Manuscript ID : ADMT-2101-1241 (R1)
Visit : 266
Page: 113 - 118
10.30495/admt.2021.1920377.1241
Article Type:
Original Research
Prediction of Material Removal Rate in Ductile–Mode Micro Ultrasonic Machining
Subject Areas :
advanced manufacturing technology
Hamid Zarepour
1
1 - Department of Mechanical Engineering, Modern Manufacturing Technologies Research Center (MMTRC), Najafabad Branch, Islamic Azad University, Najafabad, Iran
Received: 2021-01-11
Accepted : 2021-05-31
Published : 2021-12-01
Keywords:
References:
Egashira, K., Taniguchi, T., Tsuchiya, H., and Miyazaki, M., Microultrasonic Machining Using Multitools, in Progress of Machining Technology- Proceedings of the Seventh International Conference on Progress Machining Technology, 2004, pp. 297-301.
Zhang, C., Rentsch, R., and Brinksmeier, E., Advances in Micro Ultrasonic Assisted Lapping of Microstructures in Hard–brittle Materials: a Brief Review and Outlook, International Journal of Machine Tools and Manufacture, Vol. 45, 2005, pp. 881-890.
Al-okaily, A., Sundaram, M. M., and Rajurkar, K. P., Adaptive Control and Process Stability of Micro Ultrasonic Machining, Proceedings of the 5th International Conference on MicroManufacturing (ICOMM/4M), Madison, Wisconsin, USA, 2010, pp. 209-215.
Zarepour, H., Precision Force Measurement and Control in Micro Ultrasonic Machining, International Journal of Advanced Design and Manufacturing Technology, Vol. 10, No. 3, 2017, pp. 11-17.
Jain, A. K., Pandey, P. M., Narasaiah, K., Gopinath, S., and Venkitakrishnan, P. V., Effect of Tool Design Parameters Study in Micro Rotary Ultrasonic Machining Process, The International Journal of Advanced Manufacturing Technology, Vol. 98, 2018, pp. 1267-1285.
Yu, Z., Hu, X., and Rajurkar, K. P., Study of Micro Ultrasonic Machining of Silicon, Proceedings of 2005 ASME International Mechanical Engineering Congress and Exposition, Orlando, Florida, USA, 2005, pp. 1063-1070.
Brinksmeier, E., Preuss, W., and Schmutz, J., Manufacture of Microstructures by Ultrasonic Lapping, Proceedings of the 13th Annual Meeting of the American Society for Precision Engineering, 1998, pp. 169-172.
Kuriyagawa, T., Shirosawa, T., Saito, O., and Syoji, K., Micro Ultrasonic Abrasive Machining for Three-Dimensional Milli-Structures of Hard–brittle Materials, Proceedings of the 16th Annual Meeting of the ASPE, Crystal City, Virginia, USA, 2001, pp. 593-600.
Hu, X., Yu, Z., and Rajurkar, K. P., Experimental Study of Micro Ultrasonic Vibration Machining, Processing and Fabrication of Advanced Materials XIV with Frontiers in Materials Science 2005: Innovative Materials and Manufacturing Techniques, Pittsburgh, Pennsylvania, USA, 2005, pp. 197-210.
Hu, X., Yu, Z., and Rajurkar, K. P., State-of-the-art Review of Micro Ultrasonic Machining, Proceedings of the International Conference on Manufacturing Science and Engineering, 2006, pp. 1017-1024.
Hu, X., Mechanism, Characteristics and Modeling of Micro Ultrasonic Machining, Ph.D. Thesis, The University of Nebraska - Lincoln, Nebraska, United States, 2007.
Agarwal, S., On the Mechanism and Mechanics of Material Removal in Ultrasonic Machining, International Journal of Machine Tools and Manufacture, Vol. 96, 2015, pp. 1-14.
Li, G., Yu, Z., Song, J., Li, C., Li, J., and Natsu, W., Material Removal Modes of Quartz Crystals by Micro USM, Procedia CIRP, Vol. 42, 2016, pp. 842-846.
Zarepour, H., Yeo, S. H., Predictive Modeling of Material Removal Modes in Micro Ultrasonic Machining, International Journal of Machine Tools and Manufacture, Vol. 62, 2012, pp. 13-23.