Engineering and Manufacturing 12: 537-542.
[18] Larin O.O., 2015, Probabilistic model of fatigue damage accumulation in rubberlike materials, Strength of Materials 47(6): 849-858.
[19] Larin O., Vodka O., 2015, A probability approach to the estimation of the process of accumulation of the high-cycle fatigue damage considering the natural aging of a material, International Journal of Damage Mechanics 24(2): 294-310.
[20] Wei Y., Nasdala L., Rothert H., Xie Z., 2004, Experimental investigations on the dynamic mechanical properties of aged rubbers, Polymer Testing 23: 447-453.
[21] Huang D., LaCount B.J., Castro J.M., Ignatz-Hoover F., 2001, Development of a service-simulating, accelerated aging test method for exterior tire rubber compounds i. cyclic aging, Polymer Degradation and Stability 74(2): 353-362.
[22] Coronado M., Montero G., Valdez B., Stoytcheva M., Eliezer A., García C., Campbell H., Pérez A., 2014, Degradation of nitrile rubber fuel hose by biodiesel use, Energy 68: 364-369.
[23] Larin O.O., Vodka O.O., Trubayev O.I., 2014, The fatigue life-time propagation of the connection elements of long-term operated hydro turbines considering material degradation, PNRPU Mechanics Bulletin 1(1):167-193.
[24] Bellander M., Gedde U.W., 2016, Degradation of carbon-black- fi lled acrylonitrile butadiene rubber in alternative fuels, Transesteri fied and hydrotreated vegetable oils, Polymer Degradation and Stability 123: 69-79.
[25] Barlow T.J., Latham S., Mccrae I.S., Boulter P.G., A Reference Book of Driving Cycles for Use in the Measurement of Road Vehicle Emissions, Published Project Report PPR354.