High Level Modeling of AES in QCA Technology
Subject Areas : Majlesi Journal of Telecommunication Devices
Mojdeh Mahdavi
1
(
Department of Electronics, Shahr-e-Qods Branch, Islamic Azad University, Tehran, Iran
)
Mohammad Amin Amiri
2
(
)
Keywords:
Abstract :
1] C.S. Lent, P.D. Tougaw, W. Porod and G.H. Bernstein; “Quantum cellular automata,” Nanotechnology, Vol.4, pp.49–57 (1993)
[2] K. Walus, V. Dimitrov, G.A. Jullien and W.C. Miller; “QCADesigner: A CAD Tool for an Emerging Nano-Technology,” Micronet Workshop, Available online (2003)
[3] Marco Ottavi, Luca Schiano and Fabrizio Lombardi; “HDLQ: A HDL Environment for QCA Design,” ACM J. on Emerging Tech. in Computing Systems, Vol.2, pp. 243–261 (2006)
[4] T. Teodosio and L. Sousa; “QCA-LG: A tool for the automatic layout generation of QCA combinational circuits,” Norchip Conference (2007)
[5] M.A. Amiri, M. Mahdavi and S. Mirzakuchaki; “QCA Implementation of A5/1 Stream Cipher,” 2nd Int. Conf. on Advances in Circuits, Elec. and Micro-elect. (2009)
[6] M.A. Amiri, S. Mirzakuchaki and M. Mahdavi; “Logic-Based QCA Implementation of a 4×4 S-Box,” Informacije MIDEM, Vol.40, pp. 197-203 (2010)
[7] M.A. Amiri, S. Mirzakuchaki and M. Mahdavi; “Cryptography in Quantum Cellular Automata,” Cellular Automata - Innovative Modelling for Science and Engineering, Dr. Alejandro Salcido (Ed.), InTech (2011)
[8] Karim, Fazal, and Konrad Walus; “Efficient simulation of correlated dynamics in quantum-dot cellular automata,” IEEE Trans. on Nanotechnology, Vol.13, pp.294-307 (2014)
[9] Yang, Xiaokuo, Li Cai, S. Wang, Zhuo Wang and C. Feng; “Reliability and performance evaluation of QCA devices with rotation cell defect,” IEEE Transactions on Nanotechnology, Vol.11, pp. 1009-1018 (2012)
[10] Das, Kunal and Debashis De; “A study on diverse nanostructure for implementing logic gate design for QCA,” International Journal of Nanoscience, Vol.10, pp. 263-269 (2011)
[11] V. Vankamamidi, M. Ottavi and F. Lombardi; “Two-dimensional schemes for clocking/timing of QCA circuits,” IEEE Trans. Comput.-Aided Des. Integr. Circuits Syst., Vol.27, pp. 34-44 (2008)
[12] K. Hennessy and C. S. Lent; “Clocking of Molecular Quantum-dot Cellular Automata,” J. Vac. Sci. Technol., Vol.19, pp. 1752-1755 (2001)
[13] D. Tougaw and M. Khatun; “A scalable signal distribution network for quantum-dot cellular automata,” IEEE Transactions on Nanotechnology, Vol.12, pp. 215-224 (2013)
[14] J. S. Chandra, K. Suresh and B. Ghosh; “Clocking Scheme Implementation for Multi-Layered Quantum Dot Cellular Automata Design,” Journal of Low Power Electronics, Vol.10, pp. 272-278 (2014)
[15] Advanced Encryption Standard (AES), http://www.csrc.nist.gov/publications/fips/fips197/fips-197.pdf
[16] Minjun Yan; “Electric Field Detection by Electrostatic Force Microscopy for Clocking Quantum dot Cellular Automata Molecules,” PhD Thesis, University of Notre Dame, Notre Dame, Indiana (2006)
[17] Mo Liu; “Robustness and Power Dissipation in Quantum-dot Cellular Automata,” PhD Thesis, University of Notre Dame, Notre Dame, Indiana, (2006)
[18] Huang Yin, He Debiao, Kang Yong and Fei Xiande, “High-speed ASIC implementation of AES supporting 128/192/256 bits,” International Conference on Test and Measurement (2009)
[19] Tim Good and Mohammad Benaissa, “692-nW Advanced Encryption Standard (AES) on a 0.13-µm CMOS,” IEEE Transactions on VLSI Systems, Vol.18, no. 12, pp. 1753-1757 (2010)
