Numerical Analysis of Heat Transfer and Temperature Distribution in Direct Metal Laser Sintering Method

Subject Areas : advanced manufacturing technology

Farshid Rajabi ¹ , Arman Maroufi ² , Cyrus Aghanajafi ³ , Mohammad Mehdi Kasaei ⁴

1 - Department of Mechanical Engineering, Faculty of Industrial and Mechanical Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran
2 - Department of Mechanical Engineering, Faculty of Industrial and Mechanical Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran
3 - Department of Mechanical Engineering K.N.Toosi University of Technology, Tehran, Iran
4 - Department of Mechanical Engineering, Faculty of Industrial and Mechanical Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran

Received: 2021-01-17 Accepted : 2021-05-31 Published : 2021-12-01

Keywords:

References:

• Herzog, D., Seyda, V., Wycisk, E., and Emmelmann, C., Additive Manufacturing of Metals, Journal of Acta Materialia, Vol. 117, No. 15, 2016, pp. 371-92.


• Simchi, A., Petzoldt, F., and Pohl, H., On the Development of Direct Metal Laser Sintering for Rapid Tooling, Journal of Materials Processing Technology, Vol. 141, No. 3, 2003, pp. 319-28.


• Karapatis, N. P., Van Griethuysen, J. P. S., and Glardon, R, Direct Rapid Tooling: A Review of Current Research, Journal of Rapid prototyping, Vol. 4, No. 2, 1998, pp. 77-89.


• Tang, Y., Loh, H. T., Wong, Y. S., Fuh, J. Y. H., Lu, L., and Wang, , Direct Laser Sintering of a Copper-Based Alloy for Creating Three-Dimensional Metal Parts, Journal of Materials Processing Technology, Vol. 140, No. 1-3, 2003, pp. 368-72.


• Simchi, A., Direct Laser Sintering of Metal Powders: Mechanism, Journal of Kinetics and Microstructural Features, Materials Science and Engineering, Vol. 428, No. 1-2, 2006, pp. 148-58.


• Dong, L., Makradi, A., Ahzi, S., and Remond, Y., Three-Dimensional Transient Finite Element Analysis of the Selective Laser Sintering Process, Journal of Materials Processing Technology, Vol. 209, No. 2, 2009, pp. 700-6.


• Zeng, K., Deepankar, P., and Stucker, B., A Review of Thermal Analysis Methods in Laser Sintering and Selective Laser Melting, Journal of in Proceedings of Solid Freeform Fabrication Symposium Austin, TX, Vol. 60, No. 1, 2012, pp. 796-814.


• Jian, X., Weimin, S., and Rana, S. R., 3D Modeling and Testing of Transient Temperature in Selective Laser Sintering (SLS) Process, Journal of Optik, Vol. 124, No. 4, 2013, pp. 301–4.


• Li, Y., Dongdong, G., Parametric Analysis of Thermal Behavior During Selective Laser Melting Additive Manufacturing of Aluminum Alloy Powder, Journal of Materials & Design, Vol. 63, No.1, 2014, pp. 856-67.


• Yuan, P., Gu, D., Molten Pool Behaviour and Its Physical Mechanism During Selective Laser Melting of TiC/AlSi10Mg Nanocomposites: Simulation and Experiments, Journal of Physics D: Applied Physics, Vol. 48, No. 3, 2015, pp. 1–16.


• Shi, Q., Gu, D., Xia, M., Cao, S., and Rong, T., Effects of Laser Processing Parameters On Thermal Behavior and Melting/Solidification Mechanism During Selective Laser Melting of TiC/Inconel 718 composites, Journal of Optics & Laser Technology, Vol. 84, No. 1, 2016, pp. 9–22.


• Hu, H., Ding, X., and Wang, L., Numerical Analysis of Heat Transfer During Multi-Layer Selective Laser Melting of AlSi10Mg, Journal of Optik, Vol. 127, No. 20, 2016, pp. 8883–91.


• Kundakcioglu, E., Lazoglu, I., and Rawal, S., Transient Thermal Modeling of Laser-Based Additive Manufacturing for 3D Freeform Structures, Journal of Advanced Manufacturing Technology, Vol. 85, No. 20, 2016, pp. 493–501.


• Lee, W. H., Zhang, Y., and Zhang, J., Discrete Element Modeling of Powder Flow and Laser Heating in Direct Metal Laser Sintering Process, Journal of Powder Technology, Vol. 315, No. 1, 2017, pp. 300–08.


• Ning, J., Wang, W., Ning, X., Sievers, D. E., Garmestani, H., and Liang, S. Y., Analytical Thermal Modeling of Powder Bed Metal Additive Manufacturing Considering Powder Size Variation and Packing, Journal of Materials Vol. 13, No. 8, 2020, pp. 1988.


• Ning, J., Sievers, D. E., Garmestani, H., and Liang, S. Y., Analytical Modeling of In-Process Temperature in Powder Bed Additive Manufacturing Considering Laser Power Absorption, Latent Heat, Scanning Strategy, And Powder Packing, Journal of Materials, Vol. 12, No. 5, 2019, pp. 808.


• Criales, L. E., Arısoy, Y. M., and Özel, T., Sensitivity Analysis of Material and Process Parameters in Finite Element Modeling of Selective Laser Melting of Inconel 625, Journal of Advanced Manufacturing Technology, Vol. 86, No. 9-12, 2016, pp. 2653-66.


• Dong, L., Correia, J. P. M., Barth, N., and Ahzi. S., Finite Element Simulations of Temperature Distribution and of Densification of a Titanium Powder During Metal Laser Sintering, Journal of Additive Manufacturing, Vol. 13, No. 1, 2017, pp. 37-48.


• Ning, J., Sievers, D. E., Garmestani, H., and Liang, S. Y., Analytical Thermal Modeling of Metal Additive Manufacturing by Heat Sink Solution, Journal of Materials, Vol. 12, No. 16, 2019, pp. 2568.