Function Generation Synthesis of the Four-bar Linkage Based on Four and Five Precision Points using Newton-HCM

Subject Areas : Mechanical Engineering

Seyyed Mojtaba Varedi-Koulaei ¹

1 - Department of Mechanical and Mechatronics Engineering, Shahrood University of Technology, Iran

Received: 2022-07-06 Accepted : 2022-10-04 Published : 2022-12-01

Keywords:

References:

• Kachapi, S. H., Ganji, D. D., Davodi, A. G., and Varedi, S. M., Periodic Solution for Strongly Nonlinear Vibration Systems by He's Variational Iteration Method, Mathematical Methods in the Applied Sciences, Vol. 32, No. 18, 2009, pp. 2339-2349, DOI: 1002/mma.1135.


• Kosari, A., Jahanshahi, H., and Razavi, A. A., Design of Optimal PID, Fuzzy and New Fuzzy-PID Controller for CANSAT Carrier System Thrust Vector, ADMT Journal, Vol. 8, No. 2, 2015, pp. 1-9.


• Varedi-Koulaei, S. M., Rezagholizadeh, H., Synthesis of the Four-Bar Linkage as Path Generation by Choosing the Shape of The Connecting Rod, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 234, No. 13, 2020, pp. 2643-2652, DOI: 1177/0954406220908616.


• Chebyshev, P. L., Theorie Des Mecanismes Connaissent Comme Parallelogrames, Memoires Presenes à l’Academie Imperial Des Sciences De St.- Petersbourg Par Divers Savants, 1854, pp. 539-568.


• Freudenstein, F., An Analytical Approach to The Design of Four-Link Mechanisms, Trans. ASME, Vol. 76, 1954, pp. 483–492, DOI: 1115/1.4014881.


• Rao, A. C., Kinematic Design of Four-Bar Function Generators with Optimum Sensitivity, Mech Mach Theory, Vol. 10, 1975, pp. 531–535, DOI: 1016/0094-114X(75)90008-7.


• Rao, A. C., Optimum Design of Four-Bar Function Generators with Minimum Variance Criterion, J Optim Theory Appl, Vol. 29, No. 1, 1979, pp. 147–153, DOI: 10.1007/BF00932641.


• Sun, W., Optimum Design Method for Four-Bar Function Generators, J. Optim Theory Appl, Vol. 38, No. 2, 1982, pp. 287–293, DOI: 10.1007/BF00934089.


• Chen, F. Y., Chan, V. L., Dimensional Synthesis of Mechanisms for Function Generator Using Marguardt’s compromise, J. Eng Ind, Vol. 96, 1974, pp. 131–137, DOI: 1115/1.3438287.


• Guj, G., Dong, Z. Y., and Giacinto, M. D., Dimensional Synthesis of Four Bar Linkage for Function Generation with Velocity and Acceleration Constraints. Meccanica, Vol. 16, No. 4, 1981, pp. 210–219, DOI: 10.1007/BF02128323.


• Söylemez, E., Freudenstein, F., Transmission Optimization of Spatial 4-Link Mechanisms, Mech Mach Theory, Vol. 17, No. 4, 1982, pp. 263–283, DOI: 1016/0094-114X(82)90050-7.


• Gosselin, C., Angeles, J., Optimization of Planar and Spherical Function Generators as Minimum-Defect Linkages, Mech Mach Theory, Vol. 24, No. 4, 1989, pp. 293–307, DOI: 1016/0094-114X(89)90049-9.


• Angeles, J., Alivizatos, A., and Akhras, R., An Unconstrained Nonlinear Least-Square Method of Optimization of RRRR Planar Path Generators, Mech Mach Theory, Vol. 23, No. 5, 1988, pp. 343–353, DOI: 1016/0094-114X(88)90048-1.


• Akhras, R., Angeles, J., Unconstrained Nonlinear Least-Square Optimization of Planar Linkages for Rigid-Body Guidance, Mech Mach Theory, Vol. 25, No. 1, 1990, pp. 97–118, DOI: 1016/0094-114X(90)90110-6.


• Shariati, M., Norouzi, M., Optimal Synthesis of Function Generator of Four-Bar Linkages Based on Distribution of Precision Points, Meccanica, Vol. 46, 2011, pp. 1007–1021, DOI: 10.1007/s11012-010-9357-1.


• Daniali, H. M., Varedi, S. M., Dardel, M., and Fathi, A., A Novel Algorithm for Kinematic and Dynamic Optimal Synthesis of Planar Four-bar Mechanisms with Joint Clearance, Journal of Mechanical Science and Technology, Vol. 29, No. 5, 2015, pp. 2059-2065, DOI: 10.1007/s12206-015-0426-1.


• Farajtabar, M., Daniali, H. M., and Varedi, S. M., Pick and Place Trajectory Planning of Planar 3-Rrr Parallel Manipulator in The Presence of Joint Clearance, Robotica, Vol. 35, No. 2, 2017, pp. 241-253. DOI: 10.1017/S0263574714002768.


• Sardashti, A., Daniali, H. M., and Varedi, S. M., Optimal Free-Defect Synthesis of Four-Bar Linkage with Joint Clearance Using PSO Algorithm, Meccanica, Vol. 48, No. 7, 2013, pp. 1681-1693, DOI: 10.1007/s11012-013-9699-6.


• Penunuri, F., Peon Escalante, R., Villanueva, C. and Pech Oy, D., Synthesis of Mechanism for Single- and Hybrid-Tasks Using Differential Evolution. Mech Mach Theory, Vol. 46, No. 10, 2011, pp. 1335-1349, DOI: 1016/j.mechmachtheory.2011.05.013.


• Shpli, O. A., Genetic Algorithms in Synthesis of Path Generator Four-Bar Mechanism with Maximum Mechanical Advantage. ASM 2007, The 16th IASTED International Conference on Applied Simulation and Modelling; 2007 Aug 29-31, Palma de Mallorca, Spain, California: ACTA Press, pp. 154-161.


• Fernández-Bustos, I., Aguirrebeitia, J., Avilés, R., and Angulo, C., Kinematical Synthesis of 1-Dof Mechanisms Using Finite Elements and Genetic Algorithm, Finite Elements in Analysis and Design, Vol. 41, No. 15, 2005, pp. 1441-1463, DOI: 1016/j.finel.2005.04.001.


• Cabrera, J. A., Simon, A., and Prado, M., Optimal Synthesis of Mechanisms with Genetic Algorithms, Mech Mach Theory, 37, 2002, pp. 1165–1177, DOI: 1016/S0094-114X(02)00051-4.


• Wampler, C. W., Solving the Kinematics of Planar Mechanisms, ASME Journal of Mechanical Design, Vol. 121, 1999, pp. 387-391, DOI: 1115/1.2829473.


• Wampler, C.W., Solving the Kinematics of Planar Mechanisms by Dixon Determinant and a Complex-Plane Formulation, ASME J. Mechanical Design, Vol. 123, 2001, 3382–387, DOI: 10.1115/1.1372192.


• Wampler, C. W., Sommese, A. J., Numerical Algebraic Geometry and Algebraic Kinematics, Acta Numerica, 2011, pp. 469–567, DOI: 1017/S0962492911000067.


• Varedi, S. M., Daniali, H. M., and Ganji, D. D., Kinematics of an Offset 3-Upu Translational Parallel Manipulator by The Homotopy Continuation Method, Nonlinear Analysis: Real World Applications, Vol. 10, 2009, pp. 1767–1774, DOI: 1016/j.nonrwa.2008.02.014.


• Tari, H., Su, H. J., and Li, T. Y., A Constrained Homotopy Technique for Excluding Unwanted Solutions from Polynomial Equations Arising in Kinematics Problems, Mech Mach Theory, Vol. 45, No. 6, 2010, pp. 898–910, DOI: 1016/j.mechmachtheory.2010.01.002.


• Tari, H. Su, H. J., A Complex Solution Framework for The Kinetostatic Synthesis of a Compliant Four-Bar Mechanism, Mech Mach Theory, Vol. 46, No. 8, 2011, pp. 1137–1152, DOI: 1016/j.mechmachtheory.2011.03.003.


• Shafiee-Ashtiani, M., Yousefi-Koma, A., Keshavarz, H., and Varedi-Koulaei, S. M., Real Time Direct Kinematics Solution of 3-RPS Parallel Robot Using a Semi-Analytical Homotopy Method, Modares Mechanical Engineering, Vol. 17, No. 6, 2017, pp. 303-310 (in Persian).


• Varedi-Koulaei, S. M., Rahimi, M., Direct Kinematics Solution of 3-RCC Parallel Robot using a Semi-Analytical Homotopy Method, ADMT Journal, Vol. 12, No. 1, 2019, pp. 1-12.